Weight | 0.98 kg |
---|---|
Dimensions | 35 × 20 × 7 cm |
Army | USA |
Brands | |
Materials | Plastic |
Product | |
Pack | Single |
Scale | 1/48 |
Theme | Aircraft, Military |
Availability: In stock
40,95€
About the Thunderbolt “Bubbletop”
In May 1941, as the war raged in Europe, a single-engine fighter of more than 4 tons made its first flight. This fighter was the XP-47B, prototype of the Republic P-47 Thunderbolt of which a total of 15,683 units would be built. Thanks to war experience, this aircraft was equipped with a 2,000hp radial R-2800 engine, a supercharger and eight 12.7mm machine guns. The XP-47B was to reach 633km/h and in January 1942, just after the United States went to war, the production of P-47B began. It was followed by the P-47C that incorporated various improvements and, from April 1943, by the P-47D, the most built version. The P-47D was equipped with an R-2800-59 engine, which can develop up to 2,300hp with combat emergency water injection system engaged. The ducts that were passing on the sides and below the cockpit to connect the supercharger placed behind the pilot’s seat gave to this plane its massive aspect. Many sub-types of the P-47D, designated D-1 to D-40, were produced but the first versions were called “Razorback” because of their sharp edge dorsal fin. The D-25 sub-type, which was introduced around June 1944, was fitted with an electrically actuated bubble canopy in order to improve pilot visibility and increased capacity fuel tanks. This decision resulted in a completely remodeled plane shape. All subsequent sub-types were also fitted with the bubble canopy and became a characteristic feature of late production Thunderbolts. The P-47 “Bubbletop” proved to be an excellent, well-balanced fighter-bomber.
About the Model
★Republic P-47D Thunderbolt “Bubbletop” plastic assembly kit.
★1/48 scale. Fuselage length: 230mm, wingspan: 259mm.
★This is the representation of P-47D late production that was nicknamed “Bubbletop”.
★The massive form of the plane, especially its belly and its cowling, has been accurately reproduced.
★Flaps come as separate parts and can be attached in the up or down position.
★Parts for replication of 3 types of mirrors, gun sights and 4 types of propellers are provided.
★Engine cowling flaps and the intercooler air outlets on each side of the fuselage can be represented in the opened or closed position.
★Parts for replication of 500-pound bombs, rocket launchers and three types of drop tank are part of the kit. A pilot figure and decals for two different markings are included.
Sobre el Thunderbolt “Bubbletop”
En mayo de 1941, cuando la guerra estalló en Europa, un caza monomotor de más de 4 toneladas realizó su primer vuelo. Este caza era el XP-47B, prototipo del Republic P-47 Thunderbolt, del cual se construirían un total de 15,683 unidades. Gracias a la experiencia de guerra, este avión estaba equipado con un motor radial R-2800 de 2,000 hp, un supercargador y ocho ametralladoras de 12.7 mm. El XP-47B alcanzaría los 633 km / hy en enero de 1942, justo después de que Estados Unidos entró en guerra, comenzó la producción del P-47B. Fue seguido por el P-47C que incorporó varias mejoras y, desde abril de 1943, por el P-47D, la versión más construida. El P-47D estaba equipado con un motor R-2800-59, que puede desarrollar hasta 2,300 hp con el sistema de inyección de agua de emergencia de combate activado. Los conductos que pasaban a los lados y debajo de la cabina para conectar el sobrealimentador colocado detrás del asiento del piloto le dieron a este avión su aspecto masivo. Se produjeron muchos subtipos del P-47D, designados D-1 a D-40, pero las primeras versiones se llamaron “Razorback” debido a su aleta dorsal de borde afilado. El subtipo D-25, que se introdujo alrededor de junio de 1944, estaba equipado con un dosel de burbujas accionado eléctricamente para mejorar la visibilidad del piloto y los depósitos de combustible de mayor capacidad. Esta decisión resultó en una forma plana completamente remodelada. Todos los subtipos posteriores también fueron equipados con el dosel de burbujas y se convirtieron en un rasgo característico de los Thunderbolts de producción tardía. El P-47 “Bubbletop” demostró ser un excelente cazabombardero bien equilibrado.
Sobre el modelo
★ Kit de montaje de plástico “Bubbletop” Republic P-47D Thunderbolt.
★ escala 1/48. Longitud del fuselaje: 230 mm, envergadura: 259 mm.
★ Esta es la representación de la producción tardía P-47D que fue apodada “Bubbletop”.
★ La forma masiva del avión, especialmente su barriga y su carenado, se ha reproducido con precisión.
★ Las aletas vienen como partes separadas y se pueden unir hacia arriba o hacia abajo.
★ Se proporcionan piezas para la replicación de 3 tipos de espejos, miras de pistola y 4 tipos de hélices.
★ Las aletas de capota del motor y las salidas de aire del intercooler a cada lado del fuselaje se pueden representar en la posición abierta o cerrada.
★ Las piezas para la replicación de bombas de 500 libras, lanzacohetes y tres tipos de tanque de caída son parte del kit. Se incluye una figura piloto y calcomanías para dos marcas diferentes.
Weight | 0.98 kg |
---|---|
Dimensions | 35 × 20 × 7 cm |
Army | USA |
Brands | |
Materials | Plastic |
Product | |
Pack | Single |
Scale | 1/48 |
Theme | Aircraft, Military |
ABT114
6,75€For precision works is necessary to keep the tip of your brushes in a perfect state. This gel is indicated to keep the tip sharp and in perfect use condition with all brushes fibers compacted and never open or deformed. With this gel you will keep your brushes always like new ones after using and cleaning them (it can be used after the application of our ABT117 Magic Potion for Brushes or any other chemical or natural cleaner).
Para trabajos de precisión es necesario mantener la punta de sus pinceles en perfecto estado. Este gel está indicado para mantener la punta afilada y en perfecto estado de uso con todas las fibras de los pinceles compactadas y nunca abiertas o deformadas. Con este gel mantendrá sus pinceles siempre como nuevos después de usarlos y limpiarlos (se puede utilizar después de la aplicación de nuestra Poción Mágica para Pinceles ABT117 o cualquier otro limpiador químico o natural).
AK9009
10,95€Precision cutting pliers with an ergonomic handle covered with an orange non-slip vinyl foam, with a spring return.
They make a clean and precise cut. No need to touch up.
Suitable for parts or rods of plastic, PVC, resin or ABS less than 4mm.
Do not use to cut metal parts.
Alicates de corte de precisión con mango ergonómico cubierto con espuma de vinilo naranja, antideslizante y con muelle de retorno.
Realizan un corte limpio y preciso sin que sea necesario retocar.
Adecuado para piezas o varillas de plástico, PVC, resina o ABS menores de 4mm.
No utilizar para cortar piezas de metal.
FA 614
19,50€A set designed for thorough cleaning of any airbrush.
A glass jar with a plastic screw cap is used to purge the airbrush with the cleaner after each use. Thanks to a special filter in the upper part, all impurities and liquid remain in the container. Additionally, the lid is equipped with an airbrush stand.
Cleaners and rods are used to thoroughly clean various elements of airbrushes: tips, nozzles, bodies and other elements. The needle, on the other hand, cleans the inside of the airbrush nozzle or other internal parts of the airbrush, such as the needle guide channel.
Container Height: 85mm, diameter: 100mm.
Un conjunto diseñado para la limpieza a fondo de cualquier aerógrafo.
Se usa un frasco de vidrio con un tapón de rosca de plástico para purgar el aerógrafo con el limpiador después de cada uso. Gracias a un filtro especial en la parte superior, todas las impurezas y líquidos permanecen en el recipiente. Además, la tapa está equipada con un soporte para aerógrafo.
Los limpiadores y las varillas se utilizan para limpiar a fondo varios elementos de los aerógrafos: puntas, boquillas, cuerpos y otros elementos. La aguja, por otro lado, limpia el interior de la boquilla del aerógrafo u otras partes internas del aerógrafo, como el canal de guía de la aguja.
Altura del contenedor: 85 mm, diámetro: 100 mm.
SURVIVAL WEATHERING BRUSHES SET
AK663
12,20€An arsenal of brushes designed by the weathering experts here at AK. Top quality weathering products require the right tools to be applied; our Survival Weathering Brush set is the right set of tools you need. Contained in this set are the brushes needed to streak, chip, wash, and apply pigments plus much more.
Includes:
Un arsenal de pinceles diseñados por los expertos en weathering de AK. Los productos de weathering de alta calidad requieren una aplicación con las herramientas adecuadas; nuestro juego de pinceles de supervivencia es el conjunto de herramientas adecuado que necesitas. En este juego se encuentran los pinceles necesarios para hacer líneas, desconchar, hacer lavados, aplicar pigmentos y mucho más.
Incluye:
AK050
6,20€Our odorless turpentine is very different from our white spirit. Besides being odorless, this product is softer and less aggressive than our White Spirit. This property of the odorless thinner (Turpentine) makes it great for delicate, soft and subtle blending. This thinner is exclusive to enamel and oil paint. This larger bottle gives you more thinner and costs less when compared to buying three 35ml bottles.
100 ml.
Nuestra trementina inodora es muy diferente de nuestro white spirit. Además de ser inodoro, este producto es más suave y menos agresivo que nuestro White Spirit. Esta propiedad del diluyente inodoro (Turpentine) lo hace ideal para mezclas delicadas, suaves y sutiles. Este diluyente es exclusivo para esmalte y pintura al óleo. Esta botella más grande le proporciona más diluyente y cuesta menos en comparación con la compra de tres botellas de 35 ml.
100 ml.
MAGNET ULTRA RESISTANT CYANOCRYLATE GLUE
AK12015
7,60€20g.
General-purpose cyanoacrylate 401. Fast drying, extra strong, low viscosity, specially formulated for adhesion between materials that can even have an acidic surface. Can be used with rubber, leather, wood, metal, resin and plastic. The surfaces to be joined must be free of dirt, dust and grease. A small amount of adhesive should be applied; more cyanoacrylate does not guarantee a better bond and makes more difficult the drying of the adhesive that is effective for bonding.
– 99% Cyano.
– Ethyl cyanoacrylate
– Use temperature: -55º to 120º
– Set time: between 3 and 10 seconds. The gaps and uneven surfaces can increase this setting time. It is not necessary to use clamps. Holding the pieces firmly for 10-30 seconds will ensure better adhesion.
– Definitive cure time: 24 h
– Viscosity: 110 mPa.S
– Shear strength: 21.0 MPa
* Bottles are not filled at a 100% to leave some air and make it work properly.
20g.
Cianoacrilato de uso general 401, secado rápido, extra fuerte, baja viscosidad especialmente formulado para la adhesión entre materiales que incluso pueden tener una superficie ácida. Se puede usar con caucho, cuero, madera, metal, resina y plástico. Las superficies a unir deben estar libres de suciedad, polvo y grasa. Se debe aplicar una pequeña cantidad de adhesivo; más cianoacrilato no garantiza una mejor unión y hace más difícil el secado del adhesivo que es efectivo para la unión.
– 99% Cyano
– Cianoacrilato de etilo
– Temperatura de uso: -55º a 120º
– Tiempo de fraguado: entre 3 y 10 segundos. Los huecos y las superficies irregulares pueden aumentar este tiempo de fraguado. No es necesario usar abrazaderas. Sostener las piezas firmemente durante 10-30 segundos asegurará una mejor adhesión.
– Tiempo de curado definitivo: 24 h.
– Viscosidad: 110 mPa.S
– Resistencia al corte: 21.0 MPa
*Las botellas no se llenan al 100% para dejar algo de aire y que funcione correctamente.
TOP LINE DELUXE Marta Kolinsky KIT
ABT850
80,95€AK183
5,60€The original one.
A high quality ultra matte varnish which can be applied with a brush or an airbrush to achieve a dead flat finish on any surface.
Acrylic Ultra Matte Varnish formulated for maximum airbrush performance. Water soluble, odorless, and non-toxic. Shake before each use. We recommend AK-712 Acrylic Thinner for thinning. Dries completely in 12 hours.
60 ml.
El Original.
Barniz ultra mate de alta calidad que puede ser aplicado con pincel o con aerógrafo para lograr un acabado mate en cualquier superficie.
Nuestro barniz ultra mate acrílico está formulado para el máximo rendimiento del aerógrafo. Soluble en agua, inodoro y no tóxico. Agitar antes de cada uso. Recomendamos AK-712 Acrylic Thinner para diluir. Se seca completamente en 12 horas.
60 ml.
AK9204
6,95€ENGLISH
AK11505
7,95€
ABT114
6,75€For precision works is necessary to keep the tip of your brushes in a perfect state. This gel is indicated to keep the tip sharp and in perfect use condition with all brushes fibers compacted and never open or deformed. With this gel you will keep your brushes always like new ones after using and cleaning them (it can be used after the application of our ABT117 Magic Potion for Brushes or any other chemical or natural cleaner).
Para trabajos de precisión es necesario mantener la punta de sus pinceles en perfecto estado. Este gel está indicado para mantener la punta afilada y en perfecto estado de uso con todas las fibras de los pinceles compactadas y nunca abiertas o deformadas. Con este gel mantendrá sus pinceles siempre como nuevos después de usarlos y limpiarlos (se puede utilizar después de la aplicación de nuestra Poción Mágica para Pinceles ABT117 o cualquier otro limpiador químico o natural).
AK9009
10,95€Precision cutting pliers with an ergonomic handle covered with an orange non-slip vinyl foam, with a spring return.
They make a clean and precise cut. No need to touch up.
Suitable for parts or rods of plastic, PVC, resin or ABS less than 4mm.
Do not use to cut metal parts.
Alicates de corte de precisión con mango ergonómico cubierto con espuma de vinilo naranja, antideslizante y con muelle de retorno.
Realizan un corte limpio y preciso sin que sea necesario retocar.
Adecuado para piezas o varillas de plástico, PVC, resina o ABS menores de 4mm.
No utilizar para cortar piezas de metal.
FA 614
19,50€A set designed for thorough cleaning of any airbrush.
A glass jar with a plastic screw cap is used to purge the airbrush with the cleaner after each use. Thanks to a special filter in the upper part, all impurities and liquid remain in the container. Additionally, the lid is equipped with an airbrush stand.
Cleaners and rods are used to thoroughly clean various elements of airbrushes: tips, nozzles, bodies and other elements. The needle, on the other hand, cleans the inside of the airbrush nozzle or other internal parts of the airbrush, such as the needle guide channel.
Container Height: 85mm, diameter: 100mm.
Un conjunto diseñado para la limpieza a fondo de cualquier aerógrafo.
Se usa un frasco de vidrio con un tapón de rosca de plástico para purgar el aerógrafo con el limpiador después de cada uso. Gracias a un filtro especial en la parte superior, todas las impurezas y líquidos permanecen en el recipiente. Además, la tapa está equipada con un soporte para aerógrafo.
Los limpiadores y las varillas se utilizan para limpiar a fondo varios elementos de los aerógrafos: puntas, boquillas, cuerpos y otros elementos. La aguja, por otro lado, limpia el interior de la boquilla del aerógrafo u otras partes internas del aerógrafo, como el canal de guía de la aguja.
Altura del contenedor: 85 mm, diámetro: 100 mm.
SURVIVAL WEATHERING BRUSHES SET
AK663
12,20€An arsenal of brushes designed by the weathering experts here at AK. Top quality weathering products require the right tools to be applied; our Survival Weathering Brush set is the right set of tools you need. Contained in this set are the brushes needed to streak, chip, wash, and apply pigments plus much more.
Includes:
Un arsenal de pinceles diseñados por los expertos en weathering de AK. Los productos de weathering de alta calidad requieren una aplicación con las herramientas adecuadas; nuestro juego de pinceles de supervivencia es el conjunto de herramientas adecuado que necesitas. En este juego se encuentran los pinceles necesarios para hacer líneas, desconchar, hacer lavados, aplicar pigmentos y mucho más.
Incluye:
AK050
6,20€Our odorless turpentine is very different from our white spirit. Besides being odorless, this product is softer and less aggressive than our White Spirit. This property of the odorless thinner (Turpentine) makes it great for delicate, soft and subtle blending. This thinner is exclusive to enamel and oil paint. This larger bottle gives you more thinner and costs less when compared to buying three 35ml bottles.
100 ml.
Nuestra trementina inodora es muy diferente de nuestro white spirit. Además de ser inodoro, este producto es más suave y menos agresivo que nuestro White Spirit. Esta propiedad del diluyente inodoro (Turpentine) lo hace ideal para mezclas delicadas, suaves y sutiles. Este diluyente es exclusivo para esmalte y pintura al óleo. Esta botella más grande le proporciona más diluyente y cuesta menos en comparación con la compra de tres botellas de 35 ml.
100 ml.
MAGNET ULTRA RESISTANT CYANOCRYLATE GLUE
AK12015
7,60€20g.
General-purpose cyanoacrylate 401. Fast drying, extra strong, low viscosity, specially formulated for adhesion between materials that can even have an acidic surface. Can be used with rubber, leather, wood, metal, resin and plastic. The surfaces to be joined must be free of dirt, dust and grease. A small amount of adhesive should be applied; more cyanoacrylate does not guarantee a better bond and makes more difficult the drying of the adhesive that is effective for bonding.
– 99% Cyano.
– Ethyl cyanoacrylate
– Use temperature: -55º to 120º
– Set time: between 3 and 10 seconds. The gaps and uneven surfaces can increase this setting time. It is not necessary to use clamps. Holding the pieces firmly for 10-30 seconds will ensure better adhesion.
– Definitive cure time: 24 h
– Viscosity: 110 mPa.S
– Shear strength: 21.0 MPa
* Bottles are not filled at a 100% to leave some air and make it work properly.
20g.
Cianoacrilato de uso general 401, secado rápido, extra fuerte, baja viscosidad especialmente formulado para la adhesión entre materiales que incluso pueden tener una superficie ácida. Se puede usar con caucho, cuero, madera, metal, resina y plástico. Las superficies a unir deben estar libres de suciedad, polvo y grasa. Se debe aplicar una pequeña cantidad de adhesivo; más cianoacrilato no garantiza una mejor unión y hace más difícil el secado del adhesivo que es efectivo para la unión.
– 99% Cyano
– Cianoacrilato de etilo
– Temperatura de uso: -55º a 120º
– Tiempo de fraguado: entre 3 y 10 segundos. Los huecos y las superficies irregulares pueden aumentar este tiempo de fraguado. No es necesario usar abrazaderas. Sostener las piezas firmemente durante 10-30 segundos asegurará una mejor adhesión.
– Tiempo de curado definitivo: 24 h.
– Viscosidad: 110 mPa.S
– Resistencia al corte: 21.0 MPa
*Las botellas no se llenan al 100% para dejar algo de aire y que funcione correctamente.
1/35 GERMAN HEAVY TANK SD.KFZ.182 KING TIGER
MM SPS-038
24,95€MM SS-002
63,95€D9 bulldozer which has been used by Israel Defense Forces (IDF) since 1956 is one of the best bulldozers in the world. In October 2003, Israel Aerospace Industries (IAI) developed an all-new armor protection suite- Daqhpor Memugan- for D9R bulldozers which are heavily equipped in the IDF. This armor suite consists of an armored cab with high visibility as well as protection for engine, fuel & oil tanks and hydraulic and electrical systems.
The D9R bulldozer owns good protection and could even protect against RPG attack after being fitted with slat armor. Light weapons like machine guns can be mounted on the top of the cab for self-defense. It has been proved to be an efficient and durable combat support platform.
KIT INFO
This 1/35 scale plastic model kit of D9R armored bulldozer perfectly represents mechanical beauty and weight of the real vehicle. Workable dozer blade and ripper are precisely and accurately modeled; rich cab interior details are provided; door and window can be built in open or closed position; workable track links are included; U.S. Armed Forces and IDF painting schemes are provided.
Total length: 247mm width: 126mm
La excavadora D9 que ha sido utilizada por las Fuerzas de Defensa de Israel (FDI) desde 1956 es una de las mejores excavadoras del mundo. En octubre de 2003, Israel Aerospace Industries (IAI) desarrolló un nuevo conjunto de protección de blindaje, Daqhpor Memugan, para excavadoras D9R que están fuertemente equipadas en las FDI. Este conjunto de blindaje consta de una cabina blindada con alta visibilidad, así como protección para motores, tanques de combustible y aceite y sistemas hidráulicos y eléctricos.
El bulldozer D9R posee una buena protección e incluso podría proteger contra el ataque RPG después de estar equipado con armadura de lamas. Se pueden montar armas ligeras como ametralladoras en la parte superior de la cabina para defenderse. Se ha demostrado que es una plataforma de apoyo de combate eficiente y duradera.
INFORMACIÓN DEL KIT
Este kit de modelo de plástico a escala 1/35 de bulldozer blindado D9R representa perfectamente la belleza mecánica y el peso del vehículo real. La hoja topadora y el desgarrador viables se modelan con precisión y precisión; se proporcionan detalles interiores de la cabina; la puerta y la ventana se pueden construir en posición abierta o cerrada; se incluyen enlaces de pistas viables; Se proporcionan esquemas de pintura de las Fuerzas Armadas de EE. UU. Y de las FDI.
Longitud total: 247 mm de ancho: 126 mm
1/35 GERMAN HEAVY TANK SD.KFZ.182 KING TIGER
MM SPS-038
24,95€Cookie | Duration | Description |
---|---|---|
PHPSESSID | session | This cookie is native to PHP applications. The cookie is used to store and identify a users' unique session ID for the purpose of managing user session on the website. The cookie is a session cookies and is deleted when all the browser windows are closed. |
viewed_cookie_policy | 1 year | The cookie is set by the GDPR Cookie Consent plugin to store whether or not the user has consented to the use of cookies. It does not store any personal data. |
Cookie | Duration | Description |
---|---|---|
pelm_last_loaded_shop_type | 1 month | No description available. |
woocommerce_recently_viewed | session | Description unavailable. |
wp_woocommerce_session_9205d68996927145eedf8afcab99571e | 2 days | No description |
yith_wcwl_session_9205d68996927145eedf8afcab99571e | 1 month | No description |
Cookie | Duration | Description |
---|---|---|
_fbp | 3 months | This cookie is set by Facebook to display advertisements when either on Facebook or on a digital platform powered by Facebook advertising, after visiting the website. |
fr | 3 months | Facebook sets this cookie to show relevant advertisements to users by tracking user behaviour across the web, on sites that have Facebook pixel or Facebook social plugin. |
loc | 1 year 1 month | AddThis sets this geolocation cookie to help understand the location of users who share the information. |
VISITOR_INFO1_LIVE | 5 months 27 days | A cookie set by YouTube to measure bandwidth that determines whether the user gets the new or old player interface. |
YSC | session | YSC cookie is set by Youtube and is used to track the views of embedded videos on Youtube pages. |
yt-remote-connected-devices | never | YouTube sets this cookie to store the video preferences of the user using embedded YouTube video. |
yt-remote-device-id | never | YouTube sets this cookie to store the video preferences of the user using embedded YouTube video. |
yt.innertube::nextId | never | This cookie, set by YouTube, registers a unique ID to store data on what videos from YouTube the user has seen. |
yt.innertube::requests | never | This cookie, set by YouTube, registers a unique ID to store data on what videos from YouTube the user has seen. |
Cookie | Duration | Description |
---|---|---|
_ga | 2 years | The _ga cookie, installed by Google Analytics, calculates visitor, session and campaign data and also keeps track of site usage for the site's analytics report. The cookie stores information anonymously and assigns a randomly generated number to recognize unique visitors. |
_ga_BK3V7Y3VZB | 2 years | This cookie is installed by Google Analytics. |
_gat_gtag_UA_105576964_1 | 1 minute | Set by Google to distinguish users. |
_gid | 1 day | Installed by Google Analytics, _gid cookie stores information on how visitors use a website, while also creating an analytics report of the website's performance. Some of the data that are collected include the number of visitors, their source, and the pages they visit anonymously. |
at-rand | never | AddThis sets this cookie to track page visits, sources of traffic and share counts. |
CONSENT | 2 years | YouTube sets this cookie via embedded youtube-videos and registers anonymous statistical data. |
uvc | 1 year 1 month | Set by addthis.com to determine the usage of addthis.com service. |
Cookie | Duration | Description |
---|---|---|
pll_language | 1 year | The pll _language cookie is used by Polylang to remember the language selected by the user when returning to the website, and also to get the language information when not available in another way. |