FLESH BASE SPRAY

The decoration of models will become simple with this spray in sand yellow tone, perfect for WWII and modern vehicles in desert sand. These cans of spray paint are extremely useful for painting large or small surfaces. The paint is a synthetic lacquer that cures in a short period of time.

AK spray paints are not affected by acrylic, enamel paints or extreme weathering. Ultra resistant and with the best adherence. Before using you will need to shake the spray well, at least a minute to get a good mixture.

Special varnish to protect your models and figures if is needed a constant manipulation. Developed for Wargamers. Ultra resistant and with the best adherence. The paint is a synthetic varnish that cures in a short period of time. Easy to apply, the protection will become simple and more effective. Before using you will need to shake the spray well, at least a minute to get a good mixture. Paint with the can in vertical position in fast and thin coats at a distance of about 25 cm., allowing to dry for 5 minutes between layers. At the end of the painting turn the can upside down holding the spray nozzle for a few seconds in this position, until no more paint comes out of the diffuser, thus avoiding the obstruction of the diffuser.

150 ml.

The decoration of models will become simple with this spray in Aluminum tone, perfect for planes, spaceships or any other task. These cans of spray paint are extremely useful for painting large or small surfaces. The paint is a synthetic lacquer that cures in a short period of time.

AK spray paints are not affected by acrylic, enamel paints or extreme weathering. Ultra resistant and with the best adherence. Before using you will need to shake the spray well, at least a minute to get a good mixture.

Special base for rust. This product offer you a high opacity base to start rust effects. AK spray paints are not affected by acrylic, enamel paints or extreme weathering. Ultra resistant and with the best adher- ence. These cans of spray paint are extremely useful for painting large or small surfaces and fast works. Be- fore using you will need to shake the spray well, at least a minute to get a good mixture.

Product in spray with a grey tone special for priming resin parts featuring a high opacity once dry. This spray primer can be applied directly on resin, is ul- tra-resistant and with the best adherence.

Clean and degrease the resin parts to be painted. The paint is a synthetic lacquer that cures in a short period of time. Easy to apply, the primer of resin parts will be- come simple and more effective.

Before using you will need to shake the spray well, at least a minute to get a good mixture. Paint with the can in vertical position in fast and thin coats at a distance of about 25 cm., allowing to dry for 5 minutes between layers. At the end of the painting turn the can upside down holding the spray nozzle for a few seconds in this position, until no more paint comes out of the dif- fuser, thus avoiding the obstruction of the diffuser.

The decoration of models will become simple with this spray in Panzergrey tone, perfect for WWII German ve- hicles.
These cans of spray paint are extremely useful for painting large or small surfaces. The paint is a synthet- ic lacquer that cures in a short period of time.

AK spray paints are not affected by acrylic, enamel paints or extreme weathering. Ultra resistant and with the best adherence. Before using you will need to shake the spray well, at least a minute to get a good mixture

The decoration of models will become simple with this spray in Olive Drab tone, perfect for WWII and modern US Vehicles and allies. These cans of spray paint are extremely useful for painting large or small surfaces. The paint is a synthet- ic lacquer that cures in a short period of time.

AK spray paints are not affected by acrylic, enamel paints or extreme weathering. Ultra resistant and with the best adherence. Before using you will need to shake the spray well, at least a minute to get a good mixture.

High Quality Varnish to get an amazing Gloss varnish with a non-yellowing stability. Ultra resistant and with the best adherence. Before using you will need to shake the spray well, at least a minute to get a good mixture. Paint with the can in vertical position in fast and thin coats at a distance of about 25 cm., allowing to dry for 5 minutes be- tween layers. At the end of the painting turn the can upside down holding the spray nozzle for a few seconds in this position, until no more paint comes out of the diffuser, thus avoiding the obstruction of the diffuser.

This self-leveling coating is useful for lling bumps, dents, scratches, for removing bubbles, texturing… It is suitable for large-scale repairs and can be used as soluble putty. Before using Micro ller primer you will need to shake the spray well, at least a minute to get a good mixture. Once dry, it perfectly covers all the small imperfections, scratches, moulding marks, sanding abrasions and all minor defects. Then, after a smooth sanding, you’ll have a perfect surface for successfully applying the paint that suits you best.

Easy to apply, the primer of plastic models will become simple and more effective. This primer has excellent coverage and is recommended for use prior to painting. Works on plastic or metal. These cans of spray paint are extremely useful for painting large or small surfaces. The paint is a synthetic lacquer that cures in a short period of time.

AK spray paints are not affected by acrylic, enamel paints or extreme weathering. Ultra resistant and with the best adherence. Before using you will need to shake the spray well, at least a minute to get a good mixture.