• View as:
  • Sidebar
  • Sort by:

Basics Shop

basic products for scale modeling
  • PIGMENT FIXER

    AK048

    3,50

    Recommended product to adhere pigments to the surfaces of your models and bases. Use capillary effect to allow fluid to flow over pigment powder. Once dried, pigments are permanently adhered to the surface and return to dry color.

  • MODELING WHITE PUTTY

    ak103

    4,50

    High quality white acrylic putty, extra hard, (20 ml, 39 gr.). Polyurethane water based. One component product. It does not shrink when drying. Specially designed for modeling. Superfine filler with perfect adhesion and sanding properties. It is water based so there is no smelly chemicals in the mix to cause skin and respiratory problems. It can be cleaned off with water

  • MODELING grey PUTTY

    ak104

    4,50

    High quality grey acrylic putty, standard hardness (20ml, 39 gr.). Polyurethane water based one component product. It does not shrink when drying. Specially designed for modeling. Superfine filler with perfect adhesion and sanding properties. It is water based so there is no smelly chemicals in the mix to cause skin and respiratory problems. Can be cleaned off with water.

  • Gravel and Sand Fixer

    AK118

    5,90

    Adhesive to fix down all kinds of earth, gravel, small stones, sand, etc to your bases. This special adhesive, with an alcohol base, is much more effective than the traditional white glue. The white glue tends to leave a plastic finish over the surface giving an unreal aspect and also tends not to expand well through the material. But this new adhesive expands rapidly and is adsorbed by the stones and sand saving a lot of time when fixing down rubble for example. This product is easily cleaned using alcohol, can be applied using an airbrush or paint brush and the drying process can be accelerated with a hairdryer or any other type of heat source. Although it’s matt when it dries, on smooth surfaces it can leave a light satin mark, however, this can be removed with a matt varnish.
    Original product of AK-interactive, don’t choose copies.

  • Metal burnishing fluid

    AK159

    5,95

    A new faster formula (works in seconds), and at a more competitive price. We have extensively tested and formulated, and improved this product, here at AK-Interactive. With our Metal Burnishing fluid, you can naturally weather and rust white metal tracks, such as those made by Friulmodel or ours. Just dip the tracks in the liquid for a few seconds and the metal will begin to appear dark and rusty very quickly, easily and effortlessly. You can vary the effect using different dilutions and varying lengths of soak. Using less product, you can achieve even better results than with our previous formula.

  • PHOTOETCH BURNISHING

    AK174

    5,95

    New formula, improved, faster and at a more competitive price. This liquid will darken the photo etch brass parts, and also barrels of machine guns and tank barrels. The end result with brass parts is a finish which is very similar to steel. It is highly recommended to darken your photo-etch parts before use.

  • Paint Stripper

    AK186

    6,50

    The definitive liquid to strip the paint completely or selectively from
    models or figures without damaging the plastic, resin or white metal.

  • WASHABLE AGENT

    AK236

    6,95

    SUPER special product which CONVERTS any acrylic paint into washable, just think of the effects that can be achieved on any kind of scale models.
    Developed by AK and no other brands has this product.
    Add a 10% of this product to your acrylic paint to make it washable. Once the mix is applied you can remove the desired quantity with a brush moistened in water. This product is recommended for winter camouflages, to create any dust effects, or to imitate the lesser quality paints used on some vehicles, for example in the desert where the paint underneath was released little by little. The result is very convincing as it is based on the same principle as the real paint. The possibilities are endless because the effect can be used with any color.

  • decal adapter solution

    AK582

    5,95

    Liquid to adapt your decals to any surface. Wet the decal with the solution and a brush after place it. Leave for a few minutes, then with the help of the brush, adapt it to the surface to fully integrate it. With this product no decal will resist, no matter how complicated the surface be. And only with one product!

  • Weathering Plaster Base

    AK617

    4,95

    A must have product for any modeler who wants to add volume to their mud and soil mixtures whether is for a diorama or to be splashed on to their vehicle. Mix the plaster in with any of our high quality Nature Effects line of different types of mud, earth, dust and soil. The combinations are endless. If your mixture is too thick you can dilute it with white spirit. If is too thin, add more plaster. Either paint your mixture on to your diorama or load a paint brush with your mixture and using your airbrush, blow short bursts of air at the brush to recreate splatters.

  • MIX N’ READY GLASS 10ML

    AK620

    4,50

    Now you can keep your mixes in crystal bottles contains 10 ml and includes 4 bottles

  • TEXTURIZER ACRYLIC RESIN

    AK665

    5,95

    100ml bottle. High quality acrylic resin to mix with pigments to fix textures and with a matte finish. TEXTURIZER can be used to make terrains and lower parts of vehicles

  • drying retarder

    ak737

    4,90

    Liquid to slow down the drying times for any acrylic paint. To use simply add a few drops to your airbrush and will prevent fast drying at the tip of the airbrush especially in high temperature conditions.
    Also can be used to apply with brush to get glazing effects, or just delay dry in a controled way. Non-toxic and odorless.

  • MODELING PAINT WELLS

    AK8206

    3,60

    Our paint wells are everlasting tools that no bench should be without!

    The 12 metal wells included in this set can be used for any type of paints and related products: enamels, acrylics, lacquers, alcohol, acetone or any other type of thinner. They allow us to prepare a variety of mixtures at the same time.

  • MODELING STIRRING BARS

    AK8207

    4,50

    These stirring bars are made from stainless steel, and are therefore very resistant and can be used with no risk for mixing any of your preferred paints and related products. These tools will allow you to comfortably mix your paints, and also make adding the particular colors to the mixtures in a very precise way a lot easier!

  • GREENPOWER 2 COMPONENT MODELING PUTTY

    AK8208

    5,95

    GREENPOWER is an epoxy putty that when mixed both components at room temperature allows to recreate any model’s piece. Once mixed both components the result becomes a sticky green putty. Then you have about 90 minutes to mold and detail, reaching maximum hardness after 24 hours.

    To obtain smoother surfaces it is recommended to use a lubricant such as water, oil, or vaseline, in order to prevent unwanted settling of the putty. The tools must be always lubricated or moistened, and talcum powder can be used to avoid fingerprints, or to add texture. Altering the proportions of both components produces a greater or lesser hardness and hardening faster or slower. Storing the putty in a cool area or even in the refrigerator will keep it in better condition and will last longer.

     

    This product contains 2 stripes of 10cm of putty.

  • STAINLESS STEEL SHAKERS (250)

    AK892

    4,20

    Ensure that any of your paints and weathering products are well mixed; simply drop one stainless steel ball into the product container and shake – just like a rattle can! Contains 250 stainless steel balls, at a very low price.

  • GAUZY AGENT GLASS COAT 100 ml

    ak893

    6,50

    High quality product developed to enhance, repair, and achieve extremely realistic transparent glass-like finishes on clear plastic parts. Simply dip and let dry for a few minutes. The bottle is think to dip parts without problem. Clean excess around the edges to achieve a uniform layer. For best results, allow product to dry in a dust-free environment. This product, when applied to clear plastic, will result in a realistic glass-like appearance on parts like clear plastic cockpit canopies or other clear parts.

  • INTERMEDIATE GAUZY AGENT SHINE ENHANCER 100 ml

    ak894

    5,95

    High quality product to create a protective and very realistic glossy sheen to areas where applied. This product also serves as a protective layer for the paint underneath. Apply in the way you would with any varnish. Apply and let dry for a few minutes. This product can also serve as a perfect finishing touch for metallic paints such as AK Interactive Xtreme Metal. Apply Gauzy Agent to any single part or sections of your model that are begging for an incredible transparent shine. With self-leveling properties, it can be applied with brush or airbrush.

Current category:
-

Basics

basic products for scale modeling

No products were found matching your selection.

Navigation

MY CART

Close

No products in the cart.

No products in the cart.

COOKIES

AK Interactive uses cookies to give the best user experience. If you continue browsing, you are consenting to the acceptance of the aforementioned cookies and the acceptance of our cookies policy
Click on the link for more information. ACEPTAR

Aviso de cookies