Weight | 1.04 kg |
---|---|
Dimensions | 38.5 × 24.5 × 5.5 cm |
Army | Hungarian |
Brands | |
Materials | Plastic |
Product | |
Pack | Single |
Scale | 1/35 |
Theme | AFV, Military |
AK Points
Availability: In stock
43,95€
Before the Second Wolrd War, the Hungarian Army’s tank forces consisted of mainly foreign tanks like the little Italian CV-33 tankette. After converting foreign tanks to suit their own needs in 1940 the Hungarians started to develop their own homegrown armoured fighting vehicles. First was the Turán I, built by the Weiss &Cspel Steelworks of Budapest. It was a medium tank with a five-man crew which was based on the hull of the Czech Skoda design similar to the German Panzer 38(t) and powered by 260hp Hungarian made engine. A refitted turret was able to mount a 40mm gun made by the Skoda works. By 1943 The Turán I was deemed under powered & under-gunned, so the further development of the type was required.
This new tank was called the Turán II, the designers mounted a new 75 mm (2.95 in) M41 short barreled gun to the tank and to fit it gave the tank an enlarged turret to house the massive breech loading system and a specially armoured recoil piston that was adapted to the gun. The turret interior was still cramped and crowded, but to help this the designers added new vents to extract the large amount of fumes that followed the firing of the gun. The 41M Turán II first appeared in May 1943, and a total of 139 were made by 1944.
The Turán II’s combat debut was in April 1944 in Galicia, they were used by the 1st & 2nd Hungarian Armored Divisions as well as the 1st Cavalry Division. First seeing action in 1944, in Galicia, the Turan II was completely outclassed by Russian T-34s and IS-2’s they faced. Unfortunately, many of the division’s forces were decimated in their actions defending Budapest and those that were not destroyed or captured were often abandoned on the battlefield.
Antes de la Segunda Guerra Mundial, las fuerzas de tanques del ejército húngaro consistían principalmente en tanques extranjeros como la pequeña tankette CV-33 italiana. Después de convertir tanques extranjeros para satisfacer sus propias necesidades en 1940, los húngaros comenzaron a desarrollar sus propios vehículos blindados de combate de cosecha propia. Primero fue el Turán I, construido por Weiss & Cspel Steelworks de Budapest. Era un tanque mediano con una tripulación de cinco hombres que se basaba en el casco del diseño checo Skoda similar al Panzer 38 (t) alemán y funcionaba con un motor de 260 hp fabricado en Hungría. Una torreta reacondicionada pudo montar un arma de 40 mm fabricada por las obras de Skoda. Para 1943, el Turán I se consideraba con poca potencia y menos armas, por lo que se requería un mayor desarrollo del tipo.
Este nuevo tanque se llamaba Turán II, los diseñadores montaron una nueva pistola de cañón corto M41 de 75 mm (2.95 in) en el tanque y para ajustarlo le dio al tanque una torreta ampliada para albergar el sistema de carga masiva de nalgas y un pistón de retroceso especialmente blindado eso fue adaptado al arma. El interior de la torreta todavía estaba abarrotado y abarrotado, pero para ayudar a esto, los diseñadores agregaron nuevos respiraderos para extraer la gran cantidad de humos que siguieron al disparo del arma. El 41M Turán II apareció por primera vez en mayo de 1943, y en 1944 se hicieron un total de 139.
El debut de combate del Turán II fue en abril de 1944 en Galicia, fueron utilizados por la 1ª y 2ª Divisiones Blindadas Húngaras, así como por la 1ª División de Caballería. Al ver la acción por primera vez en 1944, en Galicia, el Turan II fue completamente superado por los T-34 rusos y los IS-2 que enfrentaron. Desafortunadamente, muchas de las fuerzas de la división fueron diezmadas en sus acciones de defensa de Budapest y las que no fueron destruidas o capturadas fueron abandonadas en el campo de batalla.
Weight | 1.04 kg |
---|---|
Dimensions | 38.5 × 24.5 × 5.5 cm |
Army | Hungarian |
Brands | |
Materials | Plastic |
Product | |
Pack | Single |
Scale | 1/35 |
Theme | AFV, Military |
SURVIVAL WEATHERING BRUSHES SET
AK663
12,20€An arsenal of brushes designed by the weathering experts here at AK. Top quality weathering products require the right tools to be applied; our Survival Weathering Brush set is the right set of tools you need. Contained in this set are the brushes needed to streak, chip, wash, and apply pigments plus much more.
Includes:
Un arsenal de pinceles diseñados por los expertos en weathering de AK. Los productos de weathering de alta calidad requieren la aplicación de las mismas con las herramientas adecuadas; nuestro juego de pinceles de supervivencia es el conjunto de herramientas adecuado que necesitas. En este juego se encuentran los pinceles necesarios para rayar, astillar, lavar y aplicar pigmentos y mucho más.
Incluye:
TOP LINE DELUXE Marta Kolinsky KIT
ABT850
71,95€AK8064
12,75€The Wet Palette is a tool mainly used by figure painters, but more and more it is being used by people that paint with acrylics. It will extend the useful life of any acrylic so that it can be used for hours and once shut it will preserve the colors and color mixtures. It can be kept in the fridge.
It has three components:
1.Sponge, to hold large quantities of water, since it is quite thick.
2.Cloth made of fiber, placed on top of the sponge as a leveler, humidity filter, and as an interchangeable element in case of stains or if not used for a long time.
3.High quality special Paper, made of a fine silicone film, allows the transfer of humidity but prevents water forming and paints from dissolving, and does not give off any fibers not hairs when worked with the brushes.
The Wet Palette is watertight and airtight, made of the same material of marine containers for flares, charts, and medicines. Its locks guarantee the seal. This extends the life of paints, especially in Summer, hot climates, and under extreme conditions.
*Dimensions: 16 x 13 x 4 cm.
It contains:
?· Need more info? Click here
AK183
5,25€A high quality ultra matte varnish which can be applied with a brush or an airbrush to achieve a dead flat finish on any surface.
Acrylic Ultra Matte Varnish formulated for maximum airbrush performance. Water soluble, odorless, and non-toxic. Shake before each use. We recommend AK-712 Acrylic Thinner for thinning. Dries completely in 12 hours.
60 ml.
Barniz ultra mate de alta calidad que puede ser aplicado con pincel o con aerógrafo para lograr un acabado plano en cualquier superficie.
Barniz ultra mate acrílico formulado para el máximo rendimiento del aerógrafo. Soluble en agua, inodoro y no tóxico. Agitar antes de cada uso. Recomendamos AK-712 Acrylic Thinner para diluir. Se seca completamente en 12 horas.
60 ml.
AK9204
6,50€ENGLISH Merchandising product.
Sport bottle.
Cruiser Aluminum Bottle 400ml – Black with White logo.
Aluminum. With carabiner. Capacity: 400 ml.
ESPAÑOL Producto de Merchandising.
Botella de deporte.
Botella Aluminio Cruiser 400ml – Negro con logo Blanco.
Aluminio. Con mosquetón. Capacidad: 400 ml.
AK12004
4,95€40 ml.
Special square anti rolling base.
Ultra-thin precision maxoma fiber brush.
1. Special density.
2. Glue by capillary action, quick drying.
The Extra Thin Citrus Cement glues by capillary action with a medium / fast drying time, and has a mild citrus aroma. It is undoubtedly the best option for general assembly work. Great performance with the perfect viscosity for plastic modeling.
*Same characteristics as our AK12002 Extra Thin Cement but with an aromatic touch.
40 ml.
Base especial antivuelco cuadrada.
Pincel de fibra maxoma de precisión ultrafina.
1. Densidad especial.
2. Pegamento por capilaridad, uniones muy rápidas.
El Extra Fino Cítrico tiene las características del pegamento extra fino pero con un aroma cítrico suave. Para pegar por capilaridad con un tiempo de secado medio / rápido, es sin duda la mejor opción para el trabajo de montaje general. Gran rendimiento con la viscosidad perfecta para modelar plástico.
*Las mismas características que nuestro AK12002 Extra Thin Cement pero con un toque aromático.
ABT114
6,50€For precision works is necessary to keep the tip of your brushes in a perfect state. This gel is indicated to keep the tip sharp and in perfect use condition with all brushes fibers compacted and never open or deformed. With this gel you will keep your brushes always like new ones after using and cleaning them (it can be used after the application of our ABT117 Magic Potion for Brushes or any other chemical or natural cleaner).
AK9009
9,90€Description language || Idioma de la descripción:
ENGLISH
Precision cutting pliers with an ergonomic handle covered with an orange non-slip vinyl foam, with a spring return.
They make a clean and precise cut. No need to touch up.
Suitable for parts or rods of plastic, PVC, resin or ABS less than 4mm.
Do not use to cut metal parts.
Alicates de corte de precisión con mango ergonómico cubierto con espuma de vinilo naranja, antideslizante y con muelle de retorno.
Realizan un corte limpio y preciso sin que sea necesario retocar.
Adecuado para piezas o varillas de plástico, PVC, resina o ABS menores de 4mm.
No utilizar para cortar piezas de metal.
FA 614
18,95€A set designed for thorough cleaning of any airbrush.
A glass jar with a plastic screw cap is used to purge the airbrush with the cleaner after each use. Thanks to a special filter in the upper part, all impurities and liquid remain in the container. Additionally, the lid is equipped with an airbrush stand.
Cleaners and rods are used to thoroughly clean various elements of airbrushes: tips, nozzles, bodies and other elements. The needle, on the other hand, cleans the inside of the airbrush nozzle or other internal parts of the airbrush, such as the needle guide channel.
Container Height: 85mm, diameter: 100mm.
Un conjunto diseñado para la limpieza a fondo de cualquier aerógrafo.
Se usa un frasco de vidrio con un tapón de rosca de plástico para purgar el aerógrafo con el limpiador después de cada uso. Gracias a un filtro especial en la parte superior, todas las impurezas y líquidos permanecen en el recipiente. Además, la tapa está equipada con un soporte para aerógrafo.
Los limpiadores y las varillas se utilizan para limpiar a fondo varios elementos de los aerógrafos: puntas, boquillas, cuerpos y otros elementos. La aguja, por otro lado, limpia el interior de la boquilla del aerógrafo u otras partes internas del aerógrafo, como el canal de guía de la aguja.
Altura del contenedor: 85 mm, diámetro: 100 mm.
MAGNET ULTRA RESISTANT CYANOCRYLATE GLUE
AK12015
7,60€20g.
General-purpose cyanoacrylate 401. Fast drying, extra strong, low viscosity, specially formulated for adhesion between materials that can even have an acidic surface. Can be used with rubber, leather, wood, metal, resin and plastic. The surfaces to be joined must be free of dirt, dust and grease. A small amount of adhesive should be applied; more cyanoacrylate does not guarantee a better bond and makes more difficult the drying of the adhesive that is effective for bonding.
– 99% Cyano.
– Ethyl cyanoacrylate
– Use temperature: -55º to 120º
– Set time: between 3 and 10 seconds. The gaps and uneven surfaces can increase this setting time. It is not necessary to use clamps. Holding the pieces firmly for 10-30 seconds will ensure better adhesion.
– Definitive cure time: 24 h
– Viscosity: 110 mPa.S
– Shear strength: 21.0 MPa
* Bottles are not filled at a 100% to leave some air and make it work properly.
20g.
Cianoacrilato de uso general 401, secado rápido, extra fuerte, baja viscosidad especialmente formulado para la adhesión entre materiales que incluso pueden tener una superficie ácida. Se puede usar con caucho, cuero, madera, metal, resina y plástico. Las superficies a unir deben estar libres de suciedad, polvo y grasa. Se debe aplicar una pequeña cantidad de adhesivo; más cianoacrilato no garantiza una mejor unión y hace más difícil el secado del adhesivo que es efectivo para la unión.
– 99% Cyano
– Cianoacrilato de etilo
– Temperatura de uso: -55º a 120º
– Tiempo de fraguado: entre 3 y 10 segundos. Los huecos y las superficies irregulares pueden aumentar este tiempo de fraguado. No es necesario usar abrazaderas. Sostener las piezas firmemente durante 10-30 segundos asegurará una mejor adhesión.
– Tiempo de curado definitivo: 24 h.
– Viscosidad: 110 mPa.S
– Resistencia al corte: 21.0 MPa
*Las botellas no se llenan al 100% para dejar algo de aire y que funcione correctamente.
SURVIVAL WEATHERING BRUSHES SET
AK663
12,20€An arsenal of brushes designed by the weathering experts here at AK. Top quality weathering products require the right tools to be applied; our Survival Weathering Brush set is the right set of tools you need. Contained in this set are the brushes needed to streak, chip, wash, and apply pigments plus much more.
Includes:
Un arsenal de pinceles diseñados por los expertos en weathering de AK. Los productos de weathering de alta calidad requieren la aplicación de las mismas con las herramientas adecuadas; nuestro juego de pinceles de supervivencia es el conjunto de herramientas adecuado que necesitas. En este juego se encuentran los pinceles necesarios para rayar, astillar, lavar y aplicar pigmentos y mucho más.
Incluye:
TOP LINE DELUXE Marta Kolinsky KIT
ABT850
71,95€AK8064
12,75€The Wet Palette is a tool mainly used by figure painters, but more and more it is being used by people that paint with acrylics. It will extend the useful life of any acrylic so that it can be used for hours and once shut it will preserve the colors and color mixtures. It can be kept in the fridge.
It has three components:
1.Sponge, to hold large quantities of water, since it is quite thick.
2.Cloth made of fiber, placed on top of the sponge as a leveler, humidity filter, and as an interchangeable element in case of stains or if not used for a long time.
3.High quality special Paper, made of a fine silicone film, allows the transfer of humidity but prevents water forming and paints from dissolving, and does not give off any fibers not hairs when worked with the brushes.
The Wet Palette is watertight and airtight, made of the same material of marine containers for flares, charts, and medicines. Its locks guarantee the seal. This extends the life of paints, especially in Summer, hot climates, and under extreme conditions.
*Dimensions: 16 x 13 x 4 cm.
It contains:
?· Need more info? Click here
AK183
5,25€A high quality ultra matte varnish which can be applied with a brush or an airbrush to achieve a dead flat finish on any surface.
Acrylic Ultra Matte Varnish formulated for maximum airbrush performance. Water soluble, odorless, and non-toxic. Shake before each use. We recommend AK-712 Acrylic Thinner for thinning. Dries completely in 12 hours.
60 ml.
Barniz ultra mate de alta calidad que puede ser aplicado con pincel o con aerógrafo para lograr un acabado plano en cualquier superficie.
Barniz ultra mate acrílico formulado para el máximo rendimiento del aerógrafo. Soluble en agua, inodoro y no tóxico. Agitar antes de cada uso. Recomendamos AK-712 Acrylic Thinner para diluir. Se seca completamente en 12 horas.
60 ml.
AK9204
6,50€ENGLISH Merchandising product.
Sport bottle.
Cruiser Aluminum Bottle 400ml – Black with White logo.
Aluminum. With carabiner. Capacity: 400 ml.
ESPAÑOL Producto de Merchandising.
Botella de deporte.
Botella Aluminio Cruiser 400ml – Negro con logo Blanco.
Aluminio. Con mosquetón. Capacidad: 400 ml.
AK12004
4,95€40 ml.
Special square anti rolling base.
Ultra-thin precision maxoma fiber brush.
1. Special density.
2. Glue by capillary action, quick drying.
The Extra Thin Citrus Cement glues by capillary action with a medium / fast drying time, and has a mild citrus aroma. It is undoubtedly the best option for general assembly work. Great performance with the perfect viscosity for plastic modeling.
*Same characteristics as our AK12002 Extra Thin Cement but with an aromatic touch.
40 ml.
Base especial antivuelco cuadrada.
Pincel de fibra maxoma de precisión ultrafina.
1. Densidad especial.
2. Pegamento por capilaridad, uniones muy rápidas.
El Extra Fino Cítrico tiene las características del pegamento extra fino pero con un aroma cítrico suave. Para pegar por capilaridad con un tiempo de secado medio / rápido, es sin duda la mejor opción para el trabajo de montaje general. Gran rendimiento con la viscosidad perfecta para modelar plástico.
*Las mismas características que nuestro AK12002 Extra Thin Cement pero con un toque aromático.
MM HS-006
12,50€MM HS-002
12,50€MM SS-002
63,95€D9 bulldozer which has been used by Israel Defense Forces (IDF) since 1956 is one of the best bulldozers in the world. In October 2003, Israel Aerospace Industries (IAI) developed an all-new armor protection suite- Daqhpor Memugan- for D9R bulldozers which are heavily equipped in the IDF. This armor suite consists of an armored cab with high visibility as well as protection for engine, fuel & oil tanks and hydraulic and electrical systems.
The D9R bulldozer owns good protection and could even protect against RPG attack after being fitted with slat armor. Light weapons like machine guns can be mounted on the top of the cab for self-defense. It has been proved to be an efficient and durable combat support platform.
KIT INFO
This 1/35 scale plastic model kit of D9R armored bulldozer perfectly represents mechanical beauty and weight of the real vehicle. Workable dozer blade and ripper are precisely and accurately modeled; rich cab interior details are provided; door and window can be built in open or closed position; workable track links are included; U.S. Armed Forces and IDF painting schemes are provided.
Total length: 247mm width: 126mm
La excavadora D9 que ha sido utilizada por las Fuerzas de Defensa de Israel (FDI) desde 1956 es una de las mejores excavadoras del mundo. En octubre de 2003, Israel Aerospace Industries (IAI) desarrolló un nuevo conjunto de protección de blindaje, Daqhpor Memugan, para excavadoras D9R que están fuertemente equipadas en las FDI. Este conjunto de blindaje consta de una cabina blindada con alta visibilidad, así como protección para motores, tanques de combustible y aceite y sistemas hidráulicos y eléctricos.
El bulldozer D9R posee una buena protección e incluso podría proteger contra el ataque RPG después de estar equipado con armadura de lamas. Se pueden montar armas ligeras como ametralladoras en la parte superior de la cabina para defenderse. Se ha demostrado que es una plataforma de apoyo de combate eficiente y duradera.
INFORMACIÓN DEL KIT
Este kit de modelo de plástico a escala 1/35 de bulldozer blindado D9R representa perfectamente la belleza mecánica y el peso del vehículo real. La hoja topadora y el desgarrador viables se modelan con precisión y precisión; se proporcionan detalles interiores de la cabina; la puerta y la ventana se pueden construir en posición abierta o cerrada; se incluyen enlaces de pistas viables; Se proporcionan esquemas de pintura de las Fuerzas Armadas de EE. UU. Y de las FDI.
Longitud total: 247 mm de ancho: 126 mm
MM HS-006
12,50€Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.