Weight | 0.42 kg |
---|---|
Dimensions | 10 × 10 × 10 cm |
Brands | |
Product | |
Pack | Single |
Volumen | 400ml |
Theme | General purpose |
P.P.P | Yes |
AK Points
10,95€
*Service Web: Península Ibérica.
*Rest of countries, available in the best Modelling shops!
400 ml – Includes a standard diffuser & fine diffuser.
High Quality Varnish to get an amazing Gloss varnish with a non-yellowing stability. Ultra resistant and with the best adherence. Before using you will need to shake the spray well, at least a minute to get a good mixture. Paint with the can in vertical position in fast and thin coats at a distance of about 25 cm., allowing to dry for 5 minutes be- tween layers. At the end of the painting turn the can upside down holding the spray nozzle for a few seconds in this position, until no more paint comes out of the diffuser, thus avoiding the obstruction of the diffuser.
Weight | 0.42 kg |
---|---|
Dimensions | 10 × 10 × 10 cm |
Brands | |
Product | |
Pack | Single |
Volumen | 400ml |
Theme | General purpose |
P.P.P | Yes |
ABT114
6,50€For precision works is necessary to keep the tip of your brushes in a perfect state. This gel is indicated to keep the tip sharp and in perfect use condition with all brushes fibers compacted and never open or deformed. With this gel you will keep your brushes always like new ones after using and cleaning them (it can be used after the application of our ABT117 Magic Potion for Brushes or any other chemical or natural cleaner).
TOP LINE DELUXE Marta Kolinsky KIT
ABT850
71,95€AK8064
12,75€The Wet Palette is a tool mainly used by figure painters, but more and more it is being used by people that paint with acrylics. It will extend the useful life of any acrylic so that it can be used for hours and once shut it will preserve the colors and color mixtures. It can be kept in the fridge.
It has three components:
1.Sponge, to hold large quantities of water, since it is quite thick.
2.Cloth made of fiber, placed on top of the sponge as a leveler, humidity filter, and as an interchangeable element in case of stains or if not used for a long time.
3.High quality special Paper, made of a fine silicone film, allows the transfer of humidity but prevents water forming and paints from dissolving, and does not give off any fibers not hairs when worked with the brushes.
The Wet Palette is watertight and airtight, made of the same material of marine containers for flares, charts, and medicines. Its locks guarantee the seal. This extends the life of paints, especially in Summer, hot climates, and under extreme conditions.
*Dimensions: 16 x 13 x 4 cm.
It contains:
?· Need more info? Click here
FA 614
18,95€A set designed for thorough cleaning of any airbrush.
A glass jar with a plastic screw cap is used to purge the airbrush with the cleaner after each use. Thanks to a special filter in the upper part, all impurities and liquid remain in the container. Additionally, the lid is equipped with an airbrush stand.
Cleaners and rods are used to thoroughly clean various elements of airbrushes: tips, nozzles, bodies and other elements. The needle, on the other hand, cleans the inside of the airbrush nozzle or other internal parts of the airbrush, such as the needle guide channel.
Container Height: 85mm, diameter: 100mm.
Un conjunto diseñado para la limpieza a fondo de cualquier aerógrafo.
Se usa un frasco de vidrio con un tapón de rosca de plástico para purgar el aerógrafo con el limpiador después de cada uso. Gracias a un filtro especial en la parte superior, todas las impurezas y líquidos permanecen en el recipiente. Además, la tapa está equipada con un soporte para aerógrafo.
Los limpiadores y las varillas se utilizan para limpiar a fondo varios elementos de los aerógrafos: puntas, boquillas, cuerpos y otros elementos. La aguja, por otro lado, limpia el interior de la boquilla del aerógrafo u otras partes internas del aerógrafo, como el canal de guía de la aguja.
Altura del contenedor: 85 mm, diámetro: 100 mm.
AK11505
7,95€
MAGNET ULTRA RESISTANT CYANOCRYLATE GLUE
AK12015
7,60€20g.
General-purpose cyanoacrylate 401. Fast drying, extra strong, low viscosity, specially formulated for adhesion between materials that can even have an acidic surface. Can be used with rubber, leather, wood, metal, resin and plastic. The surfaces to be joined must be free of dirt, dust and grease. A small amount of adhesive should be applied; more cyanoacrylate does not guarantee a better bond and makes more difficult the drying of the adhesive that is effective for bonding.
– 99% Cyano.
– Ethyl cyanoacrylate
– Use temperature: -55º to 120º
– Set time: between 3 and 10 seconds. The gaps and uneven surfaces can increase this setting time. It is not necessary to use clamps. Holding the pieces firmly for 10-30 seconds will ensure better adhesion.
– Definitive cure time: 24 h
– Viscosity: 110 mPa.S
– Shear strength: 21.0 MPa
* Bottles are not filled at a 100% to leave some air and make it work properly.
20g.
Cianoacrilato de uso general 401, secado rápido, extra fuerte, baja viscosidad especialmente formulado para la adhesión entre materiales que incluso pueden tener una superficie ácida. Se puede usar con caucho, cuero, madera, metal, resina y plástico. Las superficies a unir deben estar libres de suciedad, polvo y grasa. Se debe aplicar una pequeña cantidad de adhesivo; más cianoacrilato no garantiza una mejor unión y hace más difícil el secado del adhesivo que es efectivo para la unión.
– 99% Cyano
– Cianoacrilato de etilo
– Temperatura de uso: -55º a 120º
– Tiempo de fraguado: entre 3 y 10 segundos. Los huecos y las superficies irregulares pueden aumentar este tiempo de fraguado. No es necesario usar abrazaderas. Sostener las piezas firmemente durante 10-30 segundos asegurará una mejor adhesión.
– Tiempo de curado definitivo: 24 h.
– Viscosidad: 110 mPa.S
– Resistencia al corte: 21.0 MPa
*Las botellas no se llenan al 100% para dejar algo de aire y que funcione correctamente.
AK050
5,90€Our odorless turpentine is very different from our white spirit. Besides being odorless, this product is softer and less aggressive than our White Spirit. This property of the odorless thinner (Turpentine) makes it great for delicate, soft and subtle blending. This thinner is exclusive to enamel and oil paint. This larger bottle gives you more thinner and costs less when compared to buying three 35ml bottles.
AK9009
9,90€Description language || Idioma de la descripción:
ENGLISH
Precision cutting pliers with an ergonomic handle covered with an orange non-slip vinyl foam, with a spring return.
They make a clean and precise cut. No need to touch up.
Suitable for parts or rods of plastic, PVC, resin or ABS less than 4mm.
Do not use to cut metal parts.
Alicates de corte de precisión con mango ergonómico cubierto con espuma de vinilo naranja, antideslizante y con muelle de retorno.
Realizan un corte limpio y preciso sin que sea necesario retocar.
Adecuado para piezas o varillas de plástico, PVC, resina o ABS menores de 4mm.
No utilizar para cortar piezas de metal.
AK183
5,25€A high quality ultra matte varnish which can be applied with a brush or an airbrush to achieve a dead flat finish on any surface.
Acrylic Ultra Matte Varnish formulated for maximum airbrush performance. Water soluble, odorless, and non-toxic. Shake before each use. We recommend AK-712 Acrylic Thinner for thinning. Dries completely in 12 hours.
60 ml.
Barniz ultra mate de alta calidad que puede ser aplicado con pincel o con aerógrafo para lograr un acabado plano en cualquier superficie.
Barniz ultra mate acrílico formulado para el máximo rendimiento del aerógrafo. Soluble en agua, inodoro y no tóxico. Agitar antes de cada uso. Recomendamos AK-712 Acrylic Thinner para diluir. Se seca completamente en 12 horas.
60 ml.
AK12004
4,95€40 ml.
Special square anti rolling base.
Ultra-thin precision maxoma fiber brush.
1. Special density.
2. Glue by capillary action, quick drying.
The Extra Thin Citrus Cement glues by capillary action with a medium / fast drying time, and has a mild citrus aroma. It is undoubtedly the best option for general assembly work. Great performance with the perfect viscosity for plastic modeling.
*Same characteristics as our AK12002 Extra Thin Cement but with an aromatic touch.
40 ml.
Base especial antivuelco cuadrada.
Pincel de fibra maxoma de precisión ultrafina.
1. Densidad especial.
2. Pegamento por capilaridad, uniones muy rápidas.
El Extra Fino Cítrico tiene las características del pegamento extra fino pero con un aroma cítrico suave. Para pegar por capilaridad con un tiempo de secado medio / rápido, es sin duda la mejor opción para el trabajo de montaje general. Gran rendimiento con la viscosidad perfecta para modelar plástico.
*Las mismas características que nuestro AK12002 Extra Thin Cement pero con un toque aromático.
ABT114
6,50€For precision works is necessary to keep the tip of your brushes in a perfect state. This gel is indicated to keep the tip sharp and in perfect use condition with all brushes fibers compacted and never open or deformed. With this gel you will keep your brushes always like new ones after using and cleaning them (it can be used after the application of our ABT117 Magic Potion for Brushes or any other chemical or natural cleaner).
TOP LINE DELUXE Marta Kolinsky KIT
ABT850
71,95€AK8064
12,75€The Wet Palette is a tool mainly used by figure painters, but more and more it is being used by people that paint with acrylics. It will extend the useful life of any acrylic so that it can be used for hours and once shut it will preserve the colors and color mixtures. It can be kept in the fridge.
It has three components:
1.Sponge, to hold large quantities of water, since it is quite thick.
2.Cloth made of fiber, placed on top of the sponge as a leveler, humidity filter, and as an interchangeable element in case of stains or if not used for a long time.
3.High quality special Paper, made of a fine silicone film, allows the transfer of humidity but prevents water forming and paints from dissolving, and does not give off any fibers not hairs when worked with the brushes.
The Wet Palette is watertight and airtight, made of the same material of marine containers for flares, charts, and medicines. Its locks guarantee the seal. This extends the life of paints, especially in Summer, hot climates, and under extreme conditions.
*Dimensions: 16 x 13 x 4 cm.
It contains:
?· Need more info? Click here
FA 614
18,95€A set designed for thorough cleaning of any airbrush.
A glass jar with a plastic screw cap is used to purge the airbrush with the cleaner after each use. Thanks to a special filter in the upper part, all impurities and liquid remain in the container. Additionally, the lid is equipped with an airbrush stand.
Cleaners and rods are used to thoroughly clean various elements of airbrushes: tips, nozzles, bodies and other elements. The needle, on the other hand, cleans the inside of the airbrush nozzle or other internal parts of the airbrush, such as the needle guide channel.
Container Height: 85mm, diameter: 100mm.
Un conjunto diseñado para la limpieza a fondo de cualquier aerógrafo.
Se usa un frasco de vidrio con un tapón de rosca de plástico para purgar el aerógrafo con el limpiador después de cada uso. Gracias a un filtro especial en la parte superior, todas las impurezas y líquidos permanecen en el recipiente. Además, la tapa está equipada con un soporte para aerógrafo.
Los limpiadores y las varillas se utilizan para limpiar a fondo varios elementos de los aerógrafos: puntas, boquillas, cuerpos y otros elementos. La aguja, por otro lado, limpia el interior de la boquilla del aerógrafo u otras partes internas del aerógrafo, como el canal de guía de la aguja.
Altura del contenedor: 85 mm, diámetro: 100 mm.
AK11505
7,95€
MAGNET ULTRA RESISTANT CYANOCRYLATE GLUE
AK12015
7,60€20g.
General-purpose cyanoacrylate 401. Fast drying, extra strong, low viscosity, specially formulated for adhesion between materials that can even have an acidic surface. Can be used with rubber, leather, wood, metal, resin and plastic. The surfaces to be joined must be free of dirt, dust and grease. A small amount of adhesive should be applied; more cyanoacrylate does not guarantee a better bond and makes more difficult the drying of the adhesive that is effective for bonding.
– 99% Cyano.
– Ethyl cyanoacrylate
– Use temperature: -55º to 120º
– Set time: between 3 and 10 seconds. The gaps and uneven surfaces can increase this setting time. It is not necessary to use clamps. Holding the pieces firmly for 10-30 seconds will ensure better adhesion.
– Definitive cure time: 24 h
– Viscosity: 110 mPa.S
– Shear strength: 21.0 MPa
* Bottles are not filled at a 100% to leave some air and make it work properly.
20g.
Cianoacrilato de uso general 401, secado rápido, extra fuerte, baja viscosidad especialmente formulado para la adhesión entre materiales que incluso pueden tener una superficie ácida. Se puede usar con caucho, cuero, madera, metal, resina y plástico. Las superficies a unir deben estar libres de suciedad, polvo y grasa. Se debe aplicar una pequeña cantidad de adhesivo; más cianoacrilato no garantiza una mejor unión y hace más difícil el secado del adhesivo que es efectivo para la unión.
– 99% Cyano
– Cianoacrilato de etilo
– Temperatura de uso: -55º a 120º
– Tiempo de fraguado: entre 3 y 10 segundos. Los huecos y las superficies irregulares pueden aumentar este tiempo de fraguado. No es necesario usar abrazaderas. Sostener las piezas firmemente durante 10-30 segundos asegurará una mejor adhesión.
– Tiempo de curado definitivo: 24 h.
– Viscosidad: 110 mPa.S
– Resistencia al corte: 21.0 MPa
*Las botellas no se llenan al 100% para dejar algo de aire y que funcione correctamente.
AK1010
10,95€*Service Web: Península Ibérica.
*Rest of countries, available in the best Modelling shops!
400 ml – Includes a standard diffuser & fine diffuser.
Easy to apply, the primer of plastic models will become simple and more effective. This primer has excellent coverage and is recommended for use prior to painting. Works on plastic or metal. These cans of spray paint are extremely useful for painting large or small surfaces. The paint is a synthetic lacquer that cures in a short period of time.
AK spray paints are not affected by acrylic, enamel paints or extreme weathering. Ultra resistant and with the best adherence. Before using you will need to shake the spray well, at least a minute to get a good mixture.
AK1009
10,95€*Service Web: Península Ibérica.
*Rest of countries, available in the best Modelling shops!
400 ml – Includes a standard diffuser & fine diffuser.
Easy to apply, the primer of plastic models will become simple and more effective. This primer has excellent coverage and is recommended for use prior to painting. Works on plastic or metal. These cans of spray paint are extremely useful for painting large or small surfaces. The paint is a synthetic lacquer that cures in a short period of time.
AK spray paints are not affected by acrylic, enamel paints or extreme weathering. Ultra resistant and with the best adherence. Before using you will need to shake the spray well, at least a minute to get a good mixture.
AK1054
10,95€*Service Web: Península Ibérica.
*Rest of countries, available in the best Modelling shops!
400 ml.
Your demon army will look flawless, just like any red armor or dragon. You can also paint orc vehicles because “red go fasta WAAAGH!”.
*Servicio Web: Península Ibérica.
*Resto de Paises, disponible en las mejores tiendas de Modelismo!
400 ml.
La línea de Sprays Wargame de AK está indicada para una rápida y eficaz imprimación de tus miniaturas. Cada color, además de actuar como capa de imprimación, funciona como capa base
para pintar tus ejércitos. La pintura es altamente resistente para poder manipular tus figuras sin problemas, así como para facilitar la adhesión de las siguientes capas de efectos o pintura
sobre las mismas. Los sprays contienen 400ml e incluyen dos boquillas de pulverización: estándar y fina.
Tu ejército de demonios quedará impecable, al igual que cualquier armadura roja o dragón. También puedes pintar los vehículos orcos porque “el rojo corre maz WAAAAAGH!”.
AK1028
2,40€With these diffusers, specially indicated for modelling, you can adapt the spraycans to be used for a speci c job, changing the spray diffusers to obtain differnt paint ows, vertical strokes, more pressure…
Together with these complements you will discover new possibilities in the spraycan painting technique.
AK1014
10,95€*Service Web: Península Ibérica.
*Rest of countries, available in the best Modelling shops!
400 ml – Includes a standard diffuser & fine diffuser.
High Quality Varnish to get an amazing satin varnish with a non-yellowing stability. Ultra resistant and with the best adherence. Before using you will need to shake the spray well, at least a minute to get a good mixture. Paint with the can in vertical position in fast and thin coats at a distance of about 25 cm., allowing to dry for 5 minutes between layers. At the end of the painting turn the can upside down holding the spray nozzle for a few seconds in this position, until no more paint comes out of the diffuser, thus avoiding the obstruction of the diffuser.
AK062
10,80€This weathering set contains three different colors to make streaking effects on your scale models. These streaking effects colors are very versatile in the sense that these colors can be diluted down to the level of washes. This multiuse weathering set is a must have for anyone who strives for realistically weathered models.
This set contains:
_ AK-012 Streaking Grime.
_ AK-013 Rust Streaks.
_ AK-014 Winter Streaking Grime.
AK1011
10,95€*Service Web: Península Ibérica.
*Rest of countries, available in the best Modelling shops!
400 ml – Includes a standard diffuser & fine diffuser.
Easy to apply, the primer of plastic models will become simple and more effective. This primer has excellent coverage and is recommended for use prior to painting. Works on plastic or metal. These cans of spray paint are extremely useful for painting large or small surfaces. The paint is a synthetic lacquer that cures in a short period of time.
AK spray paints are not affected by acrylic, enamel paints or extreme weathering. Ultra resistant and with the best adherence. Before using you will need to shake the spray well, at least a minute to get a good mixture.
AK1059
10,95€*Service Web: Península Ibérica.
*Rest of countries, available in the best Modelling shops!
400 ml.
Great for quickly painting your army, no matter if it is armor, dragon or reptile.
This color will save you time and you will get a perfect turquoise base.
*Servicio Web: Península Ibérica.
*Resto de Paises, disponible en las mejores tiendas de Modelismo!
400 ml.
La línea de Sprays Wargame de AK está indicada para una rápida y eficaz imprimación de tus miniaturas. Cada color, además de actuar como capa de imprimación, funciona como capa base
para pintar tus ejércitos. La pintura es altamente resistente para poder manipular tus figuras sin problemas, así como para facilitar la adhesión de las siguientes capas de efectos o pintura
sobre las mismas. Los sprays contienen 400ml e incluyen dos boquillas de pulverización: estándar y fina.
Genial para pintar rápidamente tu ejército, ya sean armaduras, dragones o reptiles.
Este color te ahorrará mucho tiempo y obtendrás una base turquesa perfecta.
AK1029
2,40€With these diffusers, specially indicated for modelling, you can adapt the spraycans to be used for a speci c job, changing the spray diffusers to obtain differnt paint ows, vertical strokes, more pressure…
Together with these complements you will discover new possibilities in the spraycan painting technique.
AK1017
6,95€*Service Web: Península Ibérica.
*Rest of countries, available in the best Modelling shops!
150 ml.
Product in spray with a grey tone special for priming resin parts featuring a high opacity once dry. This spray primer can be applied directly on resin, is ul- tra-resistant and with the best adherence.
Clean and degrease the resin parts to be painted. The paint is a synthetic lacquer that cures in a short period of time. Easy to apply, the primer of resin parts will be- come simple and more effective.
Before using you will need to shake the spray well, at least a minute to get a good mixture. Paint with the can in vertical position in fast and thin coats at a distance of about 25 cm., allowing to dry for 5 minutes between layers. At the end of the painting turn the can upside down holding the spray nozzle for a few seconds in this position, until no more paint comes out of the dif- fuser, thus avoiding the obstruction of the diffuser.
AK1055
10,95€*Service Web: Península Ibérica.
*Rest of countries, available in the best Modelling shops!
400 ml.
Quickly paint your vehicles, armor or scenery, or take advantage of this primer on miniatures with warm colors that need a strong base to maintain the color.
*Servicio Web: Península Ibérica.
*Resto de Paises, disponible en las mejores tiendas de Modelismo!
400 ml.
La línea de Sprays Wargame de AK está indicada para una rápida y eficaz imprimación de tus miniaturas. Cada color, además de actuar como capa de imprimación, funciona como capa base
para pintar tus ejércitos. La pintura es altamente resistente para poder manipular tus figuras sin problemas, así como para facilitar la adhesión de las siguientes capas de efectos o pintura
sobre las mismas. Los sprays contienen 400ml e incluyen dos boquillas de pulverización: estándar y fina.
Pinta rápidamente tus vehículos, armaduras o escenografía, o aprovecha esta imprimación en miniaturas con colores cálidos que necesiten una base potente para mantener el color.
AK1057
10,95€*Service Web: Península Ibérica.
*Rest of countries, available in the best Modelling shops!
400 ml.
Your scenery will look perfect with this brown color and you will save a lot of work if you use it for trees, old armor or even skin.
*Servicio Web: Península Ibérica.
*Resto de Paises, disponible en las mejores tiendas de Modelismo!
400 ml.
La línea de Sprays Wargame de AK está indicada para una rápida y eficaz imprimación de tus miniaturas. Cada color, además de actuar como capa de imprimación, funciona como capa base
para pintar tus ejércitos. La pintura es altamente resistente para poder manipular tus figuras sin problemas, así como para facilitar la adhesión de las siguientes capas de efectos o pintura
sobre las mismas. Los sprays contienen 400ml e incluyen dos boquillas de pulverización: estándar y fina.
Tu escenografía quedará perfecta con este color marrón y ahorrarás mucho trabajo si lo empleas para árboles, armaduras viejas o incluso pieles.
AK1010
10,95€*Service Web: Península Ibérica.
*Rest of countries, available in the best Modelling shops!
400 ml – Includes a standard diffuser & fine diffuser.
Easy to apply, the primer of plastic models will become simple and more effective. This primer has excellent coverage and is recommended for use prior to painting. Works on plastic or metal. These cans of spray paint are extremely useful for painting large or small surfaces. The paint is a synthetic lacquer that cures in a short period of time.
AK spray paints are not affected by acrylic, enamel paints or extreme weathering. Ultra resistant and with the best adherence. Before using you will need to shake the spray well, at least a minute to get a good mixture.
AK1009
10,95€*Service Web: Península Ibérica.
*Rest of countries, available in the best Modelling shops!
400 ml – Includes a standard diffuser & fine diffuser.
Easy to apply, the primer of plastic models will become simple and more effective. This primer has excellent coverage and is recommended for use prior to painting. Works on plastic or metal. These cans of spray paint are extremely useful for painting large or small surfaces. The paint is a synthetic lacquer that cures in a short period of time.
AK spray paints are not affected by acrylic, enamel paints or extreme weathering. Ultra resistant and with the best adherence. Before using you will need to shake the spray well, at least a minute to get a good mixture.
AK1054
10,95€*Service Web: Península Ibérica.
*Rest of countries, available in the best Modelling shops!
400 ml.
Your demon army will look flawless, just like any red armor or dragon. You can also paint orc vehicles because “red go fasta WAAAGH!”.
*Servicio Web: Península Ibérica.
*Resto de Paises, disponible en las mejores tiendas de Modelismo!
400 ml.
La línea de Sprays Wargame de AK está indicada para una rápida y eficaz imprimación de tus miniaturas. Cada color, además de actuar como capa de imprimación, funciona como capa base
para pintar tus ejércitos. La pintura es altamente resistente para poder manipular tus figuras sin problemas, así como para facilitar la adhesión de las siguientes capas de efectos o pintura
sobre las mismas. Los sprays contienen 400ml e incluyen dos boquillas de pulverización: estándar y fina.
Tu ejército de demonios quedará impecable, al igual que cualquier armadura roja o dragón. También puedes pintar los vehículos orcos porque “el rojo corre maz WAAAAAGH!”.
AK1028
2,40€With these diffusers, specially indicated for modelling, you can adapt the spraycans to be used for a speci c job, changing the spray diffusers to obtain differnt paint ows, vertical strokes, more pressure…
Together with these complements you will discover new possibilities in the spraycan painting technique.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.