| Weight | 0.1 kg |
|---|---|
| Dimensions | 20 × 15 × 10 cm |
AK Points
BOOTS PRINTS 80’S CIVILIAN CASUAL SNEAKERS
9,90€
ENGLISH
ESPAÑOL
Civil sneaker prints from the 80’s and also present in the current Middle East conflicts.
Includes 4 pieces:
- Right and left foot made of polyurethane resin to make footprints by pressure.
- Right and left foot made of polyurethane rubber to make footprints by stamping.
- The use of oil paints for a more realistic finish is recommended.
Huellas de zapatillas civiles de los años 80 y también presentes en los conflictos actuales de Oriente Medio.
Incluye 4 piezas:
- Pie derecho e izquierdo de resina de poliuretano para hacer huellas por presión.
- Pie derecho e izquierdo de goma de poliuretano para hacer huellas mediante estampado.
- Se recomienda el uso de pinturas al óleo para un acabado más realista.
Custom Tab Content here.
Tail sed sausage magna quis commodo swine. Aliquip strip steak esse ex in ham hock fugiat in. Labore velit pork belly eiusmod ut shank doner capicola consectetur landjaeger fugiat excepteur short loin. Pork belly laboris mollit in leberkas qui. Pariatur swine aliqua pork chop venison veniam. Venison sed cow short loin bresaola shoulder cupidatat capicola drumstick dolore magna shankle.
Tail sed sausage magna quis commodo swine. Aliquip strip steak esse ex in ham hock fugiat in. Labore velit pork belly eiusmod ut shank doner capicola consectetur landjaeger fugiat excepteur short loin. Pork belly laboris mollit in leberkas qui. Pariatur swine aliqua pork chop venison veniam. Venison sed cow short loin bresaola shoulder cupidatat capicola drumstick dolore magna shankle.
Related Products to BOOTS PRINTS 80’S CIVILIAN CASUAL SNEAKERS
P239
4,95€Very soft thinner special for modelism in washes, filters, effects…
F246
3,25€Use on green colors.
With this filter you will be able to change subtle base coats.
*New formulated special purpose filter featuring fine suspended pigments for a perfect transparent effect.
FILTER TECHNIQUES: Apply the filter using a soft medium sized round paintbrush.Deposit the filter onto your scale model in areas where you want to alter the base tone. Let the filter dry for about 15 minutes. With this technique you will be able to fade, unify, and enrich the colors. You will also be able to tint the contrast between colors and get perfect transitions. Use each filter in the appropiate tone to get maximum efficient.
F240
3,25€Use on grey colors and metallic finishes.
With this filter you will be able to work in dark grey tones giving a subtle blue tone to make the base much more rich in shades and more attractive.
*New formulated special purpose filter featuring fine suspended pigments for a perfect transparent effect.
FILTER TECHNIQUES: Apply the filter using a soft medium sized round paintbrush.Deposit the filter onto your scale model in areas where you want to alter the base tone. Let the filter dry for about 15 minutes. With this technique you will be able to fade, unify, and enrich the colors. You will also be able to tint the contrast between colors and get perfect transitions. Use each filter in the appropiate tone to get maximum efficient.
P409
5,75€Get real wet appearence and humidity effects on vehicles or dioramas.
EFFECTS:
Apply the effect using a fine sized round soft paintbrush. Work with the product onto your scale model in desired areas getting a slight sheen creating the appearance of dampness, moisture, and wetness. Let dry for about 15 minutes then clean the excess, if is needed, by using a brush dampened with Thinner for Washes. You can also use in verical lines like rain effects.
P223
5,75€Starship wash Special SCIFI
WASH TECHNIQUE:
Apply the wash using a medium sized round soft paintbrush. Deposit the wash onto your scale model around details, seams and in holes creating fake shadows hi-lighting details. Let the wash dry for about 15 minutes then clean the excess using a brush dampened with Thinner for Washes. Use a fine pointy 00 size brush to apply more refined pin-washes where you feel they might be necessary such as in weld seams and around bolts and rivets
P705
6,35€Very soft thinner special for modelism in washes, filters, effects…
P280
5,75€Special wash for tracks and dark rust effects.
WASH TECHNIQUE:
Apply the wash using a medium sized round soft paintbrush. Deposit the wash onto your scale model around details, seams and in holes creating fake shadows hi-lighting details. Let the wash dry for about 15 minutes then clean the excess using a brush dampened with Thinner for Washes. Use a fine pointy 00 size brush to apply more refined pin-washes where you feel they might be necessary such as in weld seams and around bolts and rivets.
P411
5,75€To create realistic rust effects over all types of scale models
EFFECTS:
Apply the effects using a medium sized round soft paintbrush. Deposit the wash onto your scale model around details, seams and in holes creating fake shadows hi-lighting details. Let dry for about 15 minutes then clean the excess using a brush dampened with Thinner for Washes. Use a fine pointy 00 size brush to apply more refined pin-washes where you feel they might be necessary such as in weld seams and around bolts and rivets. The efect can be used in vertical lines to create streaking effects.
Acumulated Earth effect (75ml)
P300
5,75€This effect is special to imitate the accumulation of earth in vehicles
EFFECTS:
Apply the product by using a medium sized round soft paintbrush. Deposit onto your scale model around details, seams and in holes creating acumulated earth effects. Let the product dry for about 15 minutes then clean the excess using a brush dampened with Thinner for Washes. Use a fine pointy 00 size brush to apply more refined pin-washes where you feel they might be necessary such as in weld seams and around bolts, wheels, rivets or low parts. It also can be combined with plaster for more texture.
P281
5,75€General wash for high contrasts.
WASH TECHNIQUE:
Apply the wash using a medium sized round soft paintbrush. Deposit the wash on to your scale model around details, seams and in holes creating fake shadows hi-lighting details. Let the wash dry for about 15 minutes then clean the excess using a brush dampened with Thinner for Washes. Use a fine pointy 00 size brush to apply more refined pin-washes where you fou feel they might be necessary such as in weld seams and around bolts and rivets.
P264
9,75€These are last generation filters with featuring fine suspended pigments for a perfect transparent effect and the set contains 3 filters ready to use easily and directly on your model. These colors are specially to use on sand and desert tones. Use the filters by moistening a brush and applying it without flooding the surface, to enrich hues in your models, unify camouflage, or highlight areas with a different tone. With these products we will avoid mixing paints, looking for the correct dilution, or searching for the correct colors for our vehicle. These filters are enamel based and can be cleaned or diluted with Odorless Enamel Thinner.
Contains:
- F400 Grey for yellow sand
- F401 Ochre for light sand
- F402 Brown for dark & desert yellow
Wash for Desert sand BASE (75ml)
P284
5,75€For all WWII and modern vehicles & aircrafts painted in sand yellow and desert camos
WASH TECHNIQUE:
Apply the wash using a medium sized round soft paintbrush. Deposit the wash onto your scale model around details, seams and in holes creating fake shadows hi-lighting details. Let the wash dry for about 15 minutes then clean the excess using a brush dampened with Thinner for Washes. Use a fine pointy 00 size brush to apply more refined pin-washes where you feel they might be necessary such as in weld seams and around bolts and rivets.
P239
4,95€Very soft thinner special for modelism in washes, filters, effects…
F246
3,25€Use on green colors.
With this filter you will be able to change subtle base coats.
*New formulated special purpose filter featuring fine suspended pigments for a perfect transparent effect.
FILTER TECHNIQUES: Apply the filter using a soft medium sized round paintbrush.Deposit the filter onto your scale model in areas where you want to alter the base tone. Let the filter dry for about 15 minutes. With this technique you will be able to fade, unify, and enrich the colors. You will also be able to tint the contrast between colors and get perfect transitions. Use each filter in the appropiate tone to get maximum efficient.
F240
3,25€Use on grey colors and metallic finishes.
With this filter you will be able to work in dark grey tones giving a subtle blue tone to make the base much more rich in shades and more attractive.
*New formulated special purpose filter featuring fine suspended pigments for a perfect transparent effect.
FILTER TECHNIQUES: Apply the filter using a soft medium sized round paintbrush.Deposit the filter onto your scale model in areas where you want to alter the base tone. Let the filter dry for about 15 minutes. With this technique you will be able to fade, unify, and enrich the colors. You will also be able to tint the contrast between colors and get perfect transitions. Use each filter in the appropiate tone to get maximum efficient.
P409
5,75€Get real wet appearence and humidity effects on vehicles or dioramas.
EFFECTS:
Apply the effect using a fine sized round soft paintbrush. Work with the product onto your scale model in desired areas getting a slight sheen creating the appearance of dampness, moisture, and wetness. Let dry for about 15 minutes then clean the excess, if is needed, by using a brush dampened with Thinner for Washes. You can also use in verical lines like rain effects.
P223
5,75€Starship wash Special SCIFI
WASH TECHNIQUE:
Apply the wash using a medium sized round soft paintbrush. Deposit the wash onto your scale model around details, seams and in holes creating fake shadows hi-lighting details. Let the wash dry for about 15 minutes then clean the excess using a brush dampened with Thinner for Washes. Use a fine pointy 00 size brush to apply more refined pin-washes where you feel they might be necessary such as in weld seams and around bolts and rivets
P705
6,35€Very soft thinner special for modelism in washes, filters, effects…
P280
5,75€Special wash for tracks and dark rust effects.
WASH TECHNIQUE:
Apply the wash using a medium sized round soft paintbrush. Deposit the wash onto your scale model around details, seams and in holes creating fake shadows hi-lighting details. Let the wash dry for about 15 minutes then clean the excess using a brush dampened with Thinner for Washes. Use a fine pointy 00 size brush to apply more refined pin-washes where you feel they might be necessary such as in weld seams and around bolts and rivets.
P411
5,75€To create realistic rust effects over all types of scale models
EFFECTS:
Apply the effects using a medium sized round soft paintbrush. Deposit the wash onto your scale model around details, seams and in holes creating fake shadows hi-lighting details. Let dry for about 15 minutes then clean the excess using a brush dampened with Thinner for Washes. Use a fine pointy 00 size brush to apply more refined pin-washes where you feel they might be necessary such as in weld seams and around bolts and rivets. The efect can be used in vertical lines to create streaking effects.
Acumulated Earth effect (75ml)
P300
5,75€This effect is special to imitate the accumulation of earth in vehicles
EFFECTS:
Apply the product by using a medium sized round soft paintbrush. Deposit onto your scale model around details, seams and in holes creating acumulated earth effects. Let the product dry for about 15 minutes then clean the excess using a brush dampened with Thinner for Washes. Use a fine pointy 00 size brush to apply more refined pin-washes where you feel they might be necessary such as in weld seams and around bolts, wheels, rivets or low parts. It also can be combined with plaster for more texture.
P281
5,75€General wash for high contrasts.
WASH TECHNIQUE:
Apply the wash using a medium sized round soft paintbrush. Deposit the wash on to your scale model around details, seams and in holes creating fake shadows hi-lighting details. Let the wash dry for about 15 minutes then clean the excess using a brush dampened with Thinner for Washes. Use a fine pointy 00 size brush to apply more refined pin-washes where you fou feel they might be necessary such as in weld seams and around bolts and rivets.
P264
9,75€These are last generation filters with featuring fine suspended pigments for a perfect transparent effect and the set contains 3 filters ready to use easily and directly on your model. These colors are specially to use on sand and desert tones. Use the filters by moistening a brush and applying it without flooding the surface, to enrich hues in your models, unify camouflage, or highlight areas with a different tone. With these products we will avoid mixing paints, looking for the correct dilution, or searching for the correct colors for our vehicle. These filters are enamel based and can be cleaned or diluted with Odorless Enamel Thinner.
Contains:
- F400 Grey for yellow sand
- F401 Ochre for light sand
- F402 Brown for dark & desert yellow
Wash for Desert sand BASE (75ml)
P284
5,75€For all WWII and modern vehicles & aircrafts painted in sand yellow and desert camos
WASH TECHNIQUE:
Apply the wash using a medium sized round soft paintbrush. Deposit the wash onto your scale model around details, seams and in holes creating fake shadows hi-lighting details. Let the wash dry for about 15 minutes then clean the excess using a brush dampened with Thinner for Washes. Use a fine pointy 00 size brush to apply more refined pin-washes where you feel they might be necessary such as in weld seams and around bolts and rivets.