| Weight | 5 kg |
|---|---|
| Dimensions | 10 × 10 × 10 cm |
| Brands | |
| Materials | Resin |
| Product | |
| Pack | Single |
| Scale | 1/35 |
| Theme | Military, Naval |
AK Points
BRONEKATER BK 1125
Availability: In stock
450,00€
This is a 1/35 scale armoured Soviet Motorboat BK1125 cast resin model kit. Its resin casting is top quality, with the large hull and deck sections being perfectly without any warping and the smaller parts free of any air holes or other blemishes. The most part of the pieces has been improved respect the previous in this deluxe limited edition. As the kit is a very limited edition with 1 figure bonus and a deluxe wooden box it could well become a collector’s item.
*Recommended for ages 14 and over
HISTORY: The BK boats were used between 1939 and 1945 on all European fronts from Austria to Stalingrad and in all rivers and were armed with different combinations of turrets and KATUSKA rockets for bombardment with the model depicting a boat with three 12.7mm machine gun turrets from the T-28 or T-35 tank and a 76.2mm T-34 Model 1941 main turret.
The BK boat had a 10 man Naval infantry crew and were transported by train to move the units from a river to river and was specially designed to cross tunnels and bridges on board train wagons. The Soviets used these ships in frontal attacks against other land tanks or enemy infantry with those armed with KATUSKA rockets for bombardment against fortifications or cities (Vienna in Austria was bombed with these ships).
The BK boats can be painted in 4 different camouflage schemes:
- Light Grey
- White, Grey and light grey
- Green
- Green and Brown, like the T-34 tanks.
? – Watch the ad video clicking here
Custom Tab Content here.
Tail sed sausage magna quis commodo swine. Aliquip strip steak esse ex in ham hock fugiat in. Labore velit pork belly eiusmod ut shank doner capicola consectetur landjaeger fugiat excepteur short loin. Pork belly laboris mollit in leberkas qui. Pariatur swine aliqua pork chop venison veniam. Venison sed cow short loin bresaola shoulder cupidatat capicola drumstick dolore magna shankle.
Tail sed sausage magna quis commodo swine. Aliquip strip steak esse ex in ham hock fugiat in. Labore velit pork belly eiusmod ut shank doner capicola consectetur landjaeger fugiat excepteur short loin. Pork belly laboris mollit in leberkas qui. Pariatur swine aliqua pork chop venison veniam. Venison sed cow short loin bresaola shoulder cupidatat capicola drumstick dolore magna shankle.
Related Products to BRONEKATER BK 1125
P299
5,75€This effect is special to imitate the accumulation of dust in vehicles
EFFECTS:
Apply the product by using a medium sized round soft paintbrush. Deposit onto your scale model around details, seams and in holes creating acumulated dust effects. Let the product dry for about 15 minutes then clean the excess using a brush dampened with Thinner for Washes. Use a fine pointy 00 size brush to apply more refined pin-washes where you feel they might be necessary such as in weld seams, wheels oraround bolts and rivets
Wash for Desert sand BASE (75ml)
P284
5,75€For all WWII and modern vehicles & aircrafts painted in sand yellow and desert camos
WASH TECHNIQUE:
Apply the wash using a medium sized round soft paintbrush. Deposit the wash onto your scale model around details, seams and in holes creating fake shadows hi-lighting details. Let the wash dry for about 15 minutes then clean the excess using a brush dampened with Thinner for Washes. Use a fine pointy 00 size brush to apply more refined pin-washes where you feel they might be necessary such as in weld seams and around bolts and rivets.
P700
5,75€Light amber colored stain for create spilled fuel effects
EFFECTS MODE OF USE:
Apply using a medium or fine sized round soft paintbrush. Apply the product with the brush in different lays of different intensities for the most realistic effects. Let the effect dry for about 15 minutes then clean the excess using a brush dampened with Thinner for Washes. Can be used alone or in combination with other effects to create a range of spilled fuel effects. Create fuel stains with this enamel effect for the most realistic vehicles.
F240
3,25€Use on grey colors and metallic finishes.
With this filter you will be able to work in dark grey tones giving a subtle blue tone to make the base much more rich in shades and more attractive.
*New formulated special purpose filter featuring fine suspended pigments for a perfect transparent effect.
FILTER TECHNIQUES: Apply the filter using a soft medium sized round paintbrush.Deposit the filter onto your scale model in areas where you want to alter the base tone. Let the filter dry for about 15 minutes. With this technique you will be able to fade, unify, and enrich the colors. You will also be able to tint the contrast between colors and get perfect transitions. Use each filter in the appropiate tone to get maximum efficient.
P221
5,75€For Vehicles & Aircrafts painted in Navy Blue, light Blue, light Green and light color camouflages.
WASH TECHNIQUE:
Apply the wash using a medium sized round soft paintbrush. Deposit the wash onto your scale model around details, seams and in holes creating fake shadows hi-lighting details. Let the wash dry for about 15 minutes then clean the excess using a brush dampened with Thinner for Washes. Use a fine pointy 00 size brush to apply more refined pin-washes where you feel they might be necessary such as in weld seams and around bolts and rivets
RUSSIAN SUBMARINE – PROJECT 613 1/35
MP35-417
300,00€
ENGLISH
ESPAÑOL
Limited edition in serographed wooden box of the central section of a Soviet Whiskey Class submarine.
They entered service with the Soviet navy between 1951 and 1958. Modified in a large number of variants (including a civilian one) and used to perform multiple tests for the development of new weapon systems, it remained in service until 1993.
This highly detailed resin kit depicts the sail and a portion of the center section of a Soviet Whiskeyclass submarine.
Dimension: 45 cm long x 11 cm wide x 20 cm high (Box dimensions 52x30x10.5) Specially to make it in its years of decay, which can be modeled as a wreck left in a scrapyard.
It can also be made operative. This class of submarines presents differences from one to another but different variants can be made with small basic modifications.
Several photos of these can be found, providing you with great inspiration as to how to turn this kit into an eyecatching replica.
This is a limited release, so don’t miss this chance and order it today!
Edición limitada en caja de madera serigrafiada de la sección central de un submarino soviético de
la clase Whiskey. Entraron en servicio en la armada soviética entre 1951 y 1958. Modificados
en un gran número de variantes (incluida una civil) y utilizados para realizar múltiples pruebas para el desarrollo de nuevos sistemas de armas, permanecieron en servicio hasta 1993.
Este kit de resina altamente detallado reproduce el puente de mando y una parte de la sección central de un submarino soviético de clase Whiskey.
Dimensiones: 45 cm de largo x 11 cm de ancho x 20 cm de alto (caja 52 x 30 x 10,5)
Especialmente para hacerla en sus años de decadencia, que puede ser ambientada como un submarino abandonado en un desguace. También se puede hacer operativo.
Esta clase de submarinos tienen diferencias de una a otra variante que se pueden representar con pequeñas modificaciones básicas. Es fácil encontrar fotos que proporcionarán una gran inspiración para convertir este kit en una réplica llamativa.
Esta es una versión limitada, así que no pierda esta oportunidad y pídala hoy mismo!
9,00€
The ninth issue of Aces High magazine deals with a very special subject that had never received such extensive coverage before: modelling the military helicopters. Our contributors had again prepared a number of interesting articles, revealing dozens of tips and tricks that will help you to deal with various problems that you may possibly encounter during various stages of your own builds.
Content :
-History of military helicopter I. From beginnings to Vietnam war.
-OH-58D Kiowa Warrior. Army combat explorer.
-AH 64A Apache The indian of the US Army.
-Sikorski MH-53J Pave Low III . The venerable Jolly Green gigant.
-UH-1H Huey . Warhorse in Vietnam
-AH-1Z Viper. The Zulu Cobra.
-H-34 US Marines. The rescue moster.
GET YOUR DIGITAL COPY AT AK-INTERACTIVE APP for iOS and Android
ABT165
3,90€Use this colour to make effects on whites, to combine with other gray tones on figures or vehicles on their illuminated areas, in winter scenarios or to work Panzer gray vehicles. It is also very helpful for illuminating war ships and modern military aircrafts in a realistic way.
P412
5,75€To create realistic rust effects over all types of scale models
EFFECTS:
Apply the effects using a medium sized round soft paintbrush. Deposit the wash onto your scale model around details, seams and in holes creating fake shadows hi-lighting details. Let dry for about 15 minutes then clean the excess using a brush dampened with Thinner for Washes. Use a fine pointy 00 size brush to apply more refined pin-washes where you feel they might be necessary such as in weld seams and around bolts and rivets. The efect can be used in vertical lines to create streaking effects.
P222
5,75€For Vehicles & Aircrafts painted in White, light Sand, Red Primer and for SCIFI Vehicles.
WASH TECHNIQUE:
Apply the wash using a medium sized round soft paintbrush. Deposit the wash onto your scale model around details, seams and in holes creating fake shadows hi-lighting details. Let the wash dry for about 15 minutes then clean the excess using a brush dampened with Thinner for Washes. Use a fine pointy 00 size brush to apply more refined pin-washes where you feel they might be necessary such as in weld seams and around bolts and rivets
P701
5,75€Product to create the grimy appearance and accumulated dirt of well used engines
EFFECTS:
Apply the effect using a medium sized round soft paintbrush. Work with the product onto your scale model in desired areas like engines or mechanisms creating the grimy and accumulated dirt of well used engines appearance. Let dry for about 15 minutes then clean the excess if is needed by using a brush dampened with Thinner for Washes.
P299
5,75€This effect is special to imitate the accumulation of dust in vehicles
EFFECTS:
Apply the product by using a medium sized round soft paintbrush. Deposit onto your scale model around details, seams and in holes creating acumulated dust effects. Let the product dry for about 15 minutes then clean the excess using a brush dampened with Thinner for Washes. Use a fine pointy 00 size brush to apply more refined pin-washes where you feel they might be necessary such as in weld seams, wheels oraround bolts and rivets
Wash for Desert sand BASE (75ml)
P284
5,75€For all WWII and modern vehicles & aircrafts painted in sand yellow and desert camos
WASH TECHNIQUE:
Apply the wash using a medium sized round soft paintbrush. Deposit the wash onto your scale model around details, seams and in holes creating fake shadows hi-lighting details. Let the wash dry for about 15 minutes then clean the excess using a brush dampened with Thinner for Washes. Use a fine pointy 00 size brush to apply more refined pin-washes where you feel they might be necessary such as in weld seams and around bolts and rivets.
P700
5,75€Light amber colored stain for create spilled fuel effects
EFFECTS MODE OF USE:
Apply using a medium or fine sized round soft paintbrush. Apply the product with the brush in different lays of different intensities for the most realistic effects. Let the effect dry for about 15 minutes then clean the excess using a brush dampened with Thinner for Washes. Can be used alone or in combination with other effects to create a range of spilled fuel effects. Create fuel stains with this enamel effect for the most realistic vehicles.
F240
3,25€Use on grey colors and metallic finishes.
With this filter you will be able to work in dark grey tones giving a subtle blue tone to make the base much more rich in shades and more attractive.
*New formulated special purpose filter featuring fine suspended pigments for a perfect transparent effect.
FILTER TECHNIQUES: Apply the filter using a soft medium sized round paintbrush.Deposit the filter onto your scale model in areas where you want to alter the base tone. Let the filter dry for about 15 minutes. With this technique you will be able to fade, unify, and enrich the colors. You will also be able to tint the contrast between colors and get perfect transitions. Use each filter in the appropiate tone to get maximum efficient.
P221
5,75€For Vehicles & Aircrafts painted in Navy Blue, light Blue, light Green and light color camouflages.
WASH TECHNIQUE:
Apply the wash using a medium sized round soft paintbrush. Deposit the wash onto your scale model around details, seams and in holes creating fake shadows hi-lighting details. Let the wash dry for about 15 minutes then clean the excess using a brush dampened with Thinner for Washes. Use a fine pointy 00 size brush to apply more refined pin-washes where you feel they might be necessary such as in weld seams and around bolts and rivets
RUSSIAN SUBMARINE – PROJECT 613 1/35
MP35-417
300,00€
ENGLISH
ESPAÑOL
Limited edition in serographed wooden box of the central section of a Soviet Whiskey Class submarine.
They entered service with the Soviet navy between 1951 and 1958. Modified in a large number of variants (including a civilian one) and used to perform multiple tests for the development of new weapon systems, it remained in service until 1993.
This highly detailed resin kit depicts the sail and a portion of the center section of a Soviet Whiskeyclass submarine.
Dimension: 45 cm long x 11 cm wide x 20 cm high (Box dimensions 52x30x10.5) Specially to make it in its years of decay, which can be modeled as a wreck left in a scrapyard.
It can also be made operative. This class of submarines presents differences from one to another but different variants can be made with small basic modifications.
Several photos of these can be found, providing you with great inspiration as to how to turn this kit into an eyecatching replica.
This is a limited release, so don’t miss this chance and order it today!
Edición limitada en caja de madera serigrafiada de la sección central de un submarino soviético de
la clase Whiskey. Entraron en servicio en la armada soviética entre 1951 y 1958. Modificados
en un gran número de variantes (incluida una civil) y utilizados para realizar múltiples pruebas para el desarrollo de nuevos sistemas de armas, permanecieron en servicio hasta 1993.
Este kit de resina altamente detallado reproduce el puente de mando y una parte de la sección central de un submarino soviético de clase Whiskey.
Dimensiones: 45 cm de largo x 11 cm de ancho x 20 cm de alto (caja 52 x 30 x 10,5)
Especialmente para hacerla en sus años de decadencia, que puede ser ambientada como un submarino abandonado en un desguace. También se puede hacer operativo.
Esta clase de submarinos tienen diferencias de una a otra variante que se pueden representar con pequeñas modificaciones básicas. Es fácil encontrar fotos que proporcionarán una gran inspiración para convertir este kit en una réplica llamativa.
Esta es una versión limitada, así que no pierda esta oportunidad y pídala hoy mismo!
9,00€
The ninth issue of Aces High magazine deals with a very special subject that had never received such extensive coverage before: modelling the military helicopters. Our contributors had again prepared a number of interesting articles, revealing dozens of tips and tricks that will help you to deal with various problems that you may possibly encounter during various stages of your own builds.
Content :
-History of military helicopter I. From beginnings to Vietnam war.
-OH-58D Kiowa Warrior. Army combat explorer.
-AH 64A Apache The indian of the US Army.
-Sikorski MH-53J Pave Low III . The venerable Jolly Green gigant.
-UH-1H Huey . Warhorse in Vietnam
-AH-1Z Viper. The Zulu Cobra.
-H-34 US Marines. The rescue moster.
GET YOUR DIGITAL COPY AT AK-INTERACTIVE APP for iOS and Android
ABT165
3,90€Use this colour to make effects on whites, to combine with other gray tones on figures or vehicles on their illuminated areas, in winter scenarios or to work Panzer gray vehicles. It is also very helpful for illuminating war ships and modern military aircrafts in a realistic way.
P412
5,75€To create realistic rust effects over all types of scale models
EFFECTS:
Apply the effects using a medium sized round soft paintbrush. Deposit the wash onto your scale model around details, seams and in holes creating fake shadows hi-lighting details. Let dry for about 15 minutes then clean the excess using a brush dampened with Thinner for Washes. Use a fine pointy 00 size brush to apply more refined pin-washes where you feel they might be necessary such as in weld seams and around bolts and rivets. The efect can be used in vertical lines to create streaking effects.
P222
5,75€For Vehicles & Aircrafts painted in White, light Sand, Red Primer and for SCIFI Vehicles.
WASH TECHNIQUE:
Apply the wash using a medium sized round soft paintbrush. Deposit the wash onto your scale model around details, seams and in holes creating fake shadows hi-lighting details. Let the wash dry for about 15 minutes then clean the excess using a brush dampened with Thinner for Washes. Use a fine pointy 00 size brush to apply more refined pin-washes where you feel they might be necessary such as in weld seams and around bolts and rivets
P701
5,75€Product to create the grimy appearance and accumulated dirt of well used engines
EFFECTS:
Apply the effect using a medium sized round soft paintbrush. Work with the product onto your scale model in desired areas like engines or mechanisms creating the grimy and accumulated dirt of well used engines appearance. Let dry for about 15 minutes then clean the excess if is needed by using a brush dampened with Thinner for Washes.