This self-leveling coating is useful for lling bumps, dents, scratches, for removing bubbles, texturing… It is suitable for large-scale repairs and can be used as soluble putty. Before using Micro ller primer you will need to shake the spray well, at least a minute to get a good mixture. Once dry, it perfectly covers all the small imperfections, scratches, moulding marks, sanding abrasions and all minor defects. Then, after a smooth sanding, you’ll have a perfect surface for successfully applying the paint that suits you best.

Product in spray with a grey tone special for priming resin parts featuring a high opacity once dry. This spray primer can be applied directly on resin, is ul- tra-resistant and with the best adherence.

Clean and degrease the resin parts to be painted. The paint is a synthetic lacquer that cures in a short period of time. Easy to apply, the primer of resin parts will be- come simple and more effective.

Before using you will need to shake the spray well, at least a minute to get a good mixture. Paint with the can in vertical position in fast and thin coats at a distance of about 25 cm., allowing to dry for 5 minutes between layers. At the end of the painting turn the can upside down holding the spray nozzle for a few seconds in this position, until no more paint comes out of the dif- fuser, thus avoiding the obstruction of the diffuser.

Clean and degrease the metal parts to be painted. The paint is a synthetic lacquer that cures in a short period of time. Easy to apply, the primer of metal parts will become simple and more effective.

Before using you will need to shake the spray well, at least a minute to get a good mixture. Paint with the can in vertical position in fast and thin coats at a distance of about 25 cm., allowing to dry for 5 minutes between layers. At the end of the painting turn the can upside down holding the spray nozzle for a few seconds in this position, until no more paint comes out of the dif- fuser, thus avoiding the obstruction of the diffuser.