Weight | 0.18 kg |
---|---|
Dimensions | 10 × 10 × 10 cm |
Brands | |
Pack | Set |
Volumen | 60ml |
Paint Finish | Matte, Satin |
7,60€
Set of 10 caps with conical shape of 24mm diameter, with an alternative design so that you can exchange them for the original ones of the DUAL EXO range if you prefer.
Set compuesto por 10 tapones con forma cónica de 24mm de diámetro, con un diseño alternativo para que puedas intercambiarlo por los originales de la gama DUAL EXO si lo prefieres.
Weight | 0.18 kg |
---|---|
Dimensions | 10 × 10 × 10 cm |
Brands | |
Pack | Set |
Volumen | 60ml |
Paint Finish | Matte, Satin |
MAGNET ULTRA RESISTANT CYANOCRYLATE GLUE
AK12015
7,60€Contains: 20g.
General-purpose cyanoacrylate 401. Fast drying, extra strong, low viscosity, specially formulated for adhesion between materials that can even have an acidic surface. Can be used with rubber, leather, wood, metal, resin and plastic. The surfaces to be joined must be free of dirt, dust and grease. A small amount of adhesive should be applied; more cyanoacrylate does not guarantee a better bond and makes more difficult the drying of the adhesive that is effective for bonding.
– 99% Cyano.
– Ethyl cyanoacrylate
– Use temperature: -55º to 120º
– Set time: between 3 and 10 seconds. The gaps and uneven surfaces can increase this setting time. It is not necessary to use clamps. Holding the pieces firmly for 10-30 seconds will ensure better adhesion.
– Definitive cure time: 24 h
– Viscosity: 110 mPa.S
– Shear strength: 21.0 MPa
* Bottles are not filled at a 100% to leave some air and make it work properly.
** Download here a technical sheet on how to use it.
Contiene: 20g.
Cianoacrilato de uso general 401, secado rápido, extra fuerte, baja viscosidad especialmente formulado para la adhesión entre materiales que incluso pueden tener una superficie ácida. Se puede usar con caucho, cuero, madera, metal, resina y plástico. Las superficies a unir deben estar libres de suciedad, polvo y grasa. Se debe aplicar una pequeña cantidad de adhesivo; más cianoacrilato no garantiza una mejor unión y hace más difÃcil el secado del adhesivo que es efectivo para la unión.
– 99% Cyano
– Cianoacrilato de etilo
– Temperatura de uso: -55º a 120º
– Tiempo de fraguado: entre 3 y 10 segundos. Los huecos y las superficies irregulares pueden aumentar este tiempo de fraguado. No es necesario usar abrazaderas. Sostener las piezas firmemente durante 10-30 segundos asegurará una mejor adhesión.
– Tiempo de curado definitivo: 24 h.
– Viscosidad: 110 mPa.S
– Resistencia al corte: 21.0 MPa
*Las botellas no se llenan al 100% para dejar algo de aire y que funcione correctamente.
** Descargue aquà una ficha técnica sobre cómo utilizarlo.
AK11505
7,95€
MAGNET ULTRA RESISTANT CYANOCRYLATE GLUE
AK12015
7,60€Contains: 20g.
General-purpose cyanoacrylate 401. Fast drying, extra strong, low viscosity, specially formulated for adhesion between materials that can even have an acidic surface. Can be used with rubber, leather, wood, metal, resin and plastic. The surfaces to be joined must be free of dirt, dust and grease. A small amount of adhesive should be applied; more cyanoacrylate does not guarantee a better bond and makes more difficult the drying of the adhesive that is effective for bonding.
– 99% Cyano.
– Ethyl cyanoacrylate
– Use temperature: -55º to 120º
– Set time: between 3 and 10 seconds. The gaps and uneven surfaces can increase this setting time. It is not necessary to use clamps. Holding the pieces firmly for 10-30 seconds will ensure better adhesion.
– Definitive cure time: 24 h
– Viscosity: 110 mPa.S
– Shear strength: 21.0 MPa
* Bottles are not filled at a 100% to leave some air and make it work properly.
** Download here a technical sheet on how to use it.
Contiene: 20g.
Cianoacrilato de uso general 401, secado rápido, extra fuerte, baja viscosidad especialmente formulado para la adhesión entre materiales que incluso pueden tener una superficie ácida. Se puede usar con caucho, cuero, madera, metal, resina y plástico. Las superficies a unir deben estar libres de suciedad, polvo y grasa. Se debe aplicar una pequeña cantidad de adhesivo; más cianoacrilato no garantiza una mejor unión y hace más difÃcil el secado del adhesivo que es efectivo para la unión.
– 99% Cyano
– Cianoacrilato de etilo
– Temperatura de uso: -55º a 120º
– Tiempo de fraguado: entre 3 y 10 segundos. Los huecos y las superficies irregulares pueden aumentar este tiempo de fraguado. No es necesario usar abrazaderas. Sostener las piezas firmemente durante 10-30 segundos asegurará una mejor adhesión.
– Tiempo de curado definitivo: 24 h.
– Viscosidad: 110 mPa.S
– Resistencia al corte: 21.0 MPa
*Las botellas no se llenan al 100% para dejar algo de aire y que funcione correctamente.
** Descargue aquà una ficha técnica sobre cómo utilizarlo.
AK11505
7,95€
AK083
3,75€Enamel Product.
The perfect color to apply on tank tracks, however it can used to do any type of rusting metal effects. The basic technique used to weather any type of model is the wash, a classic technique that is still one of the most used techniques in modelling today. Apply the washes after shaking the bottle with a large brush to pick out details and creating shadows.
The excess of the wash can be easily removed with a clean brush and White Spirit.
Producto Esmalte.
El color perfecto para aplicar sobre las orugas de tanques, además, gracias a su tonalidad oscura puede usarse para hacer efectos oxidados en cualquier tipo de partes metálicas.
Puede combinarse con AK046 para conseguir efectos de óxido realistas en vehÃculos abandonados.
Aplique el lavado con un pincel de punta redonda y de tamaño mediano. Deposite el lavado en su maqueta alrededor de los detalles, los volúmenes y los paneles para resaltar los detalles. Deje que el lavado seque durante aproximadamente 15 minutos y luego limpie el exceso con un pincel humedecido con White Spirit. Use un pincel de punta fina y tamaño pequeño para aplicar lavados más precisos donde crea que puedan ser necesarios, tal como costuras de soldadura y alrededor de pernos y remaches.
P409
EFFECTS:
Apply the effects using a medium sized round soft paintbrush. Deposit the wash onto your scale model around details, seams and in holes creating fake shadows hi-lighting details. Let dry for about 15 minutes then clean the excess using a brush dampened with Thinner for Washes. Use a fine pointy 00 size brush to apply more refined pin-washes where you feel they might be necessary such as in weld seams and around bolts and rivets.
The efect can be used in vertical lines to create streaking effects.
Este producto crea una apariencia de humedad en las superficies. La fórmula de este producto simula con gran realismo multitud de efectos que pueden verse en cualquier vehÃculo. No es un barniz brillante, este producto ha sido especialmente diseñado para realizar este tipo de efectos, ofreciendo diferentes intensidades de brillo dependiendo de la superficie.
Agitar bien antes de usar. Puedes aplicarlo sobre tu vehÃculo o en una zona que necesites aparezca húmeda y después puedes trabajarlo con un pincel y un poco de White Spirit.
AK063
11,25€This three color set is ideal to make slime and fuel effects in your scale models. This set will enable the modeler to recreate Slimy Grime in ships and boats, docks, old wooden items and LVTP vehicles. Also, this set includes a very useful color to make fuel stains that are very different than grease and oil effects.
This set contains:
Este set de tres colores es ideal para crear efectos de chorretones y derrames de combustible. También incluye dos productos para recrear chorretones de humedad verdosa y algas en barcos y embarcaciones, muelles, artÃculos de madera viejos, escenas, vehÃculos LVTP, etc.
Este conjunto contiene:
AK556
11,25€Special set to make weathering effects in ships for all scales, army’s even civil ships.
This set contains:
Set especial para hacer efectos de weathering en los barcos de todas las escalas, ejércitos e incluso en barcos civiles.
Este set contiene:
OIF & OEF – US Vehicles Weathering Set
AK120
10,25€The modern American vehicles in Afghanistan and Iraq are becoming a theme that is just as important as the German vehicles from WWII. Many brands of plastic kits are now inclined to produce vehicles from these two theatres of operations, OIF and OEF. This set has been exclusively designed for modelers that make these types of vehicles, they can however be used for subjects of other armies & time periods. These American vehicles tend to have a particular aspect and to achieve these affects the set contains one product for washes and another for the streaking effects. Also included is an 3Gen acrylic base color of one of the most common colors of the American forces in desert zones, the FS 33446. A color faithfully reproduced and lightly softened to compensate for the scale effects.
You can use this color on all your American vehicles and it can be weathered with the 2 weathering effect products included in this set to obtain results very close to that of real vehicles.
This set contains:
Los vehÃculos estadounidenses modernos en Afganistán e Irak se están convirtiendo en una temática tan importante como los vehÃculos alemanes de la Segunda Guerra Mundial. Muchas marcas de maquetas reproducen vehÃculos de estos dos teatros de operaciones, OIF y OEF. Este set ha sido diseñado exclusivamente para modelistas que montan este tipo de vehÃculos, sin embargo, pueden usarse para vehÃculos de otros ejércitos y perÃodos de tiempo con colores similares. También se incluye un color base acrÃlico 3Gen de uno de los colores más comunes de las fuerzas estadounidenses en zonas desérticas, el FS 33446. Un color fielmente reproducido y ligeramente suavizado para compensar el efecto de escala.
Este conjunto contiene:
F430
With this filter you will be able to imitate the degradation of color exposed to extreme conditions.
*New formulated special purpose filter featuring fine suspended pigments for a perfect transparent effect.
FILTER TECHNIQUES: Apply the filter using a soft medium sized round paintbrush.Deposit the filter onto your scale model in areas where you want to alter the base tone. Let the filter dry for about 15 minutes. With this technique you will be able to fade, unify, and enrich the colors. You will also be able to tint the contrast between colors and get perfect transitions. Use each filter in the appropiate tone to get maximum effects.
Con este filtro podrá imitar la degradación del color expuesto a condiciones extremas.
*Nuevo filtro especialmente formulado con pigmentos finos suspendidos para un obtener un efecto transparente perfecto.
TÉCNICAS DE APLICACIÓN DE FILTROS: Aplique el filtro con un pincel de punta redonda y suave de tamaño mediano. Deposite el filtro en su modelo a escala en las áreas donde desea alterar el tono base. Deje que el filtro se seque durante unos 15 minutos. Con esta técnica podrá difuminar, unificar y enriquecer los colores. También podrá matizar el contraste entre colores y conseguir transiciones perfectas. Utilice cada filtro en el tono adecuado para obtener la máxima eficacia.
Acrylic Thinner – Diluyente acrÃlico
AK712
5,00€Water based thinner especially designed for use with AK-Interactive acrylics. Our non-toxic, low odor thinner is also compatible for use with other brands.
Not just the typical alcohol and water based thinner, our specially formulated product is ideal for creating the perfect paint consistency for brush and airbrush. Non-toxic and odorless.
Diluyente a base de agua especialmente diseñado para usar con acrÃlicos AK-Interactive. Nuestro diluyente no tóxico y de bajo olor también es compatible con otras marcas.
No solo el diluyente tÃpico a base de alcohol y agua, nuestro producto especialmente formulado es ideal para crear la consistencia de pintura perfecta para pincel y aerógrafo. No tóxico e inodoro.
F419
Use over brown, yellow and sand colors
With this filter you will be able to change subtle base coats.
*New formulated special purpose filter featuring fine suspended pigments for a perfect transparent effect.
FILTER TECHNIQUES: Apply the filter using a soft medium sized round paintbrush.Deposit the filter onto your scale model in areas where you want to alter the base tone. Let the filter dry for about 15 minutes. With this technique you will be able to fade, unify, and enrich the colors. You will also be able to tint the contrast between colors and get perfect transitions. Use each filter in the appropiate tone to get maximum effects.
Usar en colores marrones, amarillos y arena.
Con este filtro podrá realizar cambios sutiles en la capa base.
*Nuevo filtro especialmente formulado con pigmentos finos suspendidos para un obtener un efecto transparente perfecto.
TÉCNICAS DE APLICACIÓN DE FILTROS: Aplique el filtro con un pincel de punta redonda y suave de tamaño mediano. Deposite el filtro en su modelo a escala en las áreas donde desea alterar el tono base. Deje que el filtro se seque durante unos 15 minutos. Con esta técnica podrá difuminar, unificar y enriquecer los colores. También podrá matizar el contraste entre colores y conseguir transiciones perfectas. Utilice cada filtro en el tono adecuado para obtener la máxima eficacia.
AK263
3,75€Enamel Product.
This product allow us bring life to the details of the wood accessories of our vehicles and complements. This wash is specially designed to be applied over the light colors of the wood, or even dark to create deep and enhance the wood.
The basic technique used to weather any type of model is the wash, a classic technique that is still one of the most used techniques in modelling today. Apply the washes after shaking the bottle with a large brush to pick out details and creating shadows. The excess of the wash can be easily removed with a clean brush and White Spirit.
Producto Esmalte.
Este producto ha sido especialmente desarrollado para resaltar y ser aplicado sobre piezas pintadas en tonos marrones que simulan diferentes tipos de madera. El exceso de lavado se puede eliminar fácilmente con un pincel limpio y White Spirit.
Brown blue Wash for Panzer grey (75ml)
P285
Modeling washes are a staple product for enhancing and contrasting model details.
Enamel product. It can be diluted with White Spirit. Shake it well before use.
WASH TECHNIQUE:
Apply the wash using a medium sized round soft paintbrush. Deposit the wash onto your scale model around details, seams and in holes creating fake shadows hi-lighting details. Let the wash dry for about 15 minutes then clean the excess using a brush dampened with Thinner for Washes. Use a fine pointy 00 size brush to apply more refined pin-washes where you feel they might be necessary such as in weld seams and around bolts and rivets
Los lavados para modelismo son un producto básico para realzar y contrastar los detalles de las maquetas.
Producto enamel. Puede diluirse con White Spirit. Agitar bien antes de usar.
TÉCNICA DE LAVADO:
Aplique el lavado con un pincel de punta redonda y de tamaño mediano. Deposite el lavado en su maqueta alrededor de los detalles, los volúmenes y paneles para resaltar los detalles. Deje que el lavado seque durante aproximadamente 15 minutos y luego limpie el exceso con un pincel humedecido con White Spirit. Use un pincel de punta fina y tamaño pequeño para aplicar lavados más precisos donde crea que puedan ser necesarios, tal como costuras de soldadura y alrededor de pernos y remaches.
DARK BROWN WASH FOR GREEN VEHICLES
AK045
3,75€Enamel Product.
Wash dark brown indicate for green colored vehicles.
The basic technique used to weather any type of model is the wash, a classic technique that is still one of the most used techniques in modelling today. Apply the washes after shaking the bottle with a large brush to pick out details and creating shadows.
The excess of the wash can be easily removed with a clean brush and White Spirit or odorless.
** Download here a technical sheet on how to use it.
Producto esmalte.
Este lavado marrón oscuro de esmalte está especialmente diseñado para resaltar los detalles en vehÃculos de color verde.
Aplique el lavado con un pincel de punta redonda y de tamaño mediano. Deposite el lavado en su maqueta alrededor de los detalles, los volúmenes y los paneles para resaltar los detalles. Deje que el lavado seque durante aproximadamente 15 minutos y luego limpie el exceso con un pincel humedecido con White Spirit. Use un pincel de punta fina y tamaño pequeño para aplicar lavados más precisos donde crea que puedan ser necesarios, tal como costuras de soldadura y alrededor de pernos y remaches.
** Descargue aquà una ficha técnica sobre cómo utilizarlo.
AK050
6,20€Our odorless turpentine is very different from our white spirit. Besides being odorless, this product is softer and less aggressive than our White Spirit. This property of the odorless thinner (Turpentine) makes it great for delicate, soft and subtle blending. This thinner is exclusive to enamel and oil paint. This larger bottle gives you more thinner and costs less when compared to buying three 35ml bottles.
100 ml.
Nuestra trementina inodora es muy diferente de nuestro white spirit. Además de ser inodoro, este producto es más suave y menos agresivo que nuestro White Spirit. Esta propiedad del diluyente inodoro (Turpentine) lo hace ideal para mezclas delicadas, suaves y sutiles. Este diluyente es exclusivo para esmalte y pintura al óleo. Esta botella más grande le proporciona más diluyente y cuesta menos en comparación con la compra de tres botellas de 35 ml.
100 ml.
AK083
3,75€Enamel Product.
The perfect color to apply on tank tracks, however it can used to do any type of rusting metal effects. The basic technique used to weather any type of model is the wash, a classic technique that is still one of the most used techniques in modelling today. Apply the washes after shaking the bottle with a large brush to pick out details and creating shadows.
The excess of the wash can be easily removed with a clean brush and White Spirit.
Producto Esmalte.
El color perfecto para aplicar sobre las orugas de tanques, además, gracias a su tonalidad oscura puede usarse para hacer efectos oxidados en cualquier tipo de partes metálicas.
Puede combinarse con AK046 para conseguir efectos de óxido realistas en vehÃculos abandonados.
Aplique el lavado con un pincel de punta redonda y de tamaño mediano. Deposite el lavado en su maqueta alrededor de los detalles, los volúmenes y los paneles para resaltar los detalles. Deje que el lavado seque durante aproximadamente 15 minutos y luego limpie el exceso con un pincel humedecido con White Spirit. Use un pincel de punta fina y tamaño pequeño para aplicar lavados más precisos donde crea que puedan ser necesarios, tal como costuras de soldadura y alrededor de pernos y remaches.
P409
EFFECTS:
Apply the effects using a medium sized round soft paintbrush. Deposit the wash onto your scale model around details, seams and in holes creating fake shadows hi-lighting details. Let dry for about 15 minutes then clean the excess using a brush dampened with Thinner for Washes. Use a fine pointy 00 size brush to apply more refined pin-washes where you feel they might be necessary such as in weld seams and around bolts and rivets.
The efect can be used in vertical lines to create streaking effects.
Este producto crea una apariencia de humedad en las superficies. La fórmula de este producto simula con gran realismo multitud de efectos que pueden verse en cualquier vehÃculo. No es un barniz brillante, este producto ha sido especialmente diseñado para realizar este tipo de efectos, ofreciendo diferentes intensidades de brillo dependiendo de la superficie.
Agitar bien antes de usar. Puedes aplicarlo sobre tu vehÃculo o en una zona que necesites aparezca húmeda y después puedes trabajarlo con un pincel y un poco de White Spirit.
AK063
11,25€This three color set is ideal to make slime and fuel effects in your scale models. This set will enable the modeler to recreate Slimy Grime in ships and boats, docks, old wooden items and LVTP vehicles. Also, this set includes a very useful color to make fuel stains that are very different than grease and oil effects.
This set contains:
Este set de tres colores es ideal para crear efectos de chorretones y derrames de combustible. También incluye dos productos para recrear chorretones de humedad verdosa y algas en barcos y embarcaciones, muelles, artÃculos de madera viejos, escenas, vehÃculos LVTP, etc.
Este conjunto contiene:
AK556
11,25€Special set to make weathering effects in ships for all scales, army’s even civil ships.
This set contains:
Set especial para hacer efectos de weathering en los barcos de todas las escalas, ejércitos e incluso en barcos civiles.
Este set contiene:
Cookie | Duration | Description |
---|---|---|
PHPSESSID | session | This cookie is native to PHP applications. The cookie is used to store and identify a users' unique session ID for the purpose of managing user session on the website. The cookie is a session cookies and is deleted when all the browser windows are closed. |
viewed_cookie_policy | 1 year | The cookie is set by the GDPR Cookie Consent plugin to store whether or not the user has consented to the use of cookies. It does not store any personal data. |
Cookie | Duration | Description |
---|---|---|
pelm_last_loaded_shop_type | 1 month | No description available. |
woocommerce_recently_viewed | session | Description unavailable. |
wp_woocommerce_session_9205d68996927145eedf8afcab99571e | 2 days | No description |
yith_wcwl_session_9205d68996927145eedf8afcab99571e | 1 month | No description |
Cookie | Duration | Description |
---|---|---|
_fbp | 3 months | This cookie is set by Facebook to display advertisements when either on Facebook or on a digital platform powered by Facebook advertising, after visiting the website. |
fr | 3 months | Facebook sets this cookie to show relevant advertisements to users by tracking user behaviour across the web, on sites that have Facebook pixel or Facebook social plugin. |
loc | 1 year 1 month | AddThis sets this geolocation cookie to help understand the location of users who share the information. |
VISITOR_INFO1_LIVE | 5 months 27 days | A cookie set by YouTube to measure bandwidth that determines whether the user gets the new or old player interface. |
YSC | session | YSC cookie is set by Youtube and is used to track the views of embedded videos on Youtube pages. |
yt-remote-connected-devices | never | YouTube sets this cookie to store the video preferences of the user using embedded YouTube video. |
yt-remote-device-id | never | YouTube sets this cookie to store the video preferences of the user using embedded YouTube video. |
yt.innertube::nextId | never | This cookie, set by YouTube, registers a unique ID to store data on what videos from YouTube the user has seen. |
yt.innertube::requests | never | This cookie, set by YouTube, registers a unique ID to store data on what videos from YouTube the user has seen. |
Cookie | Duration | Description |
---|---|---|
_ga | 2 years | The _ga cookie, installed by Google Analytics, calculates visitor, session and campaign data and also keeps track of site usage for the site's analytics report. The cookie stores information anonymously and assigns a randomly generated number to recognize unique visitors. |
_ga_BK3V7Y3VZB | 2 years | This cookie is installed by Google Analytics. |
_gat_gtag_UA_105576964_1 | 1 minute | Set by Google to distinguish users. |
_gid | 1 day | Installed by Google Analytics, _gid cookie stores information on how visitors use a website, while also creating an analytics report of the website's performance. Some of the data that are collected include the number of visitors, their source, and the pages they visit anonymously. |
at-rand | never | AddThis sets this cookie to track page visits, sources of traffic and share counts. |
CONSENT | 2 years | YouTube sets this cookie via embedded youtube-videos and registers anonymous statistical data. |
uvc | 1 year 1 month | Set by addthis.com to determine the usage of addthis.com service. |
Cookie | Duration | Description |
---|---|---|
pll_language | 1 year | The pll _language cookie is used by Polylang to remember the language selected by the user when returning to the website, and also to get the language information when not available in another way. |