Weight | 0.65 kg |
---|---|
Dimensions | 34 × 19 × 5 cm |
Army | Japanese |
Brands | |
Materials | Plastic |
Product | |
Pack | Single |
Scale | 1/48 |
Theme | Aircraft, Military |
AK Points
Availability: In stock
25,95€
Scale … 1:48
Part number ……… JT43
The Zero fighter is a fighter that was active as the main fighter of the Japanese Navy.
The maneuverability was outstanding, and the firepower, speed, etc. exceeded the level of warfare at that time, surpassing even land fighters.
It was on October 5, 1945 that the plan request for 12 test-ship fighter aircraft was issued to both Mitsubishi and Nakajima as the main carrier-capable fighter aircraft after 96 warships .
Mitsubishi started the design with Jiro Horikoshi as the chief engineer.
Based on the technology cultivated in the 96th battle, Mr. Horikoshi made a further design such as reduction of weight and resistance.
In addition, variable-pitch propellers, retractable legs, split structure, water drop type sealed windshield, streamlined drop tank, adoption of Crucie radio return direction measuring device, use of
ESD (super duralumin), equipment inside the wing of 20 mm machine gun, etc.
A new attempt was incorporated, and the 12th test ship battle (A6M1) Unit 1 was completed with the Ruisei 13 type (lifting output 780 horsepower).
The first flight was carried out in April 2014, and Unit 1 recorded a speed exceeding 491 km / h during in-house tests and achieved good results. After that, the propeller was changed from two wings to three wings, and the elevator control device After minor repairs such as deterioration of steel , it was handed over to the Navy in September and the examination was started.
Immediately after the start of the test, it was decided to call the additional prototype after Unit 3 with the Sakae 12 type (lifting output 940 horsepower) and the tail wing arrangement changed, and there was an aerial disassembly accident during the examination. was though, it has been found to be good feature airplane, A6M2 was officially adopted as the type-0 No. 1 fighter machine type 1.
(Renamed to A6M2a, Zero fighter type 11 in 1945) Compared to A6M1 , the A6M2 equipped with Sakae 12 type has a total length of 270 mm and a weight increase of 19 kg, but the maximum speed has improved to 533.4 km / h.
A total of 64 types of 11 were made and sent to the Chinese front before official adoption at the request of local troops.
Since Type 11 was used as a land fighter, it is not equipped as a warship.
In addition, since the 11-inch wing tip used as a land fighter did not have a folding mechanism, a mechanism to fold the wing tip by 50 cm has been added to the aircraft after Unit 67 to facilitate handling on the aircraft carrier.
In addition, it has been equipped with a Crucie radio return direction measuring device, landing hook, and other equipment for battle, and has been adopted as the Zero fighter type 1 carrier-capable fighter type 2 (later renamed the Zero fighter type 21 and A6M2b).
These zero battles were manipulated by skilled crew members and demonstrated strength that seemed invincible on various fronts.
“data”
Crew: 1 person
Overall width:
12.00m
Overall length: 9.060m Overall height: 3.570m
Maximum speed: 533.4km / h (4,300m)
Engine: “Sakae” 12 type ( separation output 940hp)
Escala … 1:48
Número de pieza ……… JT43
El caza Zero es un caza que estuvo activo como el caza principal de la Armada japonesa.
La maniobrabilidad fue sobresaliente, y la potencia de fuego, velocidad, etc. excedió el nivel de guerra en ese momento, superando incluso a los cazas terrestres.
Fue el 5 de octubre de 1945 que se emitió la solicitud de plan para 12 aviones de combate de barcos de prueba a Mitsubishi y Nakajima como el principal avión de combate con capacidad para portaaviones después de 96 buques de guerra.
Mitsubishi comenzó el diseño con Jiro Horikoshi como ingeniero jefe.
Basado en la tecnología cultivada en la batalla número 96, el Sr. Horikoshi hizo un diseño adicional como la reducción de peso y resistencia.
Además, hélices de paso variable, patas retráctiles, estructura dividida, parabrisas sellado tipo gota de agua, tanque de caída aerodinámico, adopción del dispositivo de medición de dirección de retorno de radio Crucie, uso de
ESD (superduraluminio), equipamiento dentro del ala de ametralladora de 20 mm, etc.
Se incorporó un nuevo intento y se completó la unidad 1 de la 12ª batalla de barcos de prueba (A6M1) con el tipo Ruisei 13 (potencia de elevación de 780 caballos de fuerza).
El primer vuelo se realizó en abril de 2014, y la Unidad 1 registró una velocidad superior a 491 km / h durante las pruebas internas y obtuvo buenos resultados. Posteriormente, se cambió la hélice de dos alas a tres alas, y el dispositivo de control del elevador. Luego de reparaciones menores como el deterioro del acero, se entregó a la Armada en septiembre y se inició el examen.
Inmediatamente después del inicio de la prueba, se decidió llamar al prototipo adicional después de la Unidad 3 con el tipo Sakae 12 (potencia de elevación 940 caballos de fuerza) y la disposición del ala trasera cambió, y hubo un accidente de desmontaje aéreo durante el examen. Sin embargo, se ha descubierto que es un buen avión de características, el A6M2 fue adoptado oficialmente como el tipo 1 de máquina de combate n. ° 1 tipo 1.
(Renombrado a A6M2a, Zero fighter type 11 en 1945) En comparación con A6M1, el A6M2 equipado con el tipo Sakae 12 tiene una longitud total de 270 mm y un aumento de peso de 19 kg, pero la velocidad máxima ha mejorado a 533,4 km / h.
Se fabricaron un total de 64 tipos de 11 y se enviaron al frente chino antes de la adopción oficial a pedido de las tropas locales.
Dado que el Tipo 11 se utilizó como caza terrestre, no está equipado como buque de guerra.
Además, dado que la punta del ala de 11 pulgadas utilizada como caza terrestre no tenía un mecanismo de plegado, se ha agregado un mecanismo para doblar la punta del ala en 50 cm a la aeronave después de la Unidad 67 para facilitar el manejo en el portaaviones.
Además, ha sido equipado con un dispositivo de medición de dirección de retorno por radio Crucie, gancho de aterrizaje y otros equipos para la batalla, y ha sido adoptado como el caza Zero Fighter tipo 1 con capacidad para portaaviones tipo 2 (más tarde rebautizado como Zero Fighter tipo 21 y A6M2b).
Estas cero batallas fueron manipuladas por hábiles miembros de la tripulación y demostraron una fuerza que parecía invencible en varios frentes.
“datos”
Tripulación: 1 persona
Ancho promedio:
12,00 m
Longitud total: 9.060 m Altura total: 3.570 m
Velocidad máxima: 533,4 km / h (4.300 m)
Motor: tipo “Sakae” 12 (salida de separación 940 CV)
Weight | 0.65 kg |
---|---|
Dimensions | 34 × 19 × 5 cm |
Army | Japanese |
Brands | |
Materials | Plastic |
Product | |
Pack | Single |
Scale | 1/48 |
Theme | Aircraft, Military |
FA 614
18,95€A set designed for thorough cleaning of any airbrush.
A glass jar with a plastic screw cap is used to purge the airbrush with the cleaner after each use. Thanks to a special filter in the upper part, all impurities and liquid remain in the container. Additionally, the lid is equipped with an airbrush stand.
Cleaners and rods are used to thoroughly clean various elements of airbrushes: tips, nozzles, bodies and other elements. The needle, on the other hand, cleans the inside of the airbrush nozzle or other internal parts of the airbrush, such as the needle guide channel.
Container Height: 85mm, diameter: 100mm.
Un conjunto diseñado para la limpieza a fondo de cualquier aerógrafo.
Se usa un frasco de vidrio con un tapón de rosca de plástico para purgar el aerógrafo con el limpiador después de cada uso. Gracias a un filtro especial en la parte superior, todas las impurezas y líquidos permanecen en el recipiente. Además, la tapa está equipada con un soporte para aerógrafo.
Los limpiadores y las varillas se utilizan para limpiar a fondo varios elementos de los aerógrafos: puntas, boquillas, cuerpos y otros elementos. La aguja, por otro lado, limpia el interior de la boquilla del aerógrafo u otras partes internas del aerógrafo, como el canal de guía de la aguja.
Altura del contenedor: 85 mm, diámetro: 100 mm.
SURVIVAL WEATHERING BRUSHES SET
AK663
12,20€An arsenal of brushes designed by the weathering experts here at AK. Top quality weathering products require the right tools to be applied; our Survival Weathering Brush set is the right set of tools you need. Contained in this set are the brushes needed to streak, chip, wash, and apply pigments plus much more.
Includes:
Un arsenal de pinceles diseñados por los expertos en weathering de AK. Los productos de weathering de alta calidad requieren una aplicación con las herramientas adecuadas; nuestro juego de pinceles de supervivencia es el conjunto de herramientas adecuado que necesitas. En este juego se encuentran los pinceles necesarios para hacer líneas, desconchar, hacer lavados, aplicar pigmentos y mucho más.
Incluye:
ABT114
6,50€For precision works is necessary to keep the tip of your brushes in a perfect state. This gel is indicated to keep the tip sharp and in perfect use condition with all brushes fibers compacted and never open or deformed. With this gel you will keep your brushes always like new ones after using and cleaning them (it can be used after the application of our ABT117 Magic Potion for Brushes or any other chemical or natural cleaner).
Para trabajos de precisión es necesario mantener la punta de sus pinceles en perfecto estado. Este gel está indicado para mantener la punta afilada y en perfecto estado de uso con todas las fibras de los pinceles compactadas y nunca abiertas o deformadas. Con este gel mantendrá sus pinceles siempre como nuevos después de usarlos y limpiarlos (se puede utilizar después de la aplicación de nuestra Poción Mágica para Pinceles ABT117 o cualquier otro limpiador químico o natural).
AK9009
9,90€Precision cutting pliers with an ergonomic handle covered with an orange non-slip vinyl foam, with a spring return.
They make a clean and precise cut. No need to touch up.
Suitable for parts or rods of plastic, PVC, resin or ABS less than 4mm.
Do not use to cut metal parts.
Alicates de corte de precisión con mango ergonómico cubierto con espuma de vinilo naranja, antideslizante y con muelle de retorno.
Realizan un corte limpio y preciso sin que sea necesario retocar.
Adecuado para piezas o varillas de plástico, PVC, resina o ABS menores de 4mm.
No utilizar para cortar piezas de metal.
AK183
5,25€The original one.
A high quality ultra matte varnish which can be applied with a brush or an airbrush to achieve a dead flat finish on any surface.
Acrylic Ultra Matte Varnish formulated for maximum airbrush performance. Water soluble, odorless, and non-toxic. Shake before each use. We recommend AK-712 Acrylic Thinner for thinning. Dries completely in 12 hours.
60 ml.
El Original.
Barniz ultra mate de alta calidad que puede ser aplicado con pincel o con aerógrafo para lograr un acabado mate en cualquier superficie.
Nuestro barniz ultra mate acrílico está formulado para el máximo rendimiento del aerógrafo. Soluble en agua, inodoro y no tóxico. Agitar antes de cada uso. Recomendamos AK-712 Acrylic Thinner para diluir. Se seca completamente en 12 horas.
60 ml.
MAGNET ULTRA RESISTANT CYANOCRYLATE GLUE
AK12015
7,60€20g.
General-purpose cyanoacrylate 401. Fast drying, extra strong, low viscosity, specially formulated for adhesion between materials that can even have an acidic surface. Can be used with rubber, leather, wood, metal, resin and plastic. The surfaces to be joined must be free of dirt, dust and grease. A small amount of adhesive should be applied; more cyanoacrylate does not guarantee a better bond and makes more difficult the drying of the adhesive that is effective for bonding.
– 99% Cyano.
– Ethyl cyanoacrylate
– Use temperature: -55º to 120º
– Set time: between 3 and 10 seconds. The gaps and uneven surfaces can increase this setting time. It is not necessary to use clamps. Holding the pieces firmly for 10-30 seconds will ensure better adhesion.
– Definitive cure time: 24 h
– Viscosity: 110 mPa.S
– Shear strength: 21.0 MPa
* Bottles are not filled at a 100% to leave some air and make it work properly.
20g.
Cianoacrilato de uso general 401, secado rápido, extra fuerte, baja viscosidad especialmente formulado para la adhesión entre materiales que incluso pueden tener una superficie ácida. Se puede usar con caucho, cuero, madera, metal, resina y plástico. Las superficies a unir deben estar libres de suciedad, polvo y grasa. Se debe aplicar una pequeña cantidad de adhesivo; más cianoacrilato no garantiza una mejor unión y hace más difícil el secado del adhesivo que es efectivo para la unión.
– 99% Cyano
– Cianoacrilato de etilo
– Temperatura de uso: -55º a 120º
– Tiempo de fraguado: entre 3 y 10 segundos. Los huecos y las superficies irregulares pueden aumentar este tiempo de fraguado. No es necesario usar abrazaderas. Sostener las piezas firmemente durante 10-30 segundos asegurará una mejor adhesión.
– Tiempo de curado definitivo: 24 h.
– Viscosidad: 110 mPa.S
– Resistencia al corte: 21.0 MPa
*Las botellas no se llenan al 100% para dejar algo de aire y que funcione correctamente.
AK11505
7,95€
AK8064
12,75€The Wet Palette is a tool mainly used by figure painters, but more and more it is being used by people that paint with acrylics any kind of model. It will extend the useful life of any acrylic so that it can be used for hours and once shut it will preserve the colors and color mixtures. It can be kept in the fridge.
It has three components:
1.Sponge, to hold large quantities of water, since it is quite thick.
2.Cloth made of fiber, placed on top of the sponge as a leveler, humidity filter, and as an interchangeable element in case of stains or if not used for a long time.
3.High quality special Paper, made of a fine silicone film, allows the transfer of humidity but prevents water forming and paints from dissolving, and does not give off any fibers not hairs when worked with the brushes.
The Wet Palette is watertight and airtight, made of the same material of marine containers for flares, charts, and medicines. Its locks guarantee the seal. This extends the life of paints, especially in Summer, hot climates, and under extreme conditions.
*Dimensions: 16 x 13 x 4 cm.
It contains:
?· Need more info? Click here
La paleta húmeda es una herramienta utilizada principalmente por los pintores de figuras, pero cada vez más es utilizada por las personas que pintan con acrílicos cualquier tipo de modelo. Prolonga la vida útil de cualquier acrílico para que pueda ser utilizado durante horas y, una vez cerrado, conserva los colores y las mezclas de colores. Se puede conservar en la nevera.
Tiene tres componentes:
1.Esponja, para retener grandes cantidades de agua, ya que es bastante gruesa.
2.Paño de fibra, colocado encima de la esponja como nivelador, filtro de humedad, y como elemento intercambiable en caso de manchas o si no se utiliza durante mucho tiempo.
3.Papel especial de alta calidad, hecho de una fina película de silicona, permite la transferencia de humedad pero evita que se forme agua y que se disuelvan las pinturas, y no desprende fibras ni pelos cuando se trabaja con los pinceles.
La paleta húmeda es estanca y hermética, fabricada con el mismo material de los contenedores marinos para bengalas, cartas de navegación y medicamentos. Sus cierres garantizan la estanqueidad. Esto prolonga la vida de las pinturas, especialmente en verano, en climas cálidos y en condiciones extremas.
*Dimensiones: 16 x 13 x 4 cm.
Contiene:
¿Necesita más información? Haga clic aquí
AK9204
6,50€ENGLISH
TOP LINE DELUXE Marta Kolinsky KIT
ABT850
78,75€FA 614
18,95€A set designed for thorough cleaning of any airbrush.
A glass jar with a plastic screw cap is used to purge the airbrush with the cleaner after each use. Thanks to a special filter in the upper part, all impurities and liquid remain in the container. Additionally, the lid is equipped with an airbrush stand.
Cleaners and rods are used to thoroughly clean various elements of airbrushes: tips, nozzles, bodies and other elements. The needle, on the other hand, cleans the inside of the airbrush nozzle or other internal parts of the airbrush, such as the needle guide channel.
Container Height: 85mm, diameter: 100mm.
Un conjunto diseñado para la limpieza a fondo de cualquier aerógrafo.
Se usa un frasco de vidrio con un tapón de rosca de plástico para purgar el aerógrafo con el limpiador después de cada uso. Gracias a un filtro especial en la parte superior, todas las impurezas y líquidos permanecen en el recipiente. Además, la tapa está equipada con un soporte para aerógrafo.
Los limpiadores y las varillas se utilizan para limpiar a fondo varios elementos de los aerógrafos: puntas, boquillas, cuerpos y otros elementos. La aguja, por otro lado, limpia el interior de la boquilla del aerógrafo u otras partes internas del aerógrafo, como el canal de guía de la aguja.
Altura del contenedor: 85 mm, diámetro: 100 mm.
SURVIVAL WEATHERING BRUSHES SET
AK663
12,20€An arsenal of brushes designed by the weathering experts here at AK. Top quality weathering products require the right tools to be applied; our Survival Weathering Brush set is the right set of tools you need. Contained in this set are the brushes needed to streak, chip, wash, and apply pigments plus much more.
Includes:
Un arsenal de pinceles diseñados por los expertos en weathering de AK. Los productos de weathering de alta calidad requieren una aplicación con las herramientas adecuadas; nuestro juego de pinceles de supervivencia es el conjunto de herramientas adecuado que necesitas. En este juego se encuentran los pinceles necesarios para hacer líneas, desconchar, hacer lavados, aplicar pigmentos y mucho más.
Incluye:
ABT114
6,50€For precision works is necessary to keep the tip of your brushes in a perfect state. This gel is indicated to keep the tip sharp and in perfect use condition with all brushes fibers compacted and never open or deformed. With this gel you will keep your brushes always like new ones after using and cleaning them (it can be used after the application of our ABT117 Magic Potion for Brushes or any other chemical or natural cleaner).
Para trabajos de precisión es necesario mantener la punta de sus pinceles en perfecto estado. Este gel está indicado para mantener la punta afilada y en perfecto estado de uso con todas las fibras de los pinceles compactadas y nunca abiertas o deformadas. Con este gel mantendrá sus pinceles siempre como nuevos después de usarlos y limpiarlos (se puede utilizar después de la aplicación de nuestra Poción Mágica para Pinceles ABT117 o cualquier otro limpiador químico o natural).
AK9009
9,90€Precision cutting pliers with an ergonomic handle covered with an orange non-slip vinyl foam, with a spring return.
They make a clean and precise cut. No need to touch up.
Suitable for parts or rods of plastic, PVC, resin or ABS less than 4mm.
Do not use to cut metal parts.
Alicates de corte de precisión con mango ergonómico cubierto con espuma de vinilo naranja, antideslizante y con muelle de retorno.
Realizan un corte limpio y preciso sin que sea necesario retocar.
Adecuado para piezas o varillas de plástico, PVC, resina o ABS menores de 4mm.
No utilizar para cortar piezas de metal.
AK183
5,25€The original one.
A high quality ultra matte varnish which can be applied with a brush or an airbrush to achieve a dead flat finish on any surface.
Acrylic Ultra Matte Varnish formulated for maximum airbrush performance. Water soluble, odorless, and non-toxic. Shake before each use. We recommend AK-712 Acrylic Thinner for thinning. Dries completely in 12 hours.
60 ml.
El Original.
Barniz ultra mate de alta calidad que puede ser aplicado con pincel o con aerógrafo para lograr un acabado mate en cualquier superficie.
Nuestro barniz ultra mate acrílico está formulado para el máximo rendimiento del aerógrafo. Soluble en agua, inodoro y no tóxico. Agitar antes de cada uso. Recomendamos AK-712 Acrylic Thinner para diluir. Se seca completamente en 12 horas.
60 ml.
MAGNET ULTRA RESISTANT CYANOCRYLATE GLUE
AK12015
7,60€20g.
General-purpose cyanoacrylate 401. Fast drying, extra strong, low viscosity, specially formulated for adhesion between materials that can even have an acidic surface. Can be used with rubber, leather, wood, metal, resin and plastic. The surfaces to be joined must be free of dirt, dust and grease. A small amount of adhesive should be applied; more cyanoacrylate does not guarantee a better bond and makes more difficult the drying of the adhesive that is effective for bonding.
– 99% Cyano.
– Ethyl cyanoacrylate
– Use temperature: -55º to 120º
– Set time: between 3 and 10 seconds. The gaps and uneven surfaces can increase this setting time. It is not necessary to use clamps. Holding the pieces firmly for 10-30 seconds will ensure better adhesion.
– Definitive cure time: 24 h
– Viscosity: 110 mPa.S
– Shear strength: 21.0 MPa
* Bottles are not filled at a 100% to leave some air and make it work properly.
20g.
Cianoacrilato de uso general 401, secado rápido, extra fuerte, baja viscosidad especialmente formulado para la adhesión entre materiales que incluso pueden tener una superficie ácida. Se puede usar con caucho, cuero, madera, metal, resina y plástico. Las superficies a unir deben estar libres de suciedad, polvo y grasa. Se debe aplicar una pequeña cantidad de adhesivo; más cianoacrilato no garantiza una mejor unión y hace más difícil el secado del adhesivo que es efectivo para la unión.
– 99% Cyano
– Cianoacrilato de etilo
– Temperatura de uso: -55º a 120º
– Tiempo de fraguado: entre 3 y 10 segundos. Los huecos y las superficies irregulares pueden aumentar este tiempo de fraguado. No es necesario usar abrazaderas. Sostener las piezas firmemente durante 10-30 segundos asegurará una mejor adhesión.
– Tiempo de curado definitivo: 24 h.
– Viscosidad: 110 mPa.S
– Resistencia al corte: 21.0 MPa
*Las botellas no se llenan al 100% para dejar algo de aire y que funcione correctamente.
1/35 MIDDLE EASTERNERS IN THE STREET
MM HS-001
12,50€Buy 1/35 MIDDLE EASTERNERS IN THE STREET online for just 9,95€. AK Interactive acrylic paints, brushes for modelling, pigments, oils and filters for scale modeling.
Cookie | Duration | Description |
---|---|---|
PHPSESSID | session | This cookie is native to PHP applications. The cookie is used to store and identify a users' unique session ID for the purpose of managing user session on the website. The cookie is a session cookies and is deleted when all the browser windows are closed. |
viewed_cookie_policy | 1 year | The cookie is set by the GDPR Cookie Consent plugin to store whether or not the user has consented to the use of cookies. It does not store any personal data. |
Cookie | Duration | Description |
---|---|---|
pelm_last_loaded_shop_type | 1 month | No description available. |
woocommerce_recently_viewed | session | Description unavailable. |
wp_woocommerce_session_9205d68996927145eedf8afcab99571e | 2 days | No description |
yith_wcwl_session_9205d68996927145eedf8afcab99571e | 1 month | No description |
Cookie | Duration | Description |
---|---|---|
_fbp | 3 months | This cookie is set by Facebook to display advertisements when either on Facebook or on a digital platform powered by Facebook advertising, after visiting the website. |
fr | 3 months | Facebook sets this cookie to show relevant advertisements to users by tracking user behaviour across the web, on sites that have Facebook pixel or Facebook social plugin. |
loc | 1 year 1 month | AddThis sets this geolocation cookie to help understand the location of users who share the information. |
VISITOR_INFO1_LIVE | 5 months 27 days | A cookie set by YouTube to measure bandwidth that determines whether the user gets the new or old player interface. |
YSC | session | YSC cookie is set by Youtube and is used to track the views of embedded videos on Youtube pages. |
yt-remote-connected-devices | never | YouTube sets this cookie to store the video preferences of the user using embedded YouTube video. |
yt-remote-device-id | never | YouTube sets this cookie to store the video preferences of the user using embedded YouTube video. |
yt.innertube::nextId | never | This cookie, set by YouTube, registers a unique ID to store data on what videos from YouTube the user has seen. |
yt.innertube::requests | never | This cookie, set by YouTube, registers a unique ID to store data on what videos from YouTube the user has seen. |
Cookie | Duration | Description |
---|---|---|
_ga | 2 years | The _ga cookie, installed by Google Analytics, calculates visitor, session and campaign data and also keeps track of site usage for the site's analytics report. The cookie stores information anonymously and assigns a randomly generated number to recognize unique visitors. |
_ga_BK3V7Y3VZB | 2 years | This cookie is installed by Google Analytics. |
_gat_gtag_UA_105576964_1 | 1 minute | Set by Google to distinguish users. |
_gid | 1 day | Installed by Google Analytics, _gid cookie stores information on how visitors use a website, while also creating an analytics report of the website's performance. Some of the data that are collected include the number of visitors, their source, and the pages they visit anonymously. |
at-rand | never | AddThis sets this cookie to track page visits, sources of traffic and share counts. |
CONSENT | 2 years | YouTube sets this cookie via embedded youtube-videos and registers anonymous statistical data. |
uvc | 1 year 1 month | Set by addthis.com to determine the usage of addthis.com service. |
Cookie | Duration | Description |
---|---|---|
pll_language | 1 year | The pll _language cookie is used by Polylang to remember the language selected by the user when returning to the website, and also to get the language information when not available in another way. |