AK Points
- View as:
- Filter your selection
- Sort by:
Resin Model kits Shop
Buy our resin model kits. Epoxy resin water resistant to extend the life of your pieces. Create a lot of scenes of battles with our resin model kits and epoxy resin dioramas.-
KING TIGER – SCALE THICKNESS HULL PLATES 1/35
MP35-129
64,95€ENGLISHKING TIGER – SCALE THICKNESS HULL PLATES
1/35 Scale complete resin kit.
Useful for a King Tiger in a factory, a K.O. King Tiger or an accurate King Tiger using DML as base kit.
Included are photo-etched details such as an accurate detailed fire-wall, along with frames for mounting the upper engine and driver’s compartment covers.
Also included are colored step-by-step instructions to aid you with easy fabrication of accurate weld for the plates.
KING TIGER – ESPESOR DE PLANCHAS A ESCALA
Kit completo de resina escala 1/35.
Útil para un King Tiger en una fábrica, un K.O. King Tiger o un King Tiger preciso usando DML como kit base.
Se incluyen fotograbados detallados, como un cortafuegos detallado y preciso, junto con marcos para montar el motor superior y las cubiertas del compartimento del conductor.
También se incluyen instrucciones paso a paso a color para ayudarte de una manera sencilla con la fabricación de soldaduras precisas para las placas.
-
FLAT RAIL WAGON RESIN KIT 1/72
MP72-351
19,95€ENGLISHDetailed resin model kit of a Deutsche Reichsbahn (German State Railway) two-axle flat wagon with low side panels.
Open wagons were designed primarily for the transportation of bulk goods that are not weather-sensitive and can usually be dumped or shoveled.
1:72 scale resin kit.
*INCLUDES ASSEMBLY INSTRUCTIONS
Maqueta de resina detallada de un vagón plano de dos ejes de Deutsche Reichsbahn (Ferrocarril estatal alemán) con paneles laterales bajos.
Los vagones abiertos se diseñaron principalmente para el transporte de mercancías a granel que no retengan la humedad y, por lo general, puedan volcarse, arrojarse o palearse.
Kit de resina detallado a escala 1:72.
*INCLUYE INSTRUCCIONES DE MONTAJE
-
MP72-082
24,95€ENGLISHDetailed resin model kit of a Deutsche Reichsbahn Gedeckter Güterwagen G10 (German State Railway Covered G10 Wagon), in 1:72 scale.
These freight cars formed the backbone of the German railway wagon park during World War II and after, and were used for transportation of various goods and people throughout Europe.
1:72 scale resin kit.
*INCLUDES ASSEMBLY INSTRUCTIONS
Vagón de ferrocarril alemán cerrado tipo G10.
Este vagón ferroviario sin motor se utilizó para el transporte de todo tipo de carga en las vías alemanas y de distintos países de Europa durante la Segunda Guerra Mundial y después de la guerra.
Kit de resina detallado a escala 1:72.
*INCLUYE INSTRUCCIONES DE MONTAJE
-
1/35 BRITISH TANK CREWMAN EATING – NORTH AFRICA 1942
MP35-423
11,95€ENGLISHResin figure of a British Tank Crewmen eating a meal, in 1:35 scale.
The figure is inspired by a photo taken during the campaign against the Afrika Korps and Regio Esercito.
Note the unorothodox clothing and equipment – the dress code wasn’t religiously followed in Egypt, one wore what was warm and comfortable.
This figure will be a nice model on its own or a perfect addition to a vignette or diorama from the North African campaign.
Figura de resina de un carrista Británico comiendo una comida, en escala 1/35.
La figura está inspirada en una foto tomada durante la campaña contra Afrika Korps y Regio Esercito.
Tenga en cuenta la ropa y el equipo poco ortodoxos: el código de vestimenta no se seguía religiosamente en Egipto, uno usaba lo que era cálido y cómodo.
Esta figura será un buen modelo por sí sola o un complemento perfecto para una viñeta o un diorama de la campaña del norte de África.
-
HIGHLANDER CLANSMAN 1746 – 90MM RESIN FIGURE
MP90-151
29,95€ENGLISHThe fierce fighters Highlanders of the clans of Highland Scotland proved to be an almost constant thorn in the side of a series of British monarchs was for nearly 60 years.
In 1746 at Culloden Moor, was fought the last battle of the uprising of the “fortyfive”.
The Battle of Culloden, was the final confrontation between the Jacobite army of Charles Edward Stuart and the Hannover government forces of King George II.
This figure in 90mm is a clasic among these historic scale figures.
Los feroces luchadores Highlanders de los clanes de las Tierras Altas de Escocia demostraron ser una espina casi constante en el costado de una serie de monarcas británicos durante casi 60 años.
En 1746 en Culloden Moor, se libró la última batalla del levantamiento de los “cuarenta y cinco”.
La Batalla de Culloden fue el enfrentamiento final entre el ejército jacobita de Charles Edward Stuart y las fuerzas gubernamentales de Hannover del rey Jorge II.
Esta figura en 90 mm es un clásico en esta clase de figuras históricas.
-
1/35 WSS ‘HJ’ PANZER OFFICER – NORMANDY 1944
MP35-420
11,95€ENGLISHHigh quality resin figure scale 1/35.
Figure for paint alone or for use in your scenes.
The figures are based on a photo of Untersturmführer Willy Kändler and Unterscharführer Willy Kretzschmar from 5. Kompanie of 12. SS-Division ‘HJ’.
Figura de resina de alta calidad a escala 1/35.
Figura para pintar sola o para usar en una escena.
Las figuras se basan en una foto del Untersturmführer Willy Kändler y el Unterscharführer Willy Kretzschmar de la 5ª Compañía de la 12ª División SS ‘HJ’.
-
1/35 WSS ‘HJ’ PANZER NCO – NORMANDY 1944
MP35-421
11,95€ENGLISHHigh quality resin figure scale 1/35.
Figure for paint alone or for use in your scenes.
The figures are based on a photo of Untersturmführer Willy Kändler and Unterscharführer Willy Kretzschmar from 5. Kompanie of 12. SS-Division ‘HJ’.
Figura de resina de alta calidad a escala 1/35.
Figura para pintar sola o para usar en una escena.
Las figuras se basan en una foto del Untersturmführer Willy Kändler y el Unterscharführer Willy Kretzschmar de la 5ª Compañía de la 12ª División SS ‘HJ’.
-
1/35 WSS ‘HJ’ PANZER COMMANDERS – NORMANDY 1944
MP35-422
21,90€ENGLISHHigh quality resin figures scale 1/35.
Figures for paint alone or for use in your scenes.
Includes ref. MP35-420 and MP35-421.
The figures are based on a photo of Untersturmführer Willy Kändler and Unterscharführer Willy Kretzschmar from 5. Kompanie of 12. SS-Division ‘HJ’.
Figuras de resina de alta calidad a escala 1/35.
Figuras para pintar solas o para usar en una escena.
Incluye las ref. MP35-420 y MP35-421.
Las figuras se basan en una foto del Untersturmführer Willy Kändler y el Unterscharführer Willy Kretzschmar de la 5ª Compañía de la 12ª División SS ‘HJ’.
-
K.O. T34 DESTROYED T34 TANK 1/35
MP35-018
39,90€ENGLISHHigh quality resin model scale 1/35.
Destroyed T-34 front part with interior.
Tank model to use as a complement in your dioramas or as an independent piece.
Modelo en resina de alta calidad a escala 1/35.
Parte delantera del T-34 destruida con interior.
Modelo de tanque para usar como complemento en tus dioramas o como pieza independiente.
-
K.O. PzIV F_Destroyed tank 1/35
MP35-127
51,00€ENGLISHK.O. PzIV F Destroyed tank for dioramas.
Scale 1:35.
Complete resin Kit.
Includes step-by-step assembly instructions.
Distortion, impacts and other various types of damage have been engineered into the appropriate parts.
K.O. PzIV F Destroyed tank for dioramas. Escala 1:35.
Kit de resina completo.
Incluye instrucciones de montaje paso a paso.
La distorsión, los impactos y otros diversos tipos de daños han sido diseñados en las partes apropiadas.
-
BOOTS PRINTS 80’S CIVILIAN CASUAL SNEAKERS
MP35-409
9,90€ENGLISHCivil sneaker prints from the 80’s and also present in the current Middle East conflicts.
Includes 4 pieces:
- Right and left foot made of polyurethane resin to make footprints by pressure.
- Right and left foot made of polyurethane rubber to make footprints by stamping.
- The use of oil paints for a more realistic finish is recommended.
Huellas de zapatillas civiles de los años 80 y también presentes en los conflictos actuales de Oriente Medio.
Incluye 4 piezas:
- Pie derecho e izquierdo de resina de poliuretano para hacer huellas por presión.
- Pie derecho e izquierdo de goma de poliuretano para hacer huellas mediante estampado.
- Se recomienda el uso de pinturas al óleo para un acabado más realista.
-
BOOT PRINTS RUSSIAN MODERN BOOTS
MP35-408
9,90€ENGLISHModern Russian boot prints.
Includes 4 pieces:
- Right and left foot made of polyurethane resin to make footprints by pressure.
- Right and left foot made of polyurethane rubber to make footprints by stamping.
- The use of oil paints for a more realistic finish is recommended.
Huellas de botas rusas modernas.
Incluye 4 piezas:
- Pie derecho e izquierdo de resina de poliuretano para hacer huellas por presión.
- Pie derecho e izquierdo de goma de poliuretano para hacer huellas mediante estampado.
- Se recomienda el uso de pinturas al óleo para un acabado más realista.
-
BOOT PRINTS AMERICAN MODERN BOOTS
MP35-407
9,90€ENGLISHModern American boot prints used in Vietnam and even during the ODS in 1991 and OIF in 2003.
Includes 4 pieces:
- Right and left foot made of polyurethane resin to make footprints by pressure.
- Right and left foot made of polyurethane rubber to make footprints by stamping.
- The use of oil paints for a more realistic finish is recommended.
Huellas de botas americanas modernas utilizadas en Vietnam e incluso durante las SAO en 1991 y la OIF en 2003.
Incluye 4 piezas:
- Pie derecho e izquierdo de resina de poliuretano para hacer huellas por presión.
- Pie derecho e izquierdo de goma de poliuretano para hacer huellas mediante estampado.
- Se recomienda el uso de pinturas al óleo para un acabado más realista.
-
BOOT PRINTS RUSSIAN WWII BOOTS
MP35-406
9,90€ENGLISHSoviet boot prints from the Second World War period.
Includes 4 pieces:
- Right and left foot made of polyurethane resin to make footprints by pressure.
- Right and left foot made of polyurethane rubber to make footprints by stamping.
- The use of oil paints for a more realistic finish is recommended.
Huellas de botas soviéticas de la Segunda Guerra Mundial.
Incluye 4 piezas:
- Pie derecho e izquierdo de resina de poliuretano para hacer huellas por presión.
- Pie derecho e izquierdo de goma de poliuretano para hacer huellas mediante estampado.
- Se recomienda el uso de pinturas al óleo para un acabado más realista.
-
BOOT PRINTS AMERICAN WWII BOOTS
MP35-405
9,90€ENGLISHAmerican boot prints from the Second World War period.
Includes 4 pieces:
- Right and left foot made of polyurethane resin to make footprints by pressure.
- Right and left foot made of polyurethane rubber to make footprints by stamping.
- The use of oil paints for a more realistic finish is recommended.
Huellas de botas americanas de la Segunda Guerra Mundial.
Incluye 4 piezas:
- Pie derecho e izquierdo de resina de poliuretano para hacer huellas por presión.
- Pie derecho e izquierdo de goma de poliuretano para hacer huellas mediante estampado.
- Se recomienda el uso de pinturas al óleo para un acabado más realista.
-
MP35-404
9,90€ENGLISHGerman boot prints from the Second World War period.
Includes 4 pieces:
- Right and left foot made of polyurethane resin to make footprints by pressure.
- Right and left foot made of polyurethane rubber to make footprints by stamping.
- The use of oil paints for a more realistic finish is recommended.
Huellas de bota alemana de la Segunda Guerra Mundial.
Incluye 4 piezas:
- Pie derecho e izquierdo de resina de poliuretano para hacer huellas por presión.
- Pie derecho e izquierdo de goma de poliuretano para hacer huellas mediante estampado.
- Se recomienda el uso de pinturas al óleo para un acabado más realista.
-
MP35-279
19,95€Resin 1:35 Helping Comrad (WWII Soviet) figures for paint alone or for use in your scenes.
*Limited units
-
RUSSIAN SUBMARINE – PROJECT 613 1/35
MP35-417
300,00€ENGLISHLimited edition in serographed wooden box of the central section of a Soviet Whiskey Class submarine.
They entered service with the Soviet navy between 1951 and 1958. Modified in a large number of variants (including a civilian one) and used to perform multiple tests for the development of new weapon systems, it remained in service until 1993.
This highly detailed resin kit depicts the sail and a portion of the center section of a Soviet Whiskeyclass submarine.
Dimension: 45 cm long x 11 cm wide x 20 cm high (Box dimensions 52x30x10.5) Specially to make it in its years of decay, which can be modeled as a wreck left in a scrapyard.
It can also be made operative. This class of submarines presents differences from one to another but different variants can be made with small basic modifications.
Several photos of these can be found, providing you with great inspiration as to how to turn this kit into an eyecatching replica.
This is a limited release, so don’t miss this chance and order it today!Edición limitada en caja de madera serigrafiada de la sección central de un submarino soviético de
la clase Whiskey. Entraron en servicio en la armada soviética entre 1951 y 1958. Modificados
en un gran número de variantes (incluida una civil) y utilizados para realizar múltiples pruebas para el desarrollo de nuevos sistemas de armas, permanecieron en servicio hasta 1993.
Este kit de resina altamente detallado reproduce el puente de mando y una parte de la sección central de un submarino soviético de clase Whiskey.
Dimensiones: 45 cm de largo x 11 cm de ancho x 20 cm de alto (caja 52 x 30 x 10,5)
Especialmente para hacerla en sus años de decadencia, que puede ser ambientada como un submarino abandonado en un desguace. También se puede hacer operativo.
Esta clase de submarinos tienen diferencias de una a otra variante que se pueden representar con pequeñas modificaciones básicas. Es fácil encontrar fotos que proporcionarán una gran inspiración para convertir este kit en una réplica llamativa.
Esta es una versión limitada, así que no pierda esta oportunidad y pídala hoy mismo!
-
PROFESSIONAL PHOTOGRAPHER 1/35
MP35-418
11,95€ENGLISHResin figure of a photographer at 1/35 scale for the use in vignettes and dioramas, modern era.
He is dressed in light clothes which makes it suitable to be placed in Middle East scenarios or any current conflict, from the Balkans to Syria.
It is also a perfect complement to any alternative scene.Figura en resina de un fotógrafo a escala 1/35 para el uso en viñetas y dioramas de era moderna.
Está ataviado con ropa ligera que permite situarlo en escenarios de oriente medio o cualquier conflicto actual, desde los Balcanes hasta Siria.
También es un complemento perfecto para cualquier escena alternativa.
-
MP72-412
10,90€Description language || Idioma de la descripción:
HQ resin parts.
It contains 6 figures.
Scale 1/72.
Piezas de resina de alta calidad.
Incluye 6 figuras.
Escala 1/72
-
MP72-414
33,95€Description language || Idioma de la descripción:
HQ resin parts.
Contains photoetches and instructions inside
Scale 1/72.
Piezas de resina de alta calidad.
Contiene fotograbados e instrucciones en su interior.
Escala 1/72
-
MP35-415
32,95€Description language || Idioma de la descripción:
HQ resin parts.
Contains 9 parts
Scale 1/35.
Piezas de resina de alta calidad.
Comtiene 9 partes.
Escala 1/35
-
“EASTER GIFTS” WWII U.S. ARTILLERY CREW
MP35-416
19,90€Description language || Idioma de la descripción:
HQ resin parts.
Contains 2 figures
Scale 1/35.
Piezas de resina de alta calidad.
Contiene 2 figuras.
Escala 1/35
-
MP35-109
11,95€ENGLISHIt includes 12 resin parts.
Scale 1/35.
Incluye 12 piezas de resina.
Escala 1/35
-
MP72-092
7,90€Description language || Idioma de la descripción:
It includes 3 resin figures.
Scale 1/72.
Incluye 3 figuras de resina.
Escala 1/72
-
MP72-093
7,90€Description language || Idioma de la descripción:
It includes 3 resin figures.
Scale 1/72.
Incluye 3 figuras de resina.
Escala 1/72
-
EUROPEAN HARBOUR / RAILWAY CARGO CRANE
MP35-114
32,95€Description language || Idioma de la descripción:
Instructions inside
Scale 1/35.
Instrucciones en el interior.
Escala 1/35
-
MP35-410
21,95€ENGLISH200 x 130mm
Scale 1/35, resin model.
200 x 130mm
Escala 1/35, modelo de resina.
-
MP35-411
10,95€ENGLISHIncludes 21 pieces
Scale 1/35.
Incluye 21 piezas.
Escala 1/35
-
MP35-412
10,95€ENGLISHIncludes 20 pieces.
Scale 1/35
Incluye 20 piezas.
Escala 1/35
-
MP35-105
12,50€ENGLISH1/35 scale, 2 units.
Resin parts.
Escala 1/35, 2 unidades.
Piezas de resina.
-
MP35-267
5,50€ENGLISH1/35 scale.
Resin parts.
Escala 1/35.
Piezas de resina.
-
MP72-084
9,50€ENGLISH1/72 scale.
Resin parts.
Escala 1/72.
Piezas de resina.
-
MP72-413
26,95€Description language || Idioma de la descripción:
1/72 scale.
Resin parts. Attached example images and instructions.
Escala 1/72.
Piezas de resina. Se adjuntan imagenes de ejemplo e instrucciones.
-
U.S. SOUVENIR HUNTER, EUROPE 1943-1945
MP35-403
11,95€Description language || Idioma de la descripción:
Figure based on a real soldier image after taking possession of a tank (U.S. SOUVENIR HUNTER – EUROPE 1943-1945).
*1/35 scale
Figura basada en una imagen real de un soldado después de tomar posesión de un tanque (US SOUVENIR HUNTER – EUROPE 1943-1945).
* Escala 1/35
-
MP35-413
10,95€*Scale 1/35
Includes 13 pieces.
-
MP72-410
10,90€ENGLISH1/72 scale.
Escala 1/72.
-
MP35-402
36,95€Resin 1:35 scale.
Includes chimney and debris. 235 mm
Complete kit to make a factory chimney destroyed with some of its pieces. This resin kit offers great potential for dioramas with figures and/or vehicles and is also a spectacular piece in itself.
-
MP35-334
11,95€Resin 1:35 Figure of American doctor to paint alone or to use in his scenes.
-
PACIFIC SHERMAN FIELD ARMOR UPDATE
MP35-373
26,95€Photoetched and resin parts for the conversion of the DML6441 kit (Model kit not included).
This conversion allows you to make an attractive version of the Sherman in the Pacific campaign.
An original and different kit.
-
MP35-253
450,00€This is a 1/35 scale armoured Soviet Motorboat BK1125 cast resin model kit. Its resin casting is top quality, with the large hull and deck sections being perfectly without any warping and the smaller parts free of any air holes or other blemishes. The most part of the pieces has been improved respect the previous in this deluxe limited edition. As the kit is a very limited edition with 1 figure bonus and a deluxe wooden box it could well become a collector’s item.
*Recommended for ages 14 and over
HISTORY: The BK boats were used between 1939 and 1945 on all European fronts from Austria to Stalingrad and in all rivers and were armed with different combinations of turrets and KATUSKA rockets for bombardment with the model depicting a boat with three 12.7mm machine gun turrets from the T-28 or T-35 tank and a 76.2mm T-34 Model 1941 main turret.
The BK boat had a 10 man Naval infantry crew and were transported by train to move the units from a river to river and was specially designed to cross tunnels and bridges on board train wagons. The Soviets used these ships in frontal attacks against other land tanks or enemy infantry with those armed with KATUSKA rockets for bombardment against fortifications or cities (Vienna in Austria was bombed with these ships).The BK boats can be painted in 4 different camouflage schemes:
- Light Grey
- White, Grey and light grey
- Green
- Green and Brown, like the T-34 tanks.
? – Watch the ad video clicking here
-
MP35-259
250,00€This is a 1/35 scale armoured Soviet Motorboat BK1125 cast resin model kit. Its resin casting is top quality, with the large hull and deck sections being perfectly without any warping and the smaller parts free of any air holes or other blemishes. The most part of the pieces has been improved respect the previous in this deluxe limited edition. As the kit is a very limited edition with 1 figure bonus and a deluxe wooden box it could well become a collector’s item.
This half sunken version of the original Mig Productions Bronekater kit is designed in a manner that displays it rest in at an angle with the rear submersed. This kit will add a fantastic and chaotic appearance to any Eastern Front shoreline diorama. The cut hull sits absolutely flat on the ground. The boat is accurately designed, containing a detailed armoured cabin, three turrets and numerous hatches. A section containing a large shell hole is also included coloured step-by-step instructions showing how to install this unique part into the deck. Metal chains for the railings and other accessories are also included .*Recommended for ages 14 and over
HISTORY: The BK boats were used between 1939 and 1945 on all European fronts from Austria to Stalingrad and in all rivers and were armed with different combinations of turrets and KATUSKA rockets for bombardment with the model depicting a boat with three 12.7mm machine gun turrets from the T-28 or T-35 tank and a 76.2mm T-34 Model 1941 main turret. The BK boat had a 10 man Naval infantry crew and were transported by train to move the units from a river to river and was specially designed to cross tunnels and bridges on board train wagons.
The Soviets used these ships in frontal attacks against other land tanks or enemy infantry with those armed with KATUSKA rockets for bombardment against fortifications or cities (Vienna in Austria was bombed with these ships).
The BK boats can be painted in 4 different camouflage schemes:
- Light Grey
- White, Grey and light grey
- Green
- Green and Brown, like the T-34 tanks.
? – Watch the ad video clicking here
-
MP35-167
11,95€Resin 1:35 Lebanese tanker figure for paint alone or for use in your scenes.
-
MP35-179
11,95€Resin 1:35 Instructing Iraqi commander figure for paint alone or for use in your scenes.