AK Real Colors
- View as:
- Sort by:
Liquid mask is quite popular among modelers for protecting parts that don’t need to be painted. Our liquid mask has a characteristic blue tone and sweet smell of vanilla, is not aggressive and will not cause damage even on clear plastic parts. It dries quickly leaving the masked surface free of paint, and finally it can be removed as a thin elastic film.
IMPORTANT: CLOSE THE BOTTLE ONCE USED FOR PRESERVATION
Recommended product to adhere pigments to the surfaces of your models and bases. Use capillary effect to allow fluid to flow over pigment powder. Once dried, pigments are permanently adhered to the surface and return to dry color.
High quality white acrylic putty, extra hard, (20 ml, 39 gr.). Polyurethane water based. One component product. It does not shrink when drying. Specially designed for modeling. Superfine filler with perfect adhesion and sanding properties. It is water based so there is no smelly chemicals in the mix to cause skin and respiratory problems. It can be cleaned off with water
High quality grey acrylic putty, standard hardness (20ml, 39 gr.). Polyurethane water based one component product. It does not shrink when drying. Specially designed for modeling. Superfine filler with perfect adhesion and sanding properties. It is water based so there is no smelly chemicals in the mix to cause skin and respiratory problems. Can be cleaned off with water.
Adhesive to fix down all kinds of earth, gravel, small stones, sand, etc to your bases. This special adhesive, with an alcohol base, is much more effective than the traditional white glue. The white glue tends to leave a plastic finish over the surface giving an unreal aspect and also tends not to expand well through the material. But this new adhesive expands rapidly and is adsorbed by the stones and sand saving a lot of time when fixing down rubble for example. This product is easily cleaned using alcohol, can be applied using an airbrush or paint brush and the drying process can be accelerated with a hairdryer or any other type of heat source. Although it’s matt when it dries, on smooth surfaces it can leave a light satin mark, however, this can be removed with a matt varnish.
Original product of AK-interactive, don’t choose copies.
The definitive liquid to strip the paint completely or selectively from
models or figures without damaging the plastic, resin or white metal.
SUPER special product which CONVERTS any acrylic paint into washable, just think of the effects that can be achieved on any kind of scale models.
Developed by AK and no other brands has this product.
Add a 10% of this product to your acrylic paint to make it washable. Once the mix is applied you can remove the desired quantity with a brush moistened in water. This product is recommended for winter camouflages, to create any dust effects, or to imitate the lesser quality paints used on some vehicles, for example in the desert where the paint underneath was released little by little. The result is very convincing as it is based on the same principle as the real paint. The possibilities are endless because the effect can be used with any color.
Liquid to adapt your decals to any surface. Wet the decal with the solution and a brush after place it. Leave for a few minutes, then with the help of the brush, adapt it to the surface to fully integrate it. With this product no decal will resist, no matter how complicated the surface be. And only with one product!
A must have product for any modeler who wants to add volume to their mud and soil mixtures whether is for a diorama or to be splashed on to their vehicle. Mix the plaster in with any of our high quality Nature Effects line of different types of mud, earth, dust and soil. The combinations are endless. If your mixture is too thick you can dilute it with white spirit. If is too thin, add more plaster. Either paint your mixture on to your diorama or load a paint brush with your mixture and using your airbrush, blow short bursts of air at the brush to recreate splatters.
Now you can keep your mixes in crystal bottles contains 10 ml and includes 4 bottles
100ml bottle. High quality acrylic resin to mix with pigments to fix textures and with a matte finish. TEXTURIZER can be used to make terrains and lower parts of vehicles
Liquid to slow down the drying times for any acrylic paint. To use simply add a few drops to your airbrush and will prevent fast drying at the tip of the airbrush especially in high temperature conditions.
Also can be used to apply with brush to get glazing effects, or just delay dry in a controled way. Non-toxic and odorless.
High quality product developed to enhance, repair, and achieve extremely realistic transparent glass-like finishes on clear plastic parts. Simply dip and let dry for a few minutes. The bottle is think to dip parts without problem. Clean excess around the edges to achieve a uniform layer. For best results, allow product to dry in a dust-free environment. This product, when applied to clear plastic, will result in a realistic glass-like appearance on parts like clear plastic cockpit canopies or other clear parts.
High quality product to create a protective and very realistic glossy sheen to areas where applied. This product also serves as a protective layer for the paint underneath. Apply in the way you would with any varnish. Apply and let dry for a few minutes. This product can also serve as a perfect finishing touch for metallic paints such as AK Interactive Xtreme Metal. Apply Gauzy Agent to any single part or sections of your model that are begging for an incredible transparent shine. With self-leveling properties, it can be applied with brush or airbrush.
75ml. New product to create texture of cast in any plastic, resin or metal part of your model. It can be used for military, Scify, Gundam or any model branch to create a cast effect only with this acrylic paste. Just extend, work and let dry. Your models will have a complete different appearance.