Weight | 1 kg |
---|---|
Dimensions | 34.5 × 20 × 5.5 cm |
Army | USA |
Brands | |
Materials | Plastic |
Product | |
Pack | Single |
Scale | 1/35 |
Theme | AFV, Military |
AK Points
Availability: In stock
93,50€
Brand: AFV Club
Title: U.S Army M110 8-inch (203mm) self-propelled howitzer
Number: AF35110
Scale: 1:35
Type: Complete kit
Marca: AFV Club
Título: Obús autopropulsado M110 del Ejército de los Estados Unidos de América de 8 pulgadas (203mm)
Número: AF35110
Escala: 1:35
Tipo: Kit completo
Weight | 1 kg |
---|---|
Dimensions | 34.5 × 20 × 5.5 cm |
Army | USA |
Brands | |
Materials | Plastic |
Product | |
Pack | Single |
Scale | 1/35 |
Theme | AFV, Military |
AK8064
12,75€The Wet Palette is a tool mainly used by figure painters, but more and more it is being used by people that paint with acrylics any kind of model. It will extend the useful life of any acrylic so that it can be used for hours and once shut it will preserve the colors and color mixtures. It can be kept in the fridge.
It has three components:
1.Sponge, to hold large quantities of water, since it is quite thick.
2.Cloth made of fiber, placed on top of the sponge as a leveler, humidity filter, and as an interchangeable element in case of stains or if not used for a long time.
3.High quality special Paper, made of a fine silicone film, allows the transfer of humidity but prevents water forming and paints from dissolving, and does not give off any fibers not hairs when worked with the brushes.
The Wet Palette is watertight and airtight, made of the same material of marine containers for flares, charts, and medicines. Its locks guarantee the seal. This extends the life of paints, especially in Summer, hot climates, and under extreme conditions.
*Dimensions: 16 x 13 x 4 cm.
It contains:
?· Need more info? Click here
La paleta húmeda es una herramienta utilizada principalmente por los pintores de figuras, pero cada vez más es utilizada por las personas que pintan con acrílicos cualquier tipo de modelo. Prolonga la vida útil de cualquier acrílico para que pueda ser utilizado durante horas y, una vez cerrado, conserva los colores y las mezclas de colores. Se puede conservar en la nevera.
Tiene tres componentes:
1.Esponja, para retener grandes cantidades de agua, ya que es bastante gruesa.
2.Paño de fibra, colocado encima de la esponja como nivelador, filtro de humedad, y como elemento intercambiable en caso de manchas o si no se utiliza durante mucho tiempo.
3.Papel especial de alta calidad, hecho de una fina película de silicona, permite la transferencia de humedad pero evita que se forme agua y que se disuelvan las pinturas, y no desprende fibras ni pelos cuando se trabaja con los pinceles.
La paleta húmeda es estanca y hermética, fabricada con el mismo material de los contenedores marinos para bengalas, cartas de navegación y medicamentos. Sus cierres garantizan la estanqueidad. Esto prolonga la vida de las pinturas, especialmente en verano, en climas cálidos y en condiciones extremas.
*Dimensiones: 16 x 13 x 4 cm.
Contiene:
¿Necesita más información? Haga clic aquí
ABT114
6,50€For precision works is necessary to keep the tip of your brushes in a perfect state. This gel is indicated to keep the tip sharp and in perfect use condition with all brushes fibers compacted and never open or deformed. With this gel you will keep your brushes always like new ones after using and cleaning them (it can be used after the application of our ABT117 Magic Potion for Brushes or any other chemical or natural cleaner).
Para trabajos de precisión es necesario mantener la punta de sus pinceles en perfecto estado. Este gel está indicado para mantener la punta afilada y en perfecto estado de uso con todas las fibras de los pinceles compactadas y nunca abiertas o deformadas. Con este gel mantendrá sus pinceles siempre como nuevos después de usarlos y limpiarlos (se puede utilizar después de la aplicación de nuestra Poción Mágica para Pinceles ABT117 o cualquier otro limpiador químico o natural).
FA 614
18,95€A set designed for thorough cleaning of any airbrush.
A glass jar with a plastic screw cap is used to purge the airbrush with the cleaner after each use. Thanks to a special filter in the upper part, all impurities and liquid remain in the container. Additionally, the lid is equipped with an airbrush stand.
Cleaners and rods are used to thoroughly clean various elements of airbrushes: tips, nozzles, bodies and other elements. The needle, on the other hand, cleans the inside of the airbrush nozzle or other internal parts of the airbrush, such as the needle guide channel.
Container Height: 85mm, diameter: 100mm.
Un conjunto diseñado para la limpieza a fondo de cualquier aerógrafo.
Se usa un frasco de vidrio con un tapón de rosca de plástico para purgar el aerógrafo con el limpiador después de cada uso. Gracias a un filtro especial en la parte superior, todas las impurezas y líquidos permanecen en el recipiente. Además, la tapa está equipada con un soporte para aerógrafo.
Los limpiadores y las varillas se utilizan para limpiar a fondo varios elementos de los aerógrafos: puntas, boquillas, cuerpos y otros elementos. La aguja, por otro lado, limpia el interior de la boquilla del aerógrafo u otras partes internas del aerógrafo, como el canal de guía de la aguja.
Altura del contenedor: 85 mm, diámetro: 100 mm.
MAGNET ULTRA RESISTANT CYANOCRYLATE GLUE
AK12015
7,60€20g.
General-purpose cyanoacrylate 401. Fast drying, extra strong, low viscosity, specially formulated for adhesion between materials that can even have an acidic surface. Can be used with rubber, leather, wood, metal, resin and plastic. The surfaces to be joined must be free of dirt, dust and grease. A small amount of adhesive should be applied; more cyanoacrylate does not guarantee a better bond and makes more difficult the drying of the adhesive that is effective for bonding.
– 99% Cyano.
– Ethyl cyanoacrylate
– Use temperature: -55º to 120º
– Set time: between 3 and 10 seconds. The gaps and uneven surfaces can increase this setting time. It is not necessary to use clamps. Holding the pieces firmly for 10-30 seconds will ensure better adhesion.
– Definitive cure time: 24 h
– Viscosity: 110 mPa.S
– Shear strength: 21.0 MPa
* Bottles are not filled at a 100% to leave some air and make it work properly.
20g.
Cianoacrilato de uso general 401, secado rápido, extra fuerte, baja viscosidad especialmente formulado para la adhesión entre materiales que incluso pueden tener una superficie ácida. Se puede usar con caucho, cuero, madera, metal, resina y plástico. Las superficies a unir deben estar libres de suciedad, polvo y grasa. Se debe aplicar una pequeña cantidad de adhesivo; más cianoacrilato no garantiza una mejor unión y hace más difícil el secado del adhesivo que es efectivo para la unión.
– 99% Cyano
– Cianoacrilato de etilo
– Temperatura de uso: -55º a 120º
– Tiempo de fraguado: entre 3 y 10 segundos. Los huecos y las superficies irregulares pueden aumentar este tiempo de fraguado. No es necesario usar abrazaderas. Sostener las piezas firmemente durante 10-30 segundos asegurará una mejor adhesión.
– Tiempo de curado definitivo: 24 h.
– Viscosidad: 110 mPa.S
– Resistencia al corte: 21.0 MPa
*Las botellas no se llenan al 100% para dejar algo de aire y que funcione correctamente.
TOP LINE DELUXE Marta Kolinsky KIT
ABT850
78,75€AK9204
6,50€ENGLISH
FAQ3
67,95€464 Pages. Soft Cover. More than 2.500 images.
This new Super-Book, like its predecessors in this same series of technical manuals called “FAQ”, is dedicated to modeling military vehicles and the techniques used for assembling, painting and weathering.
The difference with the previous book is that we have moved on in the timeframe and this book is a complement of the previous ones. It also explains some new techniques that have appeared these last years, mainly to use in modern vehicles but that can be also used in vehicles of all eras. The most complete book for military vehicles edited until now. The materials that make up modern vehicles and weapons have changed considerably since World War II. Materials that were out of the question on a technological and industrial level back then are now commonplace. The use of these new materials and the manufacturing and assembly methods reflect on the way we paint and weather these models; they require a different approach. Like many other things in life, in the end the purpose is to take up new challenges. In this book we present some of those challenges.
Simply essential for the modeller of military vehicles.
GET YOUR DIGITAL COPY AT AK-INTERACTIVE APP for iOS and Android
464 Páginas. Tapa blanda. Más de 2.500 imágenes.
Este nuevo Superlibro, al igual que sus predecesores en esta misma serie de manuales técnicos llamados “Preguntas frecuentes”, se dedica a modelar vehículos militares y las técnicas utilizadas para ensamblar, pintar y envejecer.
La diferencia con el libro anterior es que hemos avanzado en el tiempo y este libro es un complemento de los anteriores. También explica algunas técnicas nuevas que han aparecido estos últimos años, principalmente para usar en vehículos modernos, pero que también se pueden usar en vehículos de todas las épocas. El libro más completo para vehículos militares editado hasta ahora. Los materiales que componen los vehículos y armas modernas han cambiado considerablemente desde la Segunda Guerra Mundial. Los materiales que estaban fuera de discusión a nivel tecnológico e industrial en ese momento ahora son comunes. El uso de estos nuevos materiales y los métodos de fabricación y montaje se reflejan en la forma en que pintamos y envejecemos estos modelos; requieren un enfoque diferente. Como muchas otras cosas en la vida, al final el propósito es asumir nuevos desafíos. En este libro presentamos algunos de esos desafíos.
Simplemente esencial para el modelista de vehículos militares.
OBTENGA SU COPIA DIGITAL EN LA APLICACIÓN AK-INTERACTIVE para iOS y Android
AK11505
7,95€
AK9009
9,90€Precision cutting pliers with an ergonomic handle covered with an orange non-slip vinyl foam, with a spring return.
They make a clean and precise cut. No need to touch up.
Suitable for parts or rods of plastic, PVC, resin or ABS less than 4mm.
Do not use to cut metal parts.
Alicates de corte de precisión con mango ergonómico cubierto con espuma de vinilo naranja, antideslizante y con muelle de retorno.
Realizan un corte limpio y preciso sin que sea necesario retocar.
Adecuado para piezas o varillas de plástico, PVC, resina o ABS menores de 4mm.
No utilizar para cortar piezas de metal.
AK050
5,90€Our odorless turpentine is very different from our white spirit. Besides being odorless, this product is softer and less aggressive than our White Spirit. This property of the odorless thinner (Turpentine) makes it great for delicate, soft and subtle blending. This thinner is exclusive to enamel and oil paint. This larger bottle gives you more thinner and costs less when compared to buying three 35ml bottles.
100 ml.
Nuestra trementina inodora es muy diferente de nuestro white spirit. Además de ser inodoro, este producto es más suave y menos agresivo que nuestro White Spirit. Esta propiedad del diluyente inodoro (Turpentine) lo hace ideal para mezclas delicadas, suaves y sutiles. Este diluyente es exclusivo para esmalte y pintura al óleo. Esta botella más grande le proporciona más diluyente y cuesta menos en comparación con la compra de tres botellas de 35 ml.
100 ml.
AK8064
12,75€The Wet Palette is a tool mainly used by figure painters, but more and more it is being used by people that paint with acrylics any kind of model. It will extend the useful life of any acrylic so that it can be used for hours and once shut it will preserve the colors and color mixtures. It can be kept in the fridge.
It has three components:
1.Sponge, to hold large quantities of water, since it is quite thick.
2.Cloth made of fiber, placed on top of the sponge as a leveler, humidity filter, and as an interchangeable element in case of stains or if not used for a long time.
3.High quality special Paper, made of a fine silicone film, allows the transfer of humidity but prevents water forming and paints from dissolving, and does not give off any fibers not hairs when worked with the brushes.
The Wet Palette is watertight and airtight, made of the same material of marine containers for flares, charts, and medicines. Its locks guarantee the seal. This extends the life of paints, especially in Summer, hot climates, and under extreme conditions.
*Dimensions: 16 x 13 x 4 cm.
It contains:
?· Need more info? Click here
La paleta húmeda es una herramienta utilizada principalmente por los pintores de figuras, pero cada vez más es utilizada por las personas que pintan con acrílicos cualquier tipo de modelo. Prolonga la vida útil de cualquier acrílico para que pueda ser utilizado durante horas y, una vez cerrado, conserva los colores y las mezclas de colores. Se puede conservar en la nevera.
Tiene tres componentes:
1.Esponja, para retener grandes cantidades de agua, ya que es bastante gruesa.
2.Paño de fibra, colocado encima de la esponja como nivelador, filtro de humedad, y como elemento intercambiable en caso de manchas o si no se utiliza durante mucho tiempo.
3.Papel especial de alta calidad, hecho de una fina película de silicona, permite la transferencia de humedad pero evita que se forme agua y que se disuelvan las pinturas, y no desprende fibras ni pelos cuando se trabaja con los pinceles.
La paleta húmeda es estanca y hermética, fabricada con el mismo material de los contenedores marinos para bengalas, cartas de navegación y medicamentos. Sus cierres garantizan la estanqueidad. Esto prolonga la vida de las pinturas, especialmente en verano, en climas cálidos y en condiciones extremas.
*Dimensiones: 16 x 13 x 4 cm.
Contiene:
¿Necesita más información? Haga clic aquí
ABT114
6,50€For precision works is necessary to keep the tip of your brushes in a perfect state. This gel is indicated to keep the tip sharp and in perfect use condition with all brushes fibers compacted and never open or deformed. With this gel you will keep your brushes always like new ones after using and cleaning them (it can be used after the application of our ABT117 Magic Potion for Brushes or any other chemical or natural cleaner).
Para trabajos de precisión es necesario mantener la punta de sus pinceles en perfecto estado. Este gel está indicado para mantener la punta afilada y en perfecto estado de uso con todas las fibras de los pinceles compactadas y nunca abiertas o deformadas. Con este gel mantendrá sus pinceles siempre como nuevos después de usarlos y limpiarlos (se puede utilizar después de la aplicación de nuestra Poción Mágica para Pinceles ABT117 o cualquier otro limpiador químico o natural).
FA 614
18,95€A set designed for thorough cleaning of any airbrush.
A glass jar with a plastic screw cap is used to purge the airbrush with the cleaner after each use. Thanks to a special filter in the upper part, all impurities and liquid remain in the container. Additionally, the lid is equipped with an airbrush stand.
Cleaners and rods are used to thoroughly clean various elements of airbrushes: tips, nozzles, bodies and other elements. The needle, on the other hand, cleans the inside of the airbrush nozzle or other internal parts of the airbrush, such as the needle guide channel.
Container Height: 85mm, diameter: 100mm.
Un conjunto diseñado para la limpieza a fondo de cualquier aerógrafo.
Se usa un frasco de vidrio con un tapón de rosca de plástico para purgar el aerógrafo con el limpiador después de cada uso. Gracias a un filtro especial en la parte superior, todas las impurezas y líquidos permanecen en el recipiente. Además, la tapa está equipada con un soporte para aerógrafo.
Los limpiadores y las varillas se utilizan para limpiar a fondo varios elementos de los aerógrafos: puntas, boquillas, cuerpos y otros elementos. La aguja, por otro lado, limpia el interior de la boquilla del aerógrafo u otras partes internas del aerógrafo, como el canal de guía de la aguja.
Altura del contenedor: 85 mm, diámetro: 100 mm.
MAGNET ULTRA RESISTANT CYANOCRYLATE GLUE
AK12015
7,60€20g.
General-purpose cyanoacrylate 401. Fast drying, extra strong, low viscosity, specially formulated for adhesion between materials that can even have an acidic surface. Can be used with rubber, leather, wood, metal, resin and plastic. The surfaces to be joined must be free of dirt, dust and grease. A small amount of adhesive should be applied; more cyanoacrylate does not guarantee a better bond and makes more difficult the drying of the adhesive that is effective for bonding.
– 99% Cyano.
– Ethyl cyanoacrylate
– Use temperature: -55º to 120º
– Set time: between 3 and 10 seconds. The gaps and uneven surfaces can increase this setting time. It is not necessary to use clamps. Holding the pieces firmly for 10-30 seconds will ensure better adhesion.
– Definitive cure time: 24 h
– Viscosity: 110 mPa.S
– Shear strength: 21.0 MPa
* Bottles are not filled at a 100% to leave some air and make it work properly.
20g.
Cianoacrilato de uso general 401, secado rápido, extra fuerte, baja viscosidad especialmente formulado para la adhesión entre materiales que incluso pueden tener una superficie ácida. Se puede usar con caucho, cuero, madera, metal, resina y plástico. Las superficies a unir deben estar libres de suciedad, polvo y grasa. Se debe aplicar una pequeña cantidad de adhesivo; más cianoacrilato no garantiza una mejor unión y hace más difícil el secado del adhesivo que es efectivo para la unión.
– 99% Cyano
– Cianoacrilato de etilo
– Temperatura de uso: -55º a 120º
– Tiempo de fraguado: entre 3 y 10 segundos. Los huecos y las superficies irregulares pueden aumentar este tiempo de fraguado. No es necesario usar abrazaderas. Sostener las piezas firmemente durante 10-30 segundos asegurará una mejor adhesión.
– Tiempo de curado definitivo: 24 h.
– Viscosidad: 110 mPa.S
– Resistencia al corte: 21.0 MPa
*Las botellas no se llenan al 100% para dejar algo de aire y que funcione correctamente.
TOP LINE DELUXE Marta Kolinsky KIT
ABT850
78,75€AK9204
6,50€ENGLISH
ED7059
13,50€ProfiPACK edition kit of Soviet Cold War jet aircraft MiG-15bis in 1/72 scale.
Kit de edición ProfiPACK del avión de reacción MiG-15bis de la Guerra Fría soviética en escala 1/72.
G4 with armament, WWII German Car 1/35
ICM 35530
33,95€The three-axle G4 passenger car was designed by Daimler-Benz in 1934 and was produced until 1939. This heavy six-seater off-road vehicle with an eight-cylinder engine with an output of 100 (later 110) hp was designed for high-ranking officials of the Third Reich, as well as for the army, where it was used as a staff car (under the designation Kfz.21). The G4 was produced as a four-door sedan with a folding roof. This car was too complex and expensive for mass production, so it was made in a relatively small quantity.
Some trucks were equipped with MG 34 machine guns. They served to transport high command staff of the Wehrmacht, as well as guards and escorts. Vehicles in this variant were called Partisanenwagen.
El automóvil de pasajeros G4 de tres ejes fue diseñado por Daimler-Benz en 1934 y se fabricó hasta 1939. Este pesado vehículo todoterreno de seis plazas con un motor de ocho cilindros con una potencia de 100 (luego 110) hp fue diseñado para altas -funcionarios de rango del Tercer Reich, así como para el ejército, donde se usó como automóvil del estado mayor (bajo la designación Kfz.21). El G4 se fabricó como un sedán de cuatro puertas con techo plegable. Este automóvil era demasiado complejo y costoso para la producción en masa, por lo que se fabricó en una cantidad relativamente pequeña.
Algunos camiones estaban equipados con ametralladoras MG 34. Sirvieron para transportar personal de alto mando de la Wehrmacht, así como guardias y escoltas. Los vehículos de esta variante se llamaron Partisanenwagen.
Escala
1:35
Periodo de tiempo
WW2
Tamaño del modelo (largo x alto)
158 x 54 mm
Tamaño de caja
295 x 225 x 40 mm
Numero de detalles
307 + 20
1/48 Boeing F/A-18F Super Hornet
MM LS-013
72,50€As the latest F / A-18 variants, the F / A-18E / F aircraft have greatly improved electronic equipment and extended combat radius. To perform the missions like air superiority and ground attack and complex tasks including reconnaissance and electronic warfare, the F / A-18F’s rear cockpit weapon systems operator has new advanced cockpit displays and control system. The pilot and the weapon systems operator can perform air-to-air and air-to-ground tasks at the same time. Before the next-generation carrier-based fighters enter service, the F / A-18F will still be the main combat aircraft of the U.S. aircraft carrier battle group.
MENG releases this brand-new LS-013 Boeing F/A-18E Super Hornet model kit licensed by The Boeing Company. The finished model will be 377.9mm long and 273.4mm wide. This kit includes pre-cut stainless steel PE parts and pre-cut painting masks.
LS-013 Boeing F/A-18F Super Hornet
Scale: 1/48
Release in: July 2021
Flaps and slats can be installed in retracted or deployed positions.
Horizontal stabilizers and rudders are movable.
The two-seat variant’s cockpit and cockpit interior equipment are precisely replicated.
The specially designed pluggable main pylons allow the easy change of weapons; this kit includes AGM-65 air-to-ground missiles and GBU-16 laser-guided bombs.
Two U.S. Navy pilot figures featuring realistic gestures and finely replicated suit and equipment are included. Two flight helmet options are provided.
This kit includes optional exterior parts.
Como las últimas variantes del F / A-18, los aviones F / A-18E / F tienen equipos electrónicos muy mejorados y un radio de combate extendido. Para realizar misiones como superioridad aérea y ataque terrestre y tareas complejas que incluyen reconocimiento y guerra electrónica, el operador de sistemas de armas de la cabina trasera del F / A-18F tiene nuevas pantallas de cabina y un sistema de control avanzados. El piloto y el operador de sistemas de armas pueden realizar tareas aire-aire y aire-tierra al mismo tiempo. Antes de que los cazas basados en portaaviones de próxima generación entren en servicio, el F / A-18F seguirá siendo el principal avión de combate del grupo de batalla de portaaviones de EE. UU.
MENG lanza este nuevo kit modelo LS-013 Boeing F / A-18E Super Hornet con licencia de The Boeing Company. El modelo terminado tendrá 377,9 mm de largo y 273,4 mm de ancho. Este kit incluye piezas de PE de acero inoxidable precortadas y máscaras de pintura precortadas.
LS-013 Boeing F / A-18F Super Hornet
Escala: 1/48
Lanzamiento: julio de 2021
Las aletas y las lamas se pueden instalar en posiciones retraídas o desplegadas.
Los timones y estabilizadores horizontales son móviles.
La cabina del piloto y el equipamiento interior de la cabina de la variante de dos asientos se reproducen con precisión.
Los pilones principales enchufables especialmente diseñados permiten el cambio fácil de armas; este kit incluye misiles aire-tierra AGM-65 y bombas guiadas por láser GBU-16.
Se incluyen dos figuras de piloto de la Marina de los EE. UU. Con gestos realistas y un traje y equipo finamente replicados. Se proporcionan dos opciones de casco de vuelo.
Este kit incluye piezas exteriores opcionales.
HUSKY MK. III VMMD W/Interrogation arm 1/35
AFV AF35354
72,50€■ Highly detailed forward mounted interrogation arm.
■ Decals for Husky MK III with interrogation arm configuration.
■ Brazo de interrogación montado en la parte delantera altamente detallado.
■ Calcomanías para Husky MK III con configuración de brazo de interrogación.
PZW 9789198477610
26,95€Wingspan Vol.4. 1/32nd Scale Aircraft Modelling Book.
The fourth volume in this exciting series continues to showcase the popular 1:32 aircraft scale. The landscape format and large photos afford the opportunity to explore the models closely, and to truly appreciate the level of detail achievable in this scale. Full-page close-ups and overall views are combined with step-by-step instructions to depict each model to its full potential.
Book Data
Authors & Modellers: Jan Kopecký, Ralph Riese, Anders Isaksson, Henrik Redin, Brian Criner, Tomás Banic, Mikael Terfors, Zdenek Sebesta, Oto Drobik, Toni Canfora
ISBN: 9789198477610
Language: English
Photos: 300+ colour photos
Pages: 128
Physical: Softcover, 290x210mm, landscape
Models
Do-335 Pfeil
MIG-23 Flogger
FW-190A-8
Polikarpov I-16
FE-2b
F-5E Tiger II
P-51A Mustang
F-35 Lightning II
P.11C
C-47 Dakota
Wingspan Vol.4. Libro de modelismo de aviones a escala 1/32.
El cuarto volumen de esta emocionante serie sigue mostrando la popular escala de aviones 1:32. El formato apaisado y las fotos de gran tamaño permiten explorar los modelos de cerca y apreciar realmente el nivel de detalle que se puede alcanzar en esta escala. Los primeros planos y las vistas generales a toda página se combinan con las instrucciones paso a paso para mostrar todo el potencial de cada modelo.
Datos del libro
Autores y modelistas: Jan Kopecký, Ralph Riese, Anders Isaksson, Henrik Redin, Brian Criner, Tomás Banic, Mikael Terfors, Zdenek Sebesta, Oto Drobik, Toni Canfora
ISBN: 9789198477610
Idioma: Inglés
Fotos: Más de 300 fotos en color
Páginas: 128
Formato: Tapa blanda, 290x210mm, apaisado
Modelos
Do-335 Pfeil
MIG-23 Flogger
FW-190A-8
Polikarpov I-16
FE-2b
F-5E Tiger II
P-51A Mustang
F-35 Lightning II
P.11C
C-47 Dakota
MM MT-003
115,75€Front & rear shock absorbers and the steering damper are movable
Metalic Fuel Tank, Seat Hump Cover and engine cylinder
Viny seats and backrest realistic as real motorcycle
Stainless steel PE Parts and pre colored PE Parts
All light represented by clear parts
*Scale 1/9
Los amortiguadores delanteros y traseros y el amortiguador de dirección son móviles
Tanque de combustible metálico, cubierta de la joroba del asiento y cilindro del motor
Asientos y respaldo de vinilo realistas como una motocicleta real.
Piezas de PE de acero inoxidable y piezas de PE precoloreadas
Toda la luz representada por partes claras
* Escala 1/9
AFV AF35328
45,50€■ Centurion MK 5/1 glacis armour.
■ Front and rear mudguards.
■ Model A Ordnance QF 20-pounder.
■ Model B Ordnance QF 20-pounder.
■ One piece road wheels.
■ Searchlight.
■ Rearview mirror.
■ Decals for Centurion MK 5 and Centurion MK 5/1 in BOAR liveries.
■ Armadura glacis Centurion MK 5/1.
■ Guardabarros delantero y trasero.
■ Modelo A Artillería QF de 20 libras.
■ Artillería modelo B QF de 20 libras.
■ Ruedas de carretera de una pieza.
■ Reflector.
■ Espejo retrovisor.
■ Calcomanías para Centurion MK 5 y Centurion MK 5/1 en colores BOAR.
MJEZ35019
16,95€SCALE : 1/35
3D PRINTED
EASY ASSEMBLING AND HIGH RESOLUTION.
ESCALA: 1/35
IMPRESO EN 3D
FÁCIL MONTAJE Y ALTA RESOLUCIÓN.
FCM 36, French Light Tank in German Service 1/35
ICM 35337
36,95€After the defeat of France in the summer of 1940, a large number of French armored vehicles fell into the hands of the Wehrmacht. Many samples went to the winners in perfect condition. Later, the German army used them in various combat operations, and also used them as auxiliary and training equipment.
Among the captured samples were the FCM 36 tanks, which were previously part of two French tank battalions. Before the defeat of France, they managed to take part in several combat episodes in the spring and summer of 1940. The total number of these combat vehicles received by the Wehrmacht numbered about 50 copies. Later, many of them became the basis for the creation of self-propelled anti-tank guns and self-propelled howitzers.
Después de la derrota de Francia en el verano de 1940, una gran cantidad de vehículos blindados franceses cayó en manos de la Wehrmacht. Muchas muestras llegaron a los ganadores en perfectas condiciones. Posteriormente, el ejército alemán los utilizó en diversas operaciones de combate, y también los utilizó como equipo auxiliar y de entrenamiento.
Entre las muestras capturadas se encontraban los tanques FCM 36, que anteriormente formaban parte de dos batallones de tanques franceses. Antes de la derrota de Francia, lograron participar en varios episodios de combate en la primavera y el verano de 1940. El número total de estos vehículos de combate recibidos por la Wehrmacht ascendía a unas 50 copias. Más tarde, muchos de ellos se convirtieron en la base para la creación de cañones antitanques autopropulsados y obuses autopropulsados.
Escala
1:35
Periodo de tiempo
WW2
Marcas
Panzerkampfwagen 737 FCM (f), aproximadamente 1940
FCM 36, tanque 30061 del cuarto batallón de tanques francés. Capturado por las fuerzas alemanas en junio de 1940
FCM 36, tanque 30022 del 7 ° batallón de tanques francés. Capturado por las fuerzas alemanas en junio de 1940
Tamaño del modelo (largo x alto)
126 x 62 mm
Tamaño de caja
295 x 225 x 40 mm
Numero de detalles
158
RTD35661
9,99€WWII Series – 3D Resin Printed
High-detailed 3D Resin Printed Set.
Serie WWII – Resina impresa en 3D
Conjunto impreso en resina 3D de gran detalle.
Tracks for M5 Stuart Late, M8 HMC 1/35
MTL-35149
32,50€Metal Tracks for M5 Stuart Late, M8 HMC
Scale 1/35
Cadenas metalicas para M5 Stuart Late, M8 HMC
Escala 1/35
MJEZ35020
16,95€SCALE : 1/35
3D PRINTED
EASY ASSEMBLING AND HIGH RESOLUTION.
ESCALA: 1/35
IMPRESO EN 3D
FÁCIL MONTAJE Y ALTA RESOLUCIÓN.
ED7059
13,50€ProfiPACK edition kit of Soviet Cold War jet aircraft MiG-15bis in 1/72 scale.
Kit de edición ProfiPACK del avión de reacción MiG-15bis de la Guerra Fría soviética en escala 1/72.
G4 with armament, WWII German Car 1/35
ICM 35530
33,95€The three-axle G4 passenger car was designed by Daimler-Benz in 1934 and was produced until 1939. This heavy six-seater off-road vehicle with an eight-cylinder engine with an output of 100 (later 110) hp was designed for high-ranking officials of the Third Reich, as well as for the army, where it was used as a staff car (under the designation Kfz.21). The G4 was produced as a four-door sedan with a folding roof. This car was too complex and expensive for mass production, so it was made in a relatively small quantity.
Some trucks were equipped with MG 34 machine guns. They served to transport high command staff of the Wehrmacht, as well as guards and escorts. Vehicles in this variant were called Partisanenwagen.
El automóvil de pasajeros G4 de tres ejes fue diseñado por Daimler-Benz en 1934 y se fabricó hasta 1939. Este pesado vehículo todoterreno de seis plazas con un motor de ocho cilindros con una potencia de 100 (luego 110) hp fue diseñado para altas -funcionarios de rango del Tercer Reich, así como para el ejército, donde se usó como automóvil del estado mayor (bajo la designación Kfz.21). El G4 se fabricó como un sedán de cuatro puertas con techo plegable. Este automóvil era demasiado complejo y costoso para la producción en masa, por lo que se fabricó en una cantidad relativamente pequeña.
Algunos camiones estaban equipados con ametralladoras MG 34. Sirvieron para transportar personal de alto mando de la Wehrmacht, así como guardias y escoltas. Los vehículos de esta variante se llamaron Partisanenwagen.
Escala
1:35
Periodo de tiempo
WW2
Tamaño del modelo (largo x alto)
158 x 54 mm
Tamaño de caja
295 x 225 x 40 mm
Numero de detalles
307 + 20
1/48 Boeing F/A-18F Super Hornet
MM LS-013
72,50€As the latest F / A-18 variants, the F / A-18E / F aircraft have greatly improved electronic equipment and extended combat radius. To perform the missions like air superiority and ground attack and complex tasks including reconnaissance and electronic warfare, the F / A-18F’s rear cockpit weapon systems operator has new advanced cockpit displays and control system. The pilot and the weapon systems operator can perform air-to-air and air-to-ground tasks at the same time. Before the next-generation carrier-based fighters enter service, the F / A-18F will still be the main combat aircraft of the U.S. aircraft carrier battle group.
MENG releases this brand-new LS-013 Boeing F/A-18E Super Hornet model kit licensed by The Boeing Company. The finished model will be 377.9mm long and 273.4mm wide. This kit includes pre-cut stainless steel PE parts and pre-cut painting masks.
LS-013 Boeing F/A-18F Super Hornet
Scale: 1/48
Release in: July 2021
Flaps and slats can be installed in retracted or deployed positions.
Horizontal stabilizers and rudders are movable.
The two-seat variant’s cockpit and cockpit interior equipment are precisely replicated.
The specially designed pluggable main pylons allow the easy change of weapons; this kit includes AGM-65 air-to-ground missiles and GBU-16 laser-guided bombs.
Two U.S. Navy pilot figures featuring realistic gestures and finely replicated suit and equipment are included. Two flight helmet options are provided.
This kit includes optional exterior parts.
Como las últimas variantes del F / A-18, los aviones F / A-18E / F tienen equipos electrónicos muy mejorados y un radio de combate extendido. Para realizar misiones como superioridad aérea y ataque terrestre y tareas complejas que incluyen reconocimiento y guerra electrónica, el operador de sistemas de armas de la cabina trasera del F / A-18F tiene nuevas pantallas de cabina y un sistema de control avanzados. El piloto y el operador de sistemas de armas pueden realizar tareas aire-aire y aire-tierra al mismo tiempo. Antes de que los cazas basados en portaaviones de próxima generación entren en servicio, el F / A-18F seguirá siendo el principal avión de combate del grupo de batalla de portaaviones de EE. UU.
MENG lanza este nuevo kit modelo LS-013 Boeing F / A-18E Super Hornet con licencia de The Boeing Company. El modelo terminado tendrá 377,9 mm de largo y 273,4 mm de ancho. Este kit incluye piezas de PE de acero inoxidable precortadas y máscaras de pintura precortadas.
LS-013 Boeing F / A-18F Super Hornet
Escala: 1/48
Lanzamiento: julio de 2021
Las aletas y las lamas se pueden instalar en posiciones retraídas o desplegadas.
Los timones y estabilizadores horizontales son móviles.
La cabina del piloto y el equipamiento interior de la cabina de la variante de dos asientos se reproducen con precisión.
Los pilones principales enchufables especialmente diseñados permiten el cambio fácil de armas; este kit incluye misiles aire-tierra AGM-65 y bombas guiadas por láser GBU-16.
Se incluyen dos figuras de piloto de la Marina de los EE. UU. Con gestos realistas y un traje y equipo finamente replicados. Se proporcionan dos opciones de casco de vuelo.
Este kit incluye piezas exteriores opcionales.
HUSKY MK. III VMMD W/Interrogation arm 1/35
AFV AF35354
72,50€■ Highly detailed forward mounted interrogation arm.
■ Decals for Husky MK III with interrogation arm configuration.
■ Brazo de interrogación montado en la parte delantera altamente detallado.
■ Calcomanías para Husky MK III con configuración de brazo de interrogación.
Cookie | Duration | Description |
---|---|---|
PHPSESSID | session | This cookie is native to PHP applications. The cookie is used to store and identify a users' unique session ID for the purpose of managing user session on the website. The cookie is a session cookies and is deleted when all the browser windows are closed. |
viewed_cookie_policy | 1 year | The cookie is set by the GDPR Cookie Consent plugin to store whether or not the user has consented to the use of cookies. It does not store any personal data. |
Cookie | Duration | Description |
---|---|---|
pelm_last_loaded_shop_type | 1 month | No description available. |
woocommerce_recently_viewed | session | Description unavailable. |
wp_woocommerce_session_9205d68996927145eedf8afcab99571e | 2 days | No description |
yith_wcwl_session_9205d68996927145eedf8afcab99571e | 1 month | No description |
Cookie | Duration | Description |
---|---|---|
_fbp | 3 months | This cookie is set by Facebook to display advertisements when either on Facebook or on a digital platform powered by Facebook advertising, after visiting the website. |
fr | 3 months | Facebook sets this cookie to show relevant advertisements to users by tracking user behaviour across the web, on sites that have Facebook pixel or Facebook social plugin. |
loc | 1 year 1 month | AddThis sets this geolocation cookie to help understand the location of users who share the information. |
VISITOR_INFO1_LIVE | 5 months 27 days | A cookie set by YouTube to measure bandwidth that determines whether the user gets the new or old player interface. |
YSC | session | YSC cookie is set by Youtube and is used to track the views of embedded videos on Youtube pages. |
yt-remote-connected-devices | never | YouTube sets this cookie to store the video preferences of the user using embedded YouTube video. |
yt-remote-device-id | never | YouTube sets this cookie to store the video preferences of the user using embedded YouTube video. |
yt.innertube::nextId | never | This cookie, set by YouTube, registers a unique ID to store data on what videos from YouTube the user has seen. |
yt.innertube::requests | never | This cookie, set by YouTube, registers a unique ID to store data on what videos from YouTube the user has seen. |
Cookie | Duration | Description |
---|---|---|
_ga | 2 years | The _ga cookie, installed by Google Analytics, calculates visitor, session and campaign data and also keeps track of site usage for the site's analytics report. The cookie stores information anonymously and assigns a randomly generated number to recognize unique visitors. |
_ga_BK3V7Y3VZB | 2 years | This cookie is installed by Google Analytics. |
_gat_gtag_UA_105576964_1 | 1 minute | Set by Google to distinguish users. |
_gid | 1 day | Installed by Google Analytics, _gid cookie stores information on how visitors use a website, while also creating an analytics report of the website's performance. Some of the data that are collected include the number of visitors, their source, and the pages they visit anonymously. |
at-rand | never | AddThis sets this cookie to track page visits, sources of traffic and share counts. |
CONSENT | 2 years | YouTube sets this cookie via embedded youtube-videos and registers anonymous statistical data. |
uvc | 1 year 1 month | Set by addthis.com to determine the usage of addthis.com service. |
Cookie | Duration | Description |
---|---|---|
pll_language | 1 year | The pll _language cookie is used by Polylang to remember the language selected by the user when returning to the website, and also to get the language information when not available in another way. |