Odourless Thinner

Acrylic Resin for use with pigments in model weathering. Mix with weathering pigments and plaster to add thick deep muddy effects to your model vehicles. This product will dry slowly and is hard to remove once set. It also can be used like glue although It is not white glue

Due to the great demand of our popular White Spirit, we have decided to also offer it in a new 100ml bottle. AK White Spirit is perfect for blending and streaking enamel and oil based paints.

High quality product developed to enhance, repair, and achieve extremely realistic transparent glass-like finishes on clear plastic parts. Simply dip and let dry for a few minutes. The bottle is think to dip parts without problem. Clean excess around the edges to achieve a uniform layer. For best results, allow product to dry in a dust-free environment. This product, when applied to clear plastic, will result in a realistic glass-like appearance on parts like clear plastic cockpit canopies or other clear parts.

Description language || Idioma de la descripción:

Liquid to adapt your decals to any surface. Wet the decal with the solution and a brush after place it. Leave for a few minutes, then with the help of the brush, adapt it to the surface to fully integrate it. With this product no decal will resist, no matter how complicated the surface be. And only with one product!

For precision works is necessary to keep the tip of your brushes in a perfect state. This gel is indicated to keep the tip sharp and in perfect use condition with all brushes fibers compacted and never open or deformed. With this gel you will keep your brushes always like new ones after using and cleaning them (it can be used after the application of our ABT117 Magic Potion for Brushes or any other chemical or natural cleaner).

Acrylic Matte Varnish formulated for maximum airbrush performance. Water soluble, odorless, and non-toxic. Shake before each use. We recommend AK-712 Acrylic Thinner for thinning. Dries completely in 12 hours.

Adhesive to fix down all kinds of earth, gravel, small stones, sand, etc to your bases. This special adhesive, with an alcohol base, is much more effective than the traditional white glue. The white glue tends to leave a plastic finish over the surface giving an unreal aspect and also tends not to expand well through the material. But this new adhesive expands rapidly and is adsorbed by the stones and sand saving a lot of time when fixing down rubble for example. This product is easily cleaned using alcohol, can be applied using an airbrush or paint brush and the drying process can be accelerated with a hairdryer or any other type of heat source. Although it’s matt when it dries, on smooth surfaces it can leave a light satin mark, however, this can be removed with a matt varnish.
Original product of AK-interactive, don’t choose copies.

Acrylic Glossy Varnish formulated for maximum airbrush performance. Water soluble, odorless, and non-toxic. Shake before each use. We recommend AK-712 Acrylic Thinner for thinning. Dries completely in 12 hours.

A must have product for any modeler who wants to add volume to their mud and soil mixtures whether is for a diorama or to be splashed on to their vehicle. Mix the plaster in with any of our high quality Nature Effects line of different types of mud, earth, dust and soil. The combinations are endless. If your mixture is too thick you can dilute it with white spirit. If is too thin, add more plaster. Either paint your mixture on to your diorama or load a paint brush with your mixture and using your airbrush, blow short bursts of air at the brush to recreate splatters.