| Weight | 0.4 kg |
|---|---|
| Dimensions | 20 × 15 × 10 cm |
| Brands | |
| Product | |
| Pack | Set |
| Theme | Civil, Fantasy, Figures, Sci-fi, Wargame |
| 3rd. Acrylic Color Range | General |
AK Points
PASTELS COLORS SET
Availability: In stock
15,60€
ENGLISH
ESPAÑOL
This set contains 6 acrylic paints, essential for applying pastel finishes to any figure or accessory.
These paints can be easily mixed with each other, allowing for the hassle-free creation of smooth transitions between lights and shadows. They can be applied by brush, taking advantage of the 3rd generation high coverage and adhesion.
When diluted with dedicated thinner, they can be airbrushed as easily as lacquer-based paints.
Matte finish.
The set contains:
- AK11037 PASTEL YELLOW
- AK11059 PASTEL PINK
- AK11069 PASTEL VIOLET
- AK11076 PASTEL PEACH
- AK11131 PASTEL GREEN
- AK11168 PASTEL BLUE
Este set contiene 6 pinturas acrílicas , esenciales para aplicar acabados pastel a cualquier figura o accesorio.
Estas pinturas se pueden mezclar fácilmente entre sí, lo que permite la creación de transiciones suaves entre luces y sombras sin problemas.
Se pueden aplicar con pincel, aprovechando la alta cobertura y adhesión de la fórmula tercera generación.
Diluidas se pueden aplicar con aerógrafo tan fácilmente como las pinturas a base de laca.
Acabado mate.
El conjunto contiene:
- AK11037 PASTEL YELLOW
- AK11059 PASTEL PINK
- AK11069 PASTEL VIOLET
- AK11076 PASTEL PEACH
- AK11131 PASTEL GREEN
- AK11168 PASTEL BLUE
Custom Tab Content here.
Tail sed sausage magna quis commodo swine. Aliquip strip steak esse ex in ham hock fugiat in. Labore velit pork belly eiusmod ut shank doner capicola consectetur landjaeger fugiat excepteur short loin. Pork belly laboris mollit in leberkas qui. Pariatur swine aliqua pork chop venison veniam. Venison sed cow short loin bresaola shoulder cupidatat capicola drumstick dolore magna shankle.
Tail sed sausage magna quis commodo swine. Aliquip strip steak esse ex in ham hock fugiat in. Labore velit pork belly eiusmod ut shank doner capicola consectetur landjaeger fugiat excepteur short loin. Pork belly laboris mollit in leberkas qui. Pariatur swine aliqua pork chop venison veniam. Venison sed cow short loin bresaola shoulder cupidatat capicola drumstick dolore magna shankle.
Other people also completed their order with these products
FA 614
18,95€
ENGLISH
ESPAÑOL
A set designed for thorough cleaning of any airbrush.
A glass jar with a plastic screw cap is used to purge the airbrush with the cleaner after each use. Thanks to a special filter in the upper part, all impurities and liquid remain in the container. Additionally, the lid is equipped with an airbrush stand.
Cleaners and rods are used to thoroughly clean various elements of airbrushes: tips, nozzles, bodies and other elements. The needle, on the other hand, cleans the inside of the airbrush nozzle or other internal parts of the airbrush, such as the needle guide channel.
Container Height: 85mm, diameter: 100mm.
Un conjunto diseñado para la limpieza a fondo de cualquier aerógrafo.
Se usa un frasco de vidrio con un tapón de rosca de plástico para purgar el aerógrafo con el limpiador después de cada uso. Gracias a un filtro especial en la parte superior, todas las impurezas y líquidos permanecen en el recipiente. Además, la tapa está equipada con un soporte para aerógrafo.
Los limpiadores y las varillas se utilizan para limpiar a fondo varios elementos de los aerógrafos: puntas, boquillas, cuerpos y otros elementos. La aguja, por otro lado, limpia el interior de la boquilla del aerógrafo u otras partes internas del aerógrafo, como el canal de guía de la aguja.
Altura del contenedor: 85 mm, diámetro: 100 mm.
MAGNET ULTRA RESISTANT CYANOCRYLATE GLUE
AK12015
7,60€
ENGLISH
ESPAÑOL
20g.
General-purpose cyanoacrylate 401. Fast drying, extra strong, low viscosity, specially formulated for adhesion between materials that can even have an acidic surface. Can be used with rubber, leather, wood, metal, resin and plastic. The surfaces to be joined must be free of dirt, dust and grease. A small amount of adhesive should be applied; more cyanoacrylate does not guarantee a better bond and makes more difficult the drying of the adhesive that is effective for bonding.
– 99% Cyano.
– Ethyl cyanoacrylate
– Use temperature: -55º to 120º
– Set time: between 3 and 10 seconds. The gaps and uneven surfaces can increase this setting time. It is not necessary to use clamps. Holding the pieces firmly for 10-30 seconds will ensure better adhesion.
– Definitive cure time: 24 h
– Viscosity: 110 mPa.S
– Shear strength: 21.0 MPa
* Bottles are not filled at a 100% to leave some air and make it work properly.
20g.
Cianoacrilato de uso general 401, secado rápido, extra fuerte, baja viscosidad especialmente formulado para la adhesión entre materiales que incluso pueden tener una superficie ácida. Se puede usar con caucho, cuero, madera, metal, resina y plástico. Las superficies a unir deben estar libres de suciedad, polvo y grasa. Se debe aplicar una pequeña cantidad de adhesivo; más cianoacrilato no garantiza una mejor unión y hace más difícil el secado del adhesivo que es efectivo para la unión.
– 99% Cyano
– Cianoacrilato de etilo
– Temperatura de uso: -55º a 120º
– Tiempo de fraguado: entre 3 y 10 segundos. Los huecos y las superficies irregulares pueden aumentar este tiempo de fraguado. No es necesario usar abrazaderas. Sostener las piezas firmemente durante 10-30 segundos asegurará una mejor adhesión.
– Tiempo de curado definitivo: 24 h.
– Viscosidad: 110 mPa.S
– Resistencia al corte: 21.0 MPa
*Las botellas no se llenan al 100% para dejar algo de aire y que funcione correctamente.
AK9009
9,90€Description language || Idioma de la descripción:
ENGLISH
Precision cutting pliers with an ergonomic handle covered with an orange non-slip vinyl foam, with a spring return.
They make a clean and precise cut. No need to touch up.
Suitable for parts or rods of plastic, PVC, resin or ABS less than 4mm.
Do not use to cut metal parts.
Alicates de corte de precisión con mango ergonómico cubierto con espuma de vinilo naranja, antideslizante y con muelle de retorno.
Realizan un corte limpio y preciso sin que sea necesario retocar.
Adecuado para piezas o varillas de plástico, PVC, resina o ABS menores de 4mm.
No utilizar para cortar piezas de metal.
AK050
5,90€Our odorless turpentine is very different from our white spirit. Besides being odorless, this product is softer and less aggressive than our White Spirit. This property of the odorless thinner (Turpentine) makes it great for delicate, soft and subtle blending. This thinner is exclusive to enamel and oil paint. This larger bottle gives you more thinner and costs less when compared to buying three 35ml bottles.
ABT114
6,50€For precision works is necessary to keep the tip of your brushes in a perfect state. This gel is indicated to keep the tip sharp and in perfect use condition with all brushes fibers compacted and never open or deformed. With this gel you will keep your brushes always like new ones after using and cleaning them (it can be used after the application of our ABT117 Magic Potion for Brushes or any other chemical or natural cleaner).
AK183
5,25€
ENGLISH
ESPAÑOL
A high quality ultra matte varnish which can be applied with a brush or an airbrush to achieve a dead flat finish on any surface.
Acrylic Ultra Matte Varnish formulated for maximum airbrush performance. Water soluble, odorless, and non-toxic. Shake before each use. We recommend AK-712 Acrylic Thinner for thinning. Dries completely in 12 hours.
60 ml.
Barniz ultra mate de alta calidad que puede ser aplicado con pincel o con aerógrafo para lograr un acabado plano en cualquier superficie.
Barniz ultra mate acrílico formulado para el máximo rendimiento del aerógrafo. Soluble en agua, inodoro y no tóxico. Agitar antes de cada uso. Recomendamos AK-712 Acrylic Thinner para diluir. Se seca completamente en 12 horas.
60 ml.
AK8064
12,75€The Wet Palette is a tool mainly used by figure painters, but more and more it is being used by people that paint with acrylics. It will extend the useful life of any acrylic so that it can be used for hours and once shut it will preserve the colors and color mixtures. It can be kept in the fridge.
It has three components:
1.Sponge, to hold large quantities of water, since it is quite thick.
2.Cloth made of fiber, placed on top of the sponge as a leveler, humidity filter, and as an interchangeable element in case of stains or if not used for a long time.
3.High quality special Paper, made of a fine silicone film, allows the transfer of humidity but prevents water forming and paints from dissolving, and does not give off any fibers not hairs when worked with the brushes.
The Wet Palette is watertight and airtight, made of the same material of marine containers for flares, charts, and medicines. Its locks guarantee the seal. This extends the life of paints, especially in Summer, hot climates, and under extreme conditions.
*Dimensions: 16 x 13 x 4 cm.
It contains:
?· Need more info? Click here
SURVIVAL WEATHERING BRUSHES SET
AK663
12,20€
ENGLISH
ESPAÑOL
An arsenal of brushes designed by the weathering experts here at AK. Top quality weathering products require the right tools to be applied; our Survival Weathering Brush set is the right set of tools you need. Contained in this set are the brushes needed to streak, chip, wash, and apply pigments plus much more.
Includes:
- AK-576
- AK-577
- AK-578
- AK-579
- AK-580
Un arsenal de pinceles diseñados por los expertos en weathering de AK. Los productos de weathering de alta calidad requieren la aplicación de las mismas con las herramientas adecuadas; nuestro juego de pinceles de supervivencia es el conjunto de herramientas adecuado que necesitas. En este juego se encuentran los pinceles necesarios para rayar, astillar, lavar y aplicar pigmentos y mucho más.
Incluye:
- AK-576
- AK-577
- AK-578
- AK-579
- AK-580
AK9204
6,50€ENGLISH Merchandising product.
Sport bottle.
Cruiser Aluminum Bottle 400ml – Black with White logo.
Aluminum. With carabiner. Capacity: 400 ml.
ESPAÑOL Producto de Merchandising.
Botella de deporte.
Botella Aluminio Cruiser 400ml – Negro con logo Blanco.
Aluminio. Con mosquetón. Capacidad: 400 ml.
AK11505
7,95€
ENGLISH
ESPAÑOL
- Volume: 250ml
- Cleaning solution designed for removing acrylics from brushes and airbrushes and to clean any tool.
- It can also function as a lubricant when you want to leave and rest your airbrush for a couple of hours and want to keep the needle clean.
- Special cap for a comfortable and controllable use.
ESPAÑOL
- Volumen: 250ml
- Solución de limpieza diseñada para eliminar acrílicos de pinceles y aerógrafos y para limpiar cualquier herramienta.
- También puede funcionar como lubricante cuando quieras dejar y descansar tu aerógrafo durante un par de horas y quieras mantener la aguja limpia.
- Tapón especial para un uso cómodo y controlable.
FA 614
18,95€
ENGLISH
ESPAÑOL
A set designed for thorough cleaning of any airbrush.
A glass jar with a plastic screw cap is used to purge the airbrush with the cleaner after each use. Thanks to a special filter in the upper part, all impurities and liquid remain in the container. Additionally, the lid is equipped with an airbrush stand.
Cleaners and rods are used to thoroughly clean various elements of airbrushes: tips, nozzles, bodies and other elements. The needle, on the other hand, cleans the inside of the airbrush nozzle or other internal parts of the airbrush, such as the needle guide channel.
Container Height: 85mm, diameter: 100mm.
Un conjunto diseñado para la limpieza a fondo de cualquier aerógrafo.
Se usa un frasco de vidrio con un tapón de rosca de plástico para purgar el aerógrafo con el limpiador después de cada uso. Gracias a un filtro especial en la parte superior, todas las impurezas y líquidos permanecen en el recipiente. Además, la tapa está equipada con un soporte para aerógrafo.
Los limpiadores y las varillas se utilizan para limpiar a fondo varios elementos de los aerógrafos: puntas, boquillas, cuerpos y otros elementos. La aguja, por otro lado, limpia el interior de la boquilla del aerógrafo u otras partes internas del aerógrafo, como el canal de guía de la aguja.
Altura del contenedor: 85 mm, diámetro: 100 mm.
MAGNET ULTRA RESISTANT CYANOCRYLATE GLUE
AK12015
7,60€
ENGLISH
ESPAÑOL
20g.
General-purpose cyanoacrylate 401. Fast drying, extra strong, low viscosity, specially formulated for adhesion between materials that can even have an acidic surface. Can be used with rubber, leather, wood, metal, resin and plastic. The surfaces to be joined must be free of dirt, dust and grease. A small amount of adhesive should be applied; more cyanoacrylate does not guarantee a better bond and makes more difficult the drying of the adhesive that is effective for bonding.
– 99% Cyano.
– Ethyl cyanoacrylate
– Use temperature: -55º to 120º
– Set time: between 3 and 10 seconds. The gaps and uneven surfaces can increase this setting time. It is not necessary to use clamps. Holding the pieces firmly for 10-30 seconds will ensure better adhesion.
– Definitive cure time: 24 h
– Viscosity: 110 mPa.S
– Shear strength: 21.0 MPa
* Bottles are not filled at a 100% to leave some air and make it work properly.
20g.
Cianoacrilato de uso general 401, secado rápido, extra fuerte, baja viscosidad especialmente formulado para la adhesión entre materiales que incluso pueden tener una superficie ácida. Se puede usar con caucho, cuero, madera, metal, resina y plástico. Las superficies a unir deben estar libres de suciedad, polvo y grasa. Se debe aplicar una pequeña cantidad de adhesivo; más cianoacrilato no garantiza una mejor unión y hace más difícil el secado del adhesivo que es efectivo para la unión.
– 99% Cyano
– Cianoacrilato de etilo
– Temperatura de uso: -55º a 120º
– Tiempo de fraguado: entre 3 y 10 segundos. Los huecos y las superficies irregulares pueden aumentar este tiempo de fraguado. No es necesario usar abrazaderas. Sostener las piezas firmemente durante 10-30 segundos asegurará una mejor adhesión.
– Tiempo de curado definitivo: 24 h.
– Viscosidad: 110 mPa.S
– Resistencia al corte: 21.0 MPa
*Las botellas no se llenan al 100% para dejar algo de aire y que funcione correctamente.
AK9009
9,90€Description language || Idioma de la descripción:
ENGLISH
Precision cutting pliers with an ergonomic handle covered with an orange non-slip vinyl foam, with a spring return.
They make a clean and precise cut. No need to touch up.
Suitable for parts or rods of plastic, PVC, resin or ABS less than 4mm.
Do not use to cut metal parts.
Alicates de corte de precisión con mango ergonómico cubierto con espuma de vinilo naranja, antideslizante y con muelle de retorno.
Realizan un corte limpio y preciso sin que sea necesario retocar.
Adecuado para piezas o varillas de plástico, PVC, resina o ABS menores de 4mm.
No utilizar para cortar piezas de metal.
AK050
5,90€Our odorless turpentine is very different from our white spirit. Besides being odorless, this product is softer and less aggressive than our White Spirit. This property of the odorless thinner (Turpentine) makes it great for delicate, soft and subtle blending. This thinner is exclusive to enamel and oil paint. This larger bottle gives you more thinner and costs less when compared to buying three 35ml bottles.
ABT114
6,50€For precision works is necessary to keep the tip of your brushes in a perfect state. This gel is indicated to keep the tip sharp and in perfect use condition with all brushes fibers compacted and never open or deformed. With this gel you will keep your brushes always like new ones after using and cleaning them (it can be used after the application of our ABT117 Magic Potion for Brushes or any other chemical or natural cleaner).
AK183
5,25€
ENGLISH
ESPAÑOL
A high quality ultra matte varnish which can be applied with a brush or an airbrush to achieve a dead flat finish on any surface.
Acrylic Ultra Matte Varnish formulated for maximum airbrush performance. Water soluble, odorless, and non-toxic. Shake before each use. We recommend AK-712 Acrylic Thinner for thinning. Dries completely in 12 hours.
60 ml.
Barniz ultra mate de alta calidad que puede ser aplicado con pincel o con aerógrafo para lograr un acabado plano en cualquier superficie.
Barniz ultra mate acrílico formulado para el máximo rendimiento del aerógrafo. Soluble en agua, inodoro y no tóxico. Agitar antes de cada uso. Recomendamos AK-712 Acrylic Thinner para diluir. Se seca completamente en 12 horas.
60 ml.
May be you are interested on
P705
6,60€Very soft thinner special for modelism in washes, filters, effects…
P409
5,75€Get real wet appearence and humidity effects on vehicles or dioramas.
EFFECTS:
Apply the effect using a fine sized round soft paintbrush. Work with the product onto your scale model in desired areas getting a slight sheen creating the appearance of dampness, moisture, and wetness. Let dry for about 15 minutes then clean the excess, if is needed, by using a brush dampened with Thinner for Washes. You can also use in verical lines like rain effects.
P701
5,75€Product to create the grimy appearance and accumulated dirt of well used engines
EFFECTS:
Apply the effect using a medium sized round soft paintbrush. Work with the product onto your scale model in desired areas like engines or mechanisms creating the grimy and accumulated dirt of well used engines appearance. Let dry for about 15 minutes then clean the excess if is needed by using a brush dampened with Thinner for Washes.
P307
5,75€If you want to go further on rust effects
WASH TECHNIQUE:
Apply the wash using a medium sized round soft paintbrush. Deposit the wash on to your scale model around details, seams and in holes creating fake shadows hi-lighting details. Let the wash dry for about 15 minutes then clean the excess using a brush dampened with Thinner for Washes. Use a fine pointy 00 size brush to apply more refined pin-washes where you feel they might be necessary such as in weld seams and around bolts and rivets.
P223
5,75€Starship wash Special SCIFI
WASH TECHNIQUE:
Apply the wash using a medium sized round soft paintbrush. Deposit the wash onto your scale model around details, seams and in holes creating fake shadows hi-lighting details. Let the wash dry for about 15 minutes then clean the excess using a brush dampened with Thinner for Washes. Use a fine pointy 00 size brush to apply more refined pin-washes where you feel they might be necessary such as in weld seams and around bolts and rivets
P281
5,75€General wash for high contrasts.
WASH TECHNIQUE:
Apply the wash using a medium sized round soft paintbrush. Deposit the wash on to your scale model around details, seams and in holes creating fake shadows hi-lighting details. Let the wash dry for about 15 minutes then clean the excess using a brush dampened with Thinner for Washes. Use a fine pointy 00 size brush to apply more refined pin-washes where you fou feel they might be necessary such as in weld seams and around bolts and rivets.
AK263
3,60€
ENGLISH
ESPAÑOL
Enamel Product.
This product allow us bring life to the details of the wood accessories of our vehicles and complements. This wash is specially designed to be applied over the light colors of the wood, or even dark to create deep and enhance the wood.
The basic technique used to weather any type of model is the wash, a classic technique that is still one of the most used techniques in modelling today. Apply the washes after shaking the bottle with a large brush to pick out details and creating shadows. The excess of the wash can be easily removed with a clean brush and White Spirit.
ESPAÑOL
Producto Esmalte.
Este producto ha sido especialmente desarrollado para ser aplicado sobre piezas pintadas en tonos marrones que simulan diferentes tipos de madera. El exceso de lavado se puede eliminar fácilmente con un pincel limpio y White Spirit.
Wash for Desert sand BASE (75ml)
P284
5,75€For all WWII and modern vehicles & aircrafts painted in sand yellow and desert camos
WASH TECHNIQUE:
Apply the wash using a medium sized round soft paintbrush. Deposit the wash onto your scale model around details, seams and in holes creating fake shadows hi-lighting details. Let the wash dry for about 15 minutes then clean the excess using a brush dampened with Thinner for Washes. Use a fine pointy 00 size brush to apply more refined pin-washes where you feel they might be necessary such as in weld seams and around bolts and rivets.
P411
5,75€To create realistic rust effects over all types of scale models
EFFECTS:
Apply the effects using a medium sized round soft paintbrush. Deposit the wash onto your scale model around details, seams and in holes creating fake shadows hi-lighting details. Let dry for about 15 minutes then clean the excess using a brush dampened with Thinner for Washes. Use a fine pointy 00 size brush to apply more refined pin-washes where you feel they might be necessary such as in weld seams and around bolts and rivets. The efect can be used in vertical lines to create streaking effects.
Acumulated Earth effect (75ml)
P300
5,75€This effect is special to imitate the accumulation of earth in vehicles
EFFECTS:
Apply the product by using a medium sized round soft paintbrush. Deposit onto your scale model around details, seams and in holes creating acumulated earth effects. Let the product dry for about 15 minutes then clean the excess using a brush dampened with Thinner for Washes. Use a fine pointy 00 size brush to apply more refined pin-washes where you feel they might be necessary such as in weld seams and around bolts, wheels, rivets or low parts. It also can be combined with plaster for more texture.
F420
3,25€Use on green colors.
With this filter you will be able to change subtle base coats.
*New formulated special purpose filter featuring fine suspended pigments for a perfect transparent effect.
FILTER TECHNIQUES: Apply the filter using a soft medium sized round paintbrush.Deposit the filter onto your scale model in areas where you want to alter the base tone. Let the filter dry for about 15 minutes. With this technique you will be able to fade, unify, and enrich the colors. You will also be able to tint the contrast between colors and get perfect transitions. Use each filter in the appropiate tone to get maximum efficient.
AK063
10,80€
ENGLISH
ESPAÑOL
This three color set is ideal to make slime and fuel effects in your scale models. This set will enable the modeler to recreate Slimy Grime in ships and boats, docks, old wooden items and LVTP vehicles. Also, this set includes a very useful color to make fuel stains that are very different than grease and oil effects.
This set contains:
- AK-025 Fuel Stains.
- AK-026 Slimy Grime Dark.
- AK-027 Slimy Grime Light.
ESPAÑOL
Este conjunto de tres colores es ideal para crear efectos de chorretones y combustible en sus modelos a escala. Este conjunto permitirá al modelador recrear chorretones en barcos y embarcaciones, muelles, artículos de madera viejos y vehículos LVTP. Además, este conjunto incluye un color muy útil para hacer manchas de combustible que son muy diferentes a los efectos de la grasa y el aceite.
Este conjunto contiene:
- AK-025 Fuel stains
- AK-026 Slimy Grime Dark.
- AK-027 Slimy Grime Light.
P705
6,60€Very soft thinner special for modelism in washes, filters, effects…
P409
5,75€Get real wet appearence and humidity effects on vehicles or dioramas.
EFFECTS:
Apply the effect using a fine sized round soft paintbrush. Work with the product onto your scale model in desired areas getting a slight sheen creating the appearance of dampness, moisture, and wetness. Let dry for about 15 minutes then clean the excess, if is needed, by using a brush dampened with Thinner for Washes. You can also use in verical lines like rain effects.
P701
5,75€Product to create the grimy appearance and accumulated dirt of well used engines
EFFECTS:
Apply the effect using a medium sized round soft paintbrush. Work with the product onto your scale model in desired areas like engines or mechanisms creating the grimy and accumulated dirt of well used engines appearance. Let dry for about 15 minutes then clean the excess if is needed by using a brush dampened with Thinner for Washes.
P307
5,75€If you want to go further on rust effects
WASH TECHNIQUE:
Apply the wash using a medium sized round soft paintbrush. Deposit the wash on to your scale model around details, seams and in holes creating fake shadows hi-lighting details. Let the wash dry for about 15 minutes then clean the excess using a brush dampened with Thinner for Washes. Use a fine pointy 00 size brush to apply more refined pin-washes where you feel they might be necessary such as in weld seams and around bolts and rivets.