No products in the cart.
AK Points
-
FOAM TEXTURIZER & SEALER – FOR BUILDINGS AND DIORAMAS 250ml
AK8039
8,95€ENGLISH
Foam Sealer is a fine paste intended for sealing any type of foam.
This paste does not damage the foam and protects it from subsequent aggressive processes.
It is an acrylic product, so you can dilute it with water and clean your tools easily.
We recommend to apply it with a spatula to distribute the paste over the foam.
Dries in one hour (depending on the thickness of the applied layer and the environmental conditions).
Comes in a neutral white color not to affect the further paint layers.
Close the packaging well, allowing the product to last longer.
Use a spatula or an old brush for handling.Volume: 250ml.
ESPAÑOL
Foam Sealer es una pasta fina destinada a sellar cualquier tipo de espuma.
Esta pasta no daña la espuma y la protege de los procesos agresivos posteriores.
Es un producto acrílico, por lo que puede diluirlo con agua y limpiar sus herramientas fácilmente.
Recomendamos aplicarlo con una espátula para distribuir la pasta sobre la espuma.
Se seca en una hora (dependiendo del grosor de la capa aplicada y las condiciones ambientales).
Viene en un color blanco neutro para no afectar las capas de pintura adicionales.Volumen: 250ml.
-
GREENPOWER 2 COMPONENT MODELING PUTTY
AK8208
5,95€GREENPOWER is an epoxy putty that when mixed both components at room temperature allows to recreate any model’s piece. Once mixed both components the result becomes a sticky green putty. Then you have about 90 minutes to mold and detail, reaching maximum hardness after 24 hours.
To obtain smoother surfaces it is recommended to use a lubricant such as water, oil, or vaseline, in order to prevent unwanted settling of the putty. The tools must be always lubricated or moistened, and talcum powder can be used to avoid fingerprints, or to add texture. Altering the proportions of both components produces a greater or lesser hardness and hardening faster or slower. Storing the putty in a cool area or even in the refrigerator will keep it in better condition and will last longer.
This product contains 2 stripes of 10cm of putty.
-
AK897
7,90€ENGLISHESPAÑOLNew product to create texture of cast in any plastic, resin or metal part of your model. It can be used for military, Scify, Gundam or any model branch to create a cast effect only with this acrylic paste. Just extend, work and let dry. Your models will have a complete different appearance.
130g.
Nuevo producto para crear textura de fundición en cualquier parte de plástico, resina o metal de su modelo. Se puede usar para militares, Scifi, Gundam o cualquier tipo de modelo para crear un efecto de fundición solo con esta pasta acrílica. Simplemente extienda, trabaje y deje secar. Sus modelos tendrán una apariencia completamente diferente.
130g.
-
AK104
4,50€High quality grey acrylic putty, standard hardness (20ml, 39 gr.). Polyurethane water based one component product. It does not shrink when drying. Specially designed for modeling. Superfine filler with perfect adhesion and sanding properties. It is water based so there is no smelly chemicals in the mix to cause skin and respiratory problems. Can be cleaned off with water.
-
AK103
4,50€High quality white acrylic putty, extra hard, (20 ml, 39 gr.). Polyurethane water based. One component product. It does not shrink when drying. Specially designed for modeling. Superfine filler with perfect adhesion and sanding properties. It is water based so there is no smelly chemicals in the mix to cause skin and respiratory problems. It can be cleaned off with water
Current category:
-