| Weight | .4 kg |
|---|---|
| Dimensions | 20 x 20 x 2 cm |
AK Real Colors
GREENPOWER 2 COMPONENT MODELING PUTTY
5,95€
GREENPOWER is an epoxy putty that when mixed both components at room temperature allows to recreate any model’s piece. Once mixed both components the result becomes a sticky green putty. Then you have about 90 minutes to mold and detail, reaching maximum hardness after 24 hours.
To obtain smoother surfaces it is recommended to use a lubricant such as water, oil, or vaseline, in order to prevent unwanted settling of the putty. The tools must be always lubricated or moistened, and talcum powder can be used to avoid fingerprints, or to add texture. Altering the proportions of both components produces a greater or lesser hardness and hardening faster or slower. Storing the putty in a cool area or even in the refrigerator will keep it in better condition and will last longer.
This product contains 2 stripes of 10cm of putty.
Custom Tab Content here.
Tail sed sausage magna quis commodo swine. Aliquip strip steak esse ex in ham hock fugiat in. Labore velit pork belly eiusmod ut shank doner capicola consectetur landjaeger fugiat excepteur short loin. Pork belly laboris mollit in leberkas qui. Pariatur swine aliqua pork chop venison veniam. Venison sed cow short loin bresaola shoulder cupidatat capicola drumstick dolore magna shankle.
Tail sed sausage magna quis commodo swine. Aliquip strip steak esse ex in ham hock fugiat in. Labore velit pork belly eiusmod ut shank doner capicola consectetur landjaeger fugiat excepteur short loin. Pork belly laboris mollit in leberkas qui. Pariatur swine aliqua pork chop venison veniam. Venison sed cow short loin bresaola shoulder cupidatat capicola drumstick dolore magna shankle.
Related Products to GREENPOWER 2 COMPONENT MODELING PUTTY
ABT116
6,50€Surfactants-active nonionic gel, especially designed for the care of hands and utensils after using oil paints. You don´t need to use water, just apply and rub and dry it with a suitable cloth piece.Suitable only for the most elite modelers.
AK050
5,90€Our odorless turpentine is very different from our white spirit. Besides being odorless, this product is softer and less aggressive than our White Spirit. This property of the odorless thinner (Turpentine) makes it great for delicate, soft and subtle blending. This thinner is exclusive to enamel and oil paint. This larger bottle gives you more thinner and costs less when compared to buying three 35ml bottles.
AK777
2,20€Acrylic Glossy Varnish formulated for maximum airbrush performance -. Water soluble, odorless, and non-toxic. Shake before each use. We recommend AK-712 Acrylic Thinner for thinning. Dries completely in 12 hours.
AK236
6,95€SUPER special product which CONVERTS any acrylic paint into washable, just think of the effects that can be achieved on any kind of scale models.
Developed by AK and no other brands has this product.
Add a 10% of this product to your acrylic paint to make it washable. Once the mix is applied you can remove the desired quantity with a brush moistened in water. This product is recommended for winter camouflages, to create any dust effects, or to imitate the lesser quality paints used on some vehicles, for example in the desert where the paint underneath was released little by little. The result is very convincing as it is based on the same principle as the real paint. The possibilities are endless because the effect can be used with any color.
AK118
5,90€Adhesive to fix down all kinds of earth, gravel, small stones, sand, etc to your bases. This special adhesive, with an alcohol base, is much more effective than the traditional white glue. The white glue tends to leave a plastic finish over the surface giving an unreal aspect and also tends not to expand well through the material. But this new adhesive expands rapidly and is adsorbed by the stones and sand saving a lot of time when fixing down rubble for example. This product is easily cleaned using alcohol, can be applied using an airbrush or paint brush and the drying process can be accelerated with a hairdryer or any other type of heat source. Although it’s matt when it dries, on smooth surfaces it can leave a light satin mark, however, this can be removed with a matt varnish.
Original product of AK-interactive, don’t choose copies.
ABT117
6,50€This high quality cleaner and restorer for brushes is indicated for modellers that want to have their brushes like new ones again. It contain no solvents no alcohols that can damage synthetic or natural brush´s hair. It´s recommended to dip the tip of the brush in this liquid for 24 hours for deep cleaning and restoration, and repeat the process if necessary with seriously damaged brushes. This product will extend the life of your brushes more than any other cleaner. Used in combination with the ABT 114 Magic Gel for brushes it will keep your brushes as new as the first day.
AK712
3,95€Water based thinner especially designed for use with AK-Interactive acrylics. Our non-toxic, low odor thinner is also compatible for use with other brands.
Not just the typical alcohol and water based thinner, our specially formulated product is ideal for creating the perfect paint consistency for brush and airbrush. Non-toxic and odorless.
INTERMEDIATE GAUZY AGENT SHINE ENHANCER 100 ml
ak894
5,95€High quality product to create a protective and very realistic glossy sheen to areas where applied. This product also serves as a protective layer for the paint underneath. Apply in the way you would with any varnish. Apply and let dry for a few minutes. This product can also serve as a perfect finishing touch for metallic paints such as AK Interactive Xtreme Metal. Apply Gauzy Agent to any single part or sections of your model that are begging for an incredible transparent shine. With self-leveling properties, it can be applied with brush or airbrush.
ABT115
6,50€Liquid mask is quite popular among modelers for protecting parts that don’t need to be painted. Our liquid mask has a characteristic blue tone and sweet smell of vanilla, is not aggressive and will not cause damage even on clear plastic parts. It dries quickly leaving the masked surface free of paint, and finally it can be removed as a thin elastic film.
IMPORTANT: CLOSE THE BOTTLE ONCE USED FOR PRESERVATION
AK582
5,95€Liquid to adapt your decals to any surface. Wet the decal with the solution and a brush after place it. Leave for a few minutes, then with the help of the brush, adapt it to the surface to fully integrate it. With this product no decal will resist, no matter how complicated the surface be. And only with one product!