Roof section add-on

This effect is special to imitate the accumulation of earth in vehicles

EFFECTS:
Apply the product by using a medium sized round soft paintbrush. Deposit onto your scale model around details, seams and in holes creating acumulated earth effects. Let the product dry for about 15 minutes then clean the excess using a brush dampened with Thinner for Washes. Use a fine pointy 00 size brush to apply more refined pin-washes where you feel they might be necessary such as in weld seams and around bolts, wheels, rivets or low parts. It also can be combined with plaster for more texture.

Light amber colored stain for create spilled fuel effects

EFFECTS MODE OF USE:
Apply using a medium or fine sized round soft paintbrush. Apply the product with the brush in different lays of different intensities for the most realistic effects. Let the effect dry for about 15 minutes then clean the excess using a brush dampened with Thinner for Washes. Can be used alone or in combination with other effects to create a range of spilled fuel effects. Create fuel stains with this enamel effect for the most realistic vehicles.

Special wash for tracks and dark rust effects.

WASH TECHNIQUE:
Apply the wash using a medium sized round soft paintbrush. Deposit the wash onto your scale model around details, seams and in holes creating fake shadows hi-lighting details. Let the wash dry for about 15 minutes then clean the excess using a brush dampened with Thinner for Washes. Use a fine pointy 00 size brush to apply more refined pin-washes where you feel they might be necessary such as in weld seams and around bolts and rivets.

These are last generation filters with featuring fine suspended pigments for a perfect transparent effect and the set contains 3 filters ready to use easily and directly on your model. These colors are specially to use on sand and desert tones. Use the filters by moistening a brush and applying it without flooding the surface, to enrich hues in your models, unify camouflage, or highlight areas with a different tone. With these products we will avoid mixing paints, looking for the correct dilution, or searching for the correct colors for our vehicle. These filters are enamel based and can be cleaned or diluted with Odorless Enamel Thinner.

Contains:

• F400 Grey for yellow sand
• F401 Ochre for light sand
• F402 Brown for dark & desert yellow

Very soft thinner special for modelism in washes, filters, effects…

If you want to go further on rust effects

WASH TECHNIQUE:
Apply the wash using a medium sized round soft paintbrush. Deposit the wash on to your scale model around details, seams and in holes creating fake shadows hi-lighting details. Let the wash dry for about 15 minutes then clean the excess using a brush dampened with Thinner for Washes. Use a fine pointy 00 size brush to apply more refined pin-washes where you feel they might be necessary such as in weld seams and around bolts and rivets.

To create realistic rust effects over all types of scale models

EFFECTS:
Apply the effects using a medium sized round soft paintbrush. Deposit the wash onto your scale model around details, seams and in holes creating fake shadows hi-lighting details. Let dry for about 15 minutes then clean the excess using a brush dampened with Thinner for Washes. Use a fine pointy 00 size brush to apply more refined pin-washes where you feel they might be necessary such as in weld seams and around bolts and rivets. The efect can be used in vertical lines to create streaking effects.

Product to create the grimy appearance and accumulated dirt of well used engines

EFFECTS:
Apply the effect using a medium sized round soft paintbrush. Work with the product onto your scale model in desired areas like engines or mechanisms creating the grimy and accumulated dirt of well used engines appearance. Let dry for about 15 minutes then clean the excess if is needed by using a brush dampened with Thinner for Washes.

General wash for high contrasts.

WASH TECHNIQUE:
Apply the wash using a medium sized round soft paintbrush. Deposit the wash on to your scale model around details, seams and in holes creating fake shadows hi-lighting details. Let the wash dry for about 15 minutes then clean the excess using a brush dampened with Thinner for Washes. Use a fine pointy 00 size brush to apply more refined pin-washes where you fou feel they might be necessary such as in weld seams and around bolts and rivets.