Weight | 0.001 kg |
---|---|
Dimensions | 20 × 15 × 10 cm |
Availability: Out of stock
45,50€
1/10 scale resin bust
Pieces : 9 parts
Unassembled and unpainted kit
Sculpted and painted by Sang Eon Lee
Busto de resina a escala 1/10
Piezas : 9 piezas
Kit sin montar y sin pintar
Esculpido y pintado por Sang Eon Lee
Weight | 0.001 kg |
---|---|
Dimensions | 20 × 15 × 10 cm |
AK11505
7,95€
AK9009
9,90€Precision cutting pliers with an ergonomic handle covered with an orange non-slip vinyl foam, with a spring return.
They make a clean and precise cut. No need to touch up.
Suitable for parts or rods of plastic, PVC, resin or ABS less than 4mm.
Do not use to cut metal parts.
Alicates de corte de precisión con mango ergonómico cubierto con espuma de vinilo naranja, antideslizante y con muelle de retorno.
Realizan un corte limpio y preciso sin que sea necesario retocar.
Adecuado para piezas o varillas de plástico, PVC, resina o ABS menores de 4mm.
No utilizar para cortar piezas de metal.
TOP LINE DELUXE Marta Kolinsky KIT
ABT850
80,95€AK9204
6,50€ENGLISH
AK183
5,25€The original one.
A high quality ultra matte varnish which can be applied with a brush or an airbrush to achieve a dead flat finish on any surface.
Acrylic Ultra Matte Varnish formulated for maximum airbrush performance. Water soluble, odorless, and non-toxic. Shake before each use. We recommend AK-712 Acrylic Thinner for thinning. Dries completely in 12 hours.
60 ml.
El Original.
Barniz ultra mate de alta calidad que puede ser aplicado con pincel o con aerógrafo para lograr un acabado mate en cualquier superficie.
Nuestro barniz ultra mate acrílico está formulado para el máximo rendimiento del aerógrafo. Soluble en agua, inodoro y no tóxico. Agitar antes de cada uso. Recomendamos AK-712 Acrylic Thinner para diluir. Se seca completamente en 12 horas.
60 ml.
FA 614
19,50€A set designed for thorough cleaning of any airbrush.
A glass jar with a plastic screw cap is used to purge the airbrush with the cleaner after each use. Thanks to a special filter in the upper part, all impurities and liquid remain in the container. Additionally, the lid is equipped with an airbrush stand.
Cleaners and rods are used to thoroughly clean various elements of airbrushes: tips, nozzles, bodies and other elements. The needle, on the other hand, cleans the inside of the airbrush nozzle or other internal parts of the airbrush, such as the needle guide channel.
Container Height: 85mm, diameter: 100mm.
Un conjunto diseñado para la limpieza a fondo de cualquier aerógrafo.
Se usa un frasco de vidrio con un tapón de rosca de plástico para purgar el aerógrafo con el limpiador después de cada uso. Gracias a un filtro especial en la parte superior, todas las impurezas y líquidos permanecen en el recipiente. Además, la tapa está equipada con un soporte para aerógrafo.
Los limpiadores y las varillas se utilizan para limpiar a fondo varios elementos de los aerógrafos: puntas, boquillas, cuerpos y otros elementos. La aguja, por otro lado, limpia el interior de la boquilla del aerógrafo u otras partes internas del aerógrafo, como el canal de guía de la aguja.
Altura del contenedor: 85 mm, diámetro: 100 mm.
ABT114
6,50€For precision works is necessary to keep the tip of your brushes in a perfect state. This gel is indicated to keep the tip sharp and in perfect use condition with all brushes fibers compacted and never open or deformed. With this gel you will keep your brushes always like new ones after using and cleaning them (it can be used after the application of our ABT117 Magic Potion for Brushes or any other chemical or natural cleaner).
Para trabajos de precisión es necesario mantener la punta de sus pinceles en perfecto estado. Este gel está indicado para mantener la punta afilada y en perfecto estado de uso con todas las fibras de los pinceles compactadas y nunca abiertas o deformadas. Con este gel mantendrá sus pinceles siempre como nuevos después de usarlos y limpiarlos (se puede utilizar después de la aplicación de nuestra Poción Mágica para Pinceles ABT117 o cualquier otro limpiador químico o natural).
FIGURES F.A.Q. – FIGURE PAINTING TECHNIQUES – THE COMPLETE GUIDE FOR FIGURE SCALE MODELERS
74,90€
English / Spanish. 488 pages. Semi Hard Cover.
ARE YOU READY TO IMPROVE YOUR PAINTING METHODS AND CHANGE THE FINISH OF YOUR FIGURES FOREVER?
In this book you will find advice and explanation of all techniques and processes which you need to master painting of all types of figures, provided by the best painter of all time: Master Kirill Kanaev.
This guide through the world of figures is a unique book, full of impressive works and examples used to demonstrate the secrets of miniature painting from the basic pillars to the most complex techniques.
Now we put this knowledge in your hands to allow you to become a high level painter.
Ingles Español. 488 páginas. Cubierta semi dura.
¿ESTÁS LISTO PARA MEJORAR TUS MÉTODOS DE PINTURA Y CAMBIAR EL ACABADO DE TUS FIGURAS PARA SIEMPRE?
En este libro encontrarás consejos y explicaciones de todas las técnicas y procesos que necesitas para dominar la pintura de todo tipo de figuras, proporcionados por el mejor pintor de todos los tiempos: el Maestro Kirill Kanaev.
Esta guía por el mundo de las figuras es un libro único, lleno de impresionantes obras y ejemplos que se utilizan para demostrar los secretos de la pintura en miniatura desde los pilares básicos hasta las técnicas más complejas.
Ahora ponemos este conocimiento en tus manos para que puedas convertirte en un pintor de alto nivel.
MAGNET ULTRA RESISTANT CYANOCRYLATE GLUE
AK12015
7,60€20g.
General-purpose cyanoacrylate 401. Fast drying, extra strong, low viscosity, specially formulated for adhesion between materials that can even have an acidic surface. Can be used with rubber, leather, wood, metal, resin and plastic. The surfaces to be joined must be free of dirt, dust and grease. A small amount of adhesive should be applied; more cyanoacrylate does not guarantee a better bond and makes more difficult the drying of the adhesive that is effective for bonding.
– 99% Cyano.
– Ethyl cyanoacrylate
– Use temperature: -55º to 120º
– Set time: between 3 and 10 seconds. The gaps and uneven surfaces can increase this setting time. It is not necessary to use clamps. Holding the pieces firmly for 10-30 seconds will ensure better adhesion.
– Definitive cure time: 24 h
– Viscosity: 110 mPa.S
– Shear strength: 21.0 MPa
* Bottles are not filled at a 100% to leave some air and make it work properly.
20g.
Cianoacrilato de uso general 401, secado rápido, extra fuerte, baja viscosidad especialmente formulado para la adhesión entre materiales que incluso pueden tener una superficie ácida. Se puede usar con caucho, cuero, madera, metal, resina y plástico. Las superficies a unir deben estar libres de suciedad, polvo y grasa. Se debe aplicar una pequeña cantidad de adhesivo; más cianoacrilato no garantiza una mejor unión y hace más difícil el secado del adhesivo que es efectivo para la unión.
– 99% Cyano
– Cianoacrilato de etilo
– Temperatura de uso: -55º a 120º
– Tiempo de fraguado: entre 3 y 10 segundos. Los huecos y las superficies irregulares pueden aumentar este tiempo de fraguado. No es necesario usar abrazaderas. Sostener las piezas firmemente durante 10-30 segundos asegurará una mejor adhesión.
– Tiempo de curado definitivo: 24 h.
– Viscosidad: 110 mPa.S
– Resistencia al corte: 21.0 MPa
*Las botellas no se llenan al 100% para dejar algo de aire y que funcione correctamente.
SURVIVAL WEATHERING BRUSHES SET
AK663
12,20€An arsenal of brushes designed by the weathering experts here at AK. Top quality weathering products require the right tools to be applied; our Survival Weathering Brush set is the right set of tools you need. Contained in this set are the brushes needed to streak, chip, wash, and apply pigments plus much more.
Includes:
Un arsenal de pinceles diseñados por los expertos en weathering de AK. Los productos de weathering de alta calidad requieren una aplicación con las herramientas adecuadas; nuestro juego de pinceles de supervivencia es el conjunto de herramientas adecuado que necesitas. En este juego se encuentran los pinceles necesarios para hacer líneas, desconchar, hacer lavados, aplicar pigmentos y mucho más.
Incluye:
AK11505
7,95€
AK9009
9,90€Precision cutting pliers with an ergonomic handle covered with an orange non-slip vinyl foam, with a spring return.
They make a clean and precise cut. No need to touch up.
Suitable for parts or rods of plastic, PVC, resin or ABS less than 4mm.
Do not use to cut metal parts.
Alicates de corte de precisión con mango ergonómico cubierto con espuma de vinilo naranja, antideslizante y con muelle de retorno.
Realizan un corte limpio y preciso sin que sea necesario retocar.
Adecuado para piezas o varillas de plástico, PVC, resina o ABS menores de 4mm.
No utilizar para cortar piezas de metal.
TOP LINE DELUXE Marta Kolinsky KIT
ABT850
80,95€AK9204
6,50€ENGLISH
AK183
5,25€The original one.
A high quality ultra matte varnish which can be applied with a brush or an airbrush to achieve a dead flat finish on any surface.
Acrylic Ultra Matte Varnish formulated for maximum airbrush performance. Water soluble, odorless, and non-toxic. Shake before each use. We recommend AK-712 Acrylic Thinner for thinning. Dries completely in 12 hours.
60 ml.
El Original.
Barniz ultra mate de alta calidad que puede ser aplicado con pincel o con aerógrafo para lograr un acabado mate en cualquier superficie.
Nuestro barniz ultra mate acrílico está formulado para el máximo rendimiento del aerógrafo. Soluble en agua, inodoro y no tóxico. Agitar antes de cada uso. Recomendamos AK-712 Acrylic Thinner para diluir. Se seca completamente en 12 horas.
60 ml.
FA 614
19,50€A set designed for thorough cleaning of any airbrush.
A glass jar with a plastic screw cap is used to purge the airbrush with the cleaner after each use. Thanks to a special filter in the upper part, all impurities and liquid remain in the container. Additionally, the lid is equipped with an airbrush stand.
Cleaners and rods are used to thoroughly clean various elements of airbrushes: tips, nozzles, bodies and other elements. The needle, on the other hand, cleans the inside of the airbrush nozzle or other internal parts of the airbrush, such as the needle guide channel.
Container Height: 85mm, diameter: 100mm.
Un conjunto diseñado para la limpieza a fondo de cualquier aerógrafo.
Se usa un frasco de vidrio con un tapón de rosca de plástico para purgar el aerógrafo con el limpiador después de cada uso. Gracias a un filtro especial en la parte superior, todas las impurezas y líquidos permanecen en el recipiente. Además, la tapa está equipada con un soporte para aerógrafo.
Los limpiadores y las varillas se utilizan para limpiar a fondo varios elementos de los aerógrafos: puntas, boquillas, cuerpos y otros elementos. La aguja, por otro lado, limpia el interior de la boquilla del aerógrafo u otras partes internas del aerógrafo, como el canal de guía de la aguja.
Altura del contenedor: 85 mm, diámetro: 100 mm.
TB 35082
27,00€2 figures.
Sculpted by Krisztian Bodi
Boxart painted by Juan Antonio Pérez Marchante
2 figuras.
Esculpido por Krisztian Bodi
Boxart pintado por Juan Antonio Pérez Marchante
CSM 35008
45,95€From the late Thirties until the outbreak of WWII, near all of the Lancias were allotted to reserve and/or second-line units or depots (even in North Africa). Although some weaknesses were noted, the Lancias were considered suitable for their role. At the beginning of WW II, the Italian Army had on hand approximately 62 Lancia 1915 and 1917 pattern armoured cars, some were re-armed with Fiat14/35 machine guns and a few others with Breda Safat 7.7 mm – a good weapon from Regia Aeronautica (Italian Air Force) stocks. Only in the very later part of 30’s some progress had been made in the general direction of mechanization.
Very few Lancias saw action during the early years of the war, as it rapidly became obvious that their thin armour and poor armament could not face enemy weaponry with immunity. The outbreak of the war in June of 1940 found the Italian armoured units in AOI (Italian East Africa) almost completely unprepared, even for her own defence. Between the few armoured vehicles present in the country were few Lancias
However, the vehicle remained in service throughout the war, until 1943. Only six Lancias were in the armoured car platoon of the ‘Battaglione Misto Egeo’ (Mixed Battalion, Aegean) at the Psito barracks on the island of Rhodes, under the command of the Italian ‘Regina’ infantry division. They took part in the confusing events of the armistice in September 1943 and in the confrontation with the Germans, but the crews had to sabotage their vehicles to prevent them from falling into German hands. A few of the armoured cars were lost in the Balkans, but records are scanty. Others vehicles were seized by the Germans after Italy switched sides in 1943 and given the designation of Panzerspähwagen 1ZM (I). They were used almost entirely from February 1944 around Abbazia and Fiume for anti-partisan duties, where their lack of armor protection and firepower would not be as critical. IN 1945 the Lancias was employed in North-East Italy.
Desde finales de los años treinta hasta el estallido de la Segunda Guerra Mundial, casi todas las Lancias fueron asignadas a unidades o depósitos de reserva y / o de segunda línea (incluso en el norte de África). Aunque se observaron algunas debilidades, los Lancia se consideraron adecuados para su función. Al comienzo de la Segunda Guerra Mundial, el ejército italiano tenía a mano aproximadamente 62 carros blindados Lancia 1915 y 1917, algunos fueron armados nuevamente con ametralladoras Fiat14 / 35 y algunos otros con Breda Safat 7.7 mm, una buena arma de la Regia Aeronautica. Acciones (Fuerza Aérea Italiana). Sólo en la última parte de los años 30 se habían realizado algunos avances en la dirección general de la mecanización.
Muy pocos Lancias vieron acción durante los primeros años de la guerra, ya que rápidamente se hizo evidente que su delgada armadura y su pobre armamento no podían enfrentar el armamento enemigo con inmunidad. El estallido de la guerra en junio de 1940 encontró a las unidades blindadas italianas en AOI (África Oriental Italiana) casi completamente desprevenidas, incluso para su propia defensa. Entre los pocos vehículos blindados presentes en el país se encontraban pocos Lancias
Sin embargo, el vehículo permaneció en servicio durante toda la guerra, hasta 1943. Solo seis Lancias estaban en el pelotón de vehículos blindados del ‘Battaglione Misto Egeo’ (Batallón Mixto, Egeo) en el cuartel de Psito en la isla de Rodas, bajo el mando de la división de infantería italiana “Regina”. Participaron en los confusos hechos del armisticio de septiembre de 1943 y en el enfrentamiento con los alemanes, pero las tripulaciones tuvieron que sabotear sus vehículos para evitar que cayeran en manos alemanas. Algunos de los vehículos blindados se perdieron en los Balcanes, pero los registros son escasos. Otros vehículos fueron incautados por los alemanes después de que Italia cambiara de bando en 1943 y recibieran la designación de Panzerspähwagen 1ZM (I). Se utilizaron casi en su totalidad desde febrero de 1944 en Abbazia y Fiume para tareas antipartisanas, donde su falta de protección de armadura y potencia de fuego no sería tan crítica. EN 1945, los Lancia se emplearon en el noreste de Italia.
WWII German Pz.III 5cm L/60 barrel (for PZ.III Ausf.L/M 1/35)
DEF DM35117
4,60€
1/48 Boeing F/A-18F Super Hornet
MM LS-013
72,50€As the latest F / A-18 variants, the F / A-18E / F aircraft have greatly improved electronic equipment and extended combat radius. To perform the missions like air superiority and ground attack and complex tasks including reconnaissance and electronic warfare, the F / A-18F’s rear cockpit weapon systems operator has new advanced cockpit displays and control system. The pilot and the weapon systems operator can perform air-to-air and air-to-ground tasks at the same time. Before the next-generation carrier-based fighters enter service, the F / A-18F will still be the main combat aircraft of the U.S. aircraft carrier battle group.
MENG releases this brand-new LS-013 Boeing F/A-18E Super Hornet model kit licensed by The Boeing Company. The finished model will be 377.9mm long and 273.4mm wide. This kit includes pre-cut stainless steel PE parts and pre-cut painting masks.
LS-013 Boeing F/A-18F Super Hornet
Scale: 1/48
Release in: July 2021
Flaps and slats can be installed in retracted or deployed positions.
Horizontal stabilizers and rudders are movable.
The two-seat variant’s cockpit and cockpit interior equipment are precisely replicated.
The specially designed pluggable main pylons allow the easy change of weapons; this kit includes AGM-65 air-to-ground missiles and GBU-16 laser-guided bombs.
Two U.S. Navy pilot figures featuring realistic gestures and finely replicated suit and equipment are included. Two flight helmet options are provided.
This kit includes optional exterior parts.
Como las últimas variantes del F / A-18, los aviones F / A-18E / F tienen equipos electrónicos muy mejorados y un radio de combate extendido. Para realizar misiones como superioridad aérea y ataque terrestre y tareas complejas que incluyen reconocimiento y guerra electrónica, el operador de sistemas de armas de la cabina trasera del F / A-18F tiene nuevas pantallas de cabina y un sistema de control avanzados. El piloto y el operador de sistemas de armas pueden realizar tareas aire-aire y aire-tierra al mismo tiempo. Antes de que los cazas basados en portaaviones de próxima generación entren en servicio, el F / A-18F seguirá siendo el principal avión de combate del grupo de batalla de portaaviones de EE. UU.
MENG lanza este nuevo kit modelo LS-013 Boeing F / A-18E Super Hornet con licencia de The Boeing Company. El modelo terminado tendrá 377,9 mm de largo y 273,4 mm de ancho. Este kit incluye piezas de PE de acero inoxidable precortadas y máscaras de pintura precortadas.
LS-013 Boeing F / A-18F Super Hornet
Escala: 1/48
Lanzamiento: julio de 2021
Las aletas y las lamas se pueden instalar en posiciones retraídas o desplegadas.
Los timones y estabilizadores horizontales son móviles.
La cabina del piloto y el equipamiento interior de la cabina de la variante de dos asientos se reproducen con precisión.
Los pilones principales enchufables especialmente diseñados permiten el cambio fácil de armas; este kit incluye misiles aire-tierra AGM-65 y bombas guiadas por láser GBU-16.
Se incluyen dos figuras de piloto de la Marina de los EE. UU. Con gestos realistas y un traje y equipo finamente replicados. Se proporcionan dos opciones de casco de vuelo.
Este kit incluye piezas exteriores opcionales.
Road Barriers (2×2 & 2×4) 1/35
RTD35639-K
11,50€High-detailed Diorama Set.
Includes detailed Ceramic
Conjunto de diorama muy detallado.
Incluye piezas de cerámica detalladas
HUSKY MK. III VMMD W/Interrogation arm 1/35
AFV AF35354
72,50€■ Highly detailed forward mounted interrogation arm.
■ Decals for Husky MK III with interrogation arm configuration.
■ Brazo de interrogación montado en la parte delantera altamente detallado.
■ Calcomanías para Husky MK III con configuración de brazo de interrogación.
Australian army M113A1 APC with T50 turret Vietnam war 1/35
AFV AF35291
66,95€■ New tooling parts for Australian Army M113 APC ‘Nam period.
■ Brand new Australian Army M113 APC configured top deck.
■ New T50 turret with internal details.
■ All New Australian Army infantry weapon set in VN War period.
■ New decal and painting instruction for units served in VN War period.
■ Nuevas piezas de herramientas para el período Nam del Ejército Australiano M113 APC ‘.
■ Cubierta superior configurada APC M113 del ejército australiano completamente nueva.
■ Nueva torreta T50 con detalles internos.
■ Todas las nuevas armas de infantería del ejército australiano ambientadas en el período de la Guerra VN.
■ Nuevas instrucciones de pintura y calcomanías para las unidades que sirvieron en el período de la Guerra VN.
The Battle of Midway – US Navy Pilot 1942
YM YM1890
54,60€Title : [YM1890] The Battle of MIDWAY- US NAVY PILOT 1942
Size : 1/10 Scale
Material : Resin
Weight : 150g
Pieces : 5
Sculpted by Young B Song
Painted by Kirill Kanaev
Título: [YM1890] La batalla de MIDWAY – PILOTO DE LA MARINA DE EE. UU. 1942
Tamaño: escala 1/10
Material: resina
Peso: 150g
Piezas: 5
Esculpido por Young B Song
Pintado por Kirill Kanaev
Italian Paratroopers ‘Nembo Division’ WW II 1/35
TB 35129
27,00€2 figures.
Sculpted by Marco Pezzotti
Boxart painted by Fabrizio Marini
2 figuras.
Esculpido por Marco Pezzotti
Boxart pintado por Fabrizio Marini
MM MT-003
115,75€Front & rear shock absorbers and the steering damper are movable
Metalic Fuel Tank, Seat Hump Cover and engine cylinder
Viny seats and backrest realistic as real motorcycle
Stainless steel PE Parts and pre colored PE Parts
All light represented by clear parts
*Scale 1/9
Los amortiguadores delanteros y traseros y el amortiguador de dirección son móviles
Tanque de combustible metálico, cubierta de la joroba del asiento y cilindro del motor
Asientos y respaldo de vinilo realistas como una motocicleta real.
Piezas de PE de acero inoxidable y piezas de PE precoloreadas
Toda la luz representada por partes claras
* Escala 1/9
TAM35292
34,95€After WWI, Germany pushed forward the development of battle tanks under a blanket of secrecy.
The Panzerkampfwagen II used the Panzerkampfwagen I”s hull and came armed with a
2cm main gun. Mass production of the Ausf.A began in 1937 and various improvements including
a new suspension led to the Ausf.C. Until the end of production in April 1940, 1088 Panzer II
tanks were manufactured. They led the surprise invasion on Poland and were the main tanks
used in the attack on France. Later, they were successfully used in reconnaissance missions
until the end of the war.
Después de la Primera Guerra Mundial, Alemania impulsó el desarrollo de tanques de batalla bajo un manto de secreto.
El Panzerkampfwagen II usó el casco del Panzerkampfwagen I y vino armado con un
Cañón principal de 2 cm. La producción en masa del Ausf.A comenzó en 1937 y varias mejoras, incluidas
una nueva suspensión llevó al Ausf.C. Hasta el final de la producción en abril de 1940, 1088 Panzer II
se fabricaron tanques. Lideraron la invasión sorpresa de Polonia y fueron los principales tanques.
utilizado en el ataque a Francia. Más tarde, se utilizaron con éxito en misiones de reconocimiento.
hasta el final de la guerra.
Modern US M1A2 Tankcrew boresighting (included 3D printed M27a3 part)
DEF DF35028
18,20€
TB 35082
27,00€2 figures.
Sculpted by Krisztian Bodi
Boxart painted by Juan Antonio Pérez Marchante
2 figuras.
Esculpido por Krisztian Bodi
Boxart pintado por Juan Antonio Pérez Marchante
CSM 35008
45,95€From the late Thirties until the outbreak of WWII, near all of the Lancias were allotted to reserve and/or second-line units or depots (even in North Africa). Although some weaknesses were noted, the Lancias were considered suitable for their role. At the beginning of WW II, the Italian Army had on hand approximately 62 Lancia 1915 and 1917 pattern armoured cars, some were re-armed with Fiat14/35 machine guns and a few others with Breda Safat 7.7 mm – a good weapon from Regia Aeronautica (Italian Air Force) stocks. Only in the very later part of 30’s some progress had been made in the general direction of mechanization.
Very few Lancias saw action during the early years of the war, as it rapidly became obvious that their thin armour and poor armament could not face enemy weaponry with immunity. The outbreak of the war in June of 1940 found the Italian armoured units in AOI (Italian East Africa) almost completely unprepared, even for her own defence. Between the few armoured vehicles present in the country were few Lancias
However, the vehicle remained in service throughout the war, until 1943. Only six Lancias were in the armoured car platoon of the ‘Battaglione Misto Egeo’ (Mixed Battalion, Aegean) at the Psito barracks on the island of Rhodes, under the command of the Italian ‘Regina’ infantry division. They took part in the confusing events of the armistice in September 1943 and in the confrontation with the Germans, but the crews had to sabotage their vehicles to prevent them from falling into German hands. A few of the armoured cars were lost in the Balkans, but records are scanty. Others vehicles were seized by the Germans after Italy switched sides in 1943 and given the designation of Panzerspähwagen 1ZM (I). They were used almost entirely from February 1944 around Abbazia and Fiume for anti-partisan duties, where their lack of armor protection and firepower would not be as critical. IN 1945 the Lancias was employed in North-East Italy.
Desde finales de los años treinta hasta el estallido de la Segunda Guerra Mundial, casi todas las Lancias fueron asignadas a unidades o depósitos de reserva y / o de segunda línea (incluso en el norte de África). Aunque se observaron algunas debilidades, los Lancia se consideraron adecuados para su función. Al comienzo de la Segunda Guerra Mundial, el ejército italiano tenía a mano aproximadamente 62 carros blindados Lancia 1915 y 1917, algunos fueron armados nuevamente con ametralladoras Fiat14 / 35 y algunos otros con Breda Safat 7.7 mm, una buena arma de la Regia Aeronautica. Acciones (Fuerza Aérea Italiana). Sólo en la última parte de los años 30 se habían realizado algunos avances en la dirección general de la mecanización.
Muy pocos Lancias vieron acción durante los primeros años de la guerra, ya que rápidamente se hizo evidente que su delgada armadura y su pobre armamento no podían enfrentar el armamento enemigo con inmunidad. El estallido de la guerra en junio de 1940 encontró a las unidades blindadas italianas en AOI (África Oriental Italiana) casi completamente desprevenidas, incluso para su propia defensa. Entre los pocos vehículos blindados presentes en el país se encontraban pocos Lancias
Sin embargo, el vehículo permaneció en servicio durante toda la guerra, hasta 1943. Solo seis Lancias estaban en el pelotón de vehículos blindados del ‘Battaglione Misto Egeo’ (Batallón Mixto, Egeo) en el cuartel de Psito en la isla de Rodas, bajo el mando de la división de infantería italiana “Regina”. Participaron en los confusos hechos del armisticio de septiembre de 1943 y en el enfrentamiento con los alemanes, pero las tripulaciones tuvieron que sabotear sus vehículos para evitar que cayeran en manos alemanas. Algunos de los vehículos blindados se perdieron en los Balcanes, pero los registros son escasos. Otros vehículos fueron incautados por los alemanes después de que Italia cambiara de bando en 1943 y recibieran la designación de Panzerspähwagen 1ZM (I). Se utilizaron casi en su totalidad desde febrero de 1944 en Abbazia y Fiume para tareas antipartisanas, donde su falta de protección de armadura y potencia de fuego no sería tan crítica. EN 1945, los Lancia se emplearon en el noreste de Italia.
WWII German Pz.III 5cm L/60 barrel (for PZ.III Ausf.L/M 1/35)
DEF DM35117
4,60€
1/48 Boeing F/A-18F Super Hornet
MM LS-013
72,50€As the latest F / A-18 variants, the F / A-18E / F aircraft have greatly improved electronic equipment and extended combat radius. To perform the missions like air superiority and ground attack and complex tasks including reconnaissance and electronic warfare, the F / A-18F’s rear cockpit weapon systems operator has new advanced cockpit displays and control system. The pilot and the weapon systems operator can perform air-to-air and air-to-ground tasks at the same time. Before the next-generation carrier-based fighters enter service, the F / A-18F will still be the main combat aircraft of the U.S. aircraft carrier battle group.
MENG releases this brand-new LS-013 Boeing F/A-18E Super Hornet model kit licensed by The Boeing Company. The finished model will be 377.9mm long and 273.4mm wide. This kit includes pre-cut stainless steel PE parts and pre-cut painting masks.
LS-013 Boeing F/A-18F Super Hornet
Scale: 1/48
Release in: July 2021
Flaps and slats can be installed in retracted or deployed positions.
Horizontal stabilizers and rudders are movable.
The two-seat variant’s cockpit and cockpit interior equipment are precisely replicated.
The specially designed pluggable main pylons allow the easy change of weapons; this kit includes AGM-65 air-to-ground missiles and GBU-16 laser-guided bombs.
Two U.S. Navy pilot figures featuring realistic gestures and finely replicated suit and equipment are included. Two flight helmet options are provided.
This kit includes optional exterior parts.
Como las últimas variantes del F / A-18, los aviones F / A-18E / F tienen equipos electrónicos muy mejorados y un radio de combate extendido. Para realizar misiones como superioridad aérea y ataque terrestre y tareas complejas que incluyen reconocimiento y guerra electrónica, el operador de sistemas de armas de la cabina trasera del F / A-18F tiene nuevas pantallas de cabina y un sistema de control avanzados. El piloto y el operador de sistemas de armas pueden realizar tareas aire-aire y aire-tierra al mismo tiempo. Antes de que los cazas basados en portaaviones de próxima generación entren en servicio, el F / A-18F seguirá siendo el principal avión de combate del grupo de batalla de portaaviones de EE. UU.
MENG lanza este nuevo kit modelo LS-013 Boeing F / A-18E Super Hornet con licencia de The Boeing Company. El modelo terminado tendrá 377,9 mm de largo y 273,4 mm de ancho. Este kit incluye piezas de PE de acero inoxidable precortadas y máscaras de pintura precortadas.
LS-013 Boeing F / A-18F Super Hornet
Escala: 1/48
Lanzamiento: julio de 2021
Las aletas y las lamas se pueden instalar en posiciones retraídas o desplegadas.
Los timones y estabilizadores horizontales son móviles.
La cabina del piloto y el equipamiento interior de la cabina de la variante de dos asientos se reproducen con precisión.
Los pilones principales enchufables especialmente diseñados permiten el cambio fácil de armas; este kit incluye misiles aire-tierra AGM-65 y bombas guiadas por láser GBU-16.
Se incluyen dos figuras de piloto de la Marina de los EE. UU. Con gestos realistas y un traje y equipo finamente replicados. Se proporcionan dos opciones de casco de vuelo.
Este kit incluye piezas exteriores opcionales.
Cookie | Duration | Description |
---|---|---|
PHPSESSID | session | This cookie is native to PHP applications. The cookie is used to store and identify a users' unique session ID for the purpose of managing user session on the website. The cookie is a session cookies and is deleted when all the browser windows are closed. |
viewed_cookie_policy | 1 year | The cookie is set by the GDPR Cookie Consent plugin to store whether or not the user has consented to the use of cookies. It does not store any personal data. |
Cookie | Duration | Description |
---|---|---|
pelm_last_loaded_shop_type | 1 month | No description available. |
woocommerce_recently_viewed | session | Description unavailable. |
wp_woocommerce_session_9205d68996927145eedf8afcab99571e | 2 days | No description |
yith_wcwl_session_9205d68996927145eedf8afcab99571e | 1 month | No description |
Cookie | Duration | Description |
---|---|---|
_fbp | 3 months | This cookie is set by Facebook to display advertisements when either on Facebook or on a digital platform powered by Facebook advertising, after visiting the website. |
fr | 3 months | Facebook sets this cookie to show relevant advertisements to users by tracking user behaviour across the web, on sites that have Facebook pixel or Facebook social plugin. |
loc | 1 year 1 month | AddThis sets this geolocation cookie to help understand the location of users who share the information. |
VISITOR_INFO1_LIVE | 5 months 27 days | A cookie set by YouTube to measure bandwidth that determines whether the user gets the new or old player interface. |
YSC | session | YSC cookie is set by Youtube and is used to track the views of embedded videos on Youtube pages. |
yt-remote-connected-devices | never | YouTube sets this cookie to store the video preferences of the user using embedded YouTube video. |
yt-remote-device-id | never | YouTube sets this cookie to store the video preferences of the user using embedded YouTube video. |
yt.innertube::nextId | never | This cookie, set by YouTube, registers a unique ID to store data on what videos from YouTube the user has seen. |
yt.innertube::requests | never | This cookie, set by YouTube, registers a unique ID to store data on what videos from YouTube the user has seen. |
Cookie | Duration | Description |
---|---|---|
_ga | 2 years | The _ga cookie, installed by Google Analytics, calculates visitor, session and campaign data and also keeps track of site usage for the site's analytics report. The cookie stores information anonymously and assigns a randomly generated number to recognize unique visitors. |
_ga_BK3V7Y3VZB | 2 years | This cookie is installed by Google Analytics. |
_gat_gtag_UA_105576964_1 | 1 minute | Set by Google to distinguish users. |
_gid | 1 day | Installed by Google Analytics, _gid cookie stores information on how visitors use a website, while also creating an analytics report of the website's performance. Some of the data that are collected include the number of visitors, their source, and the pages they visit anonymously. |
at-rand | never | AddThis sets this cookie to track page visits, sources of traffic and share counts. |
CONSENT | 2 years | YouTube sets this cookie via embedded youtube-videos and registers anonymous statistical data. |
uvc | 1 year 1 month | Set by addthis.com to determine the usage of addthis.com service. |
Cookie | Duration | Description |
---|---|---|
pll_language | 1 year | The pll _language cookie is used by Polylang to remember the language selected by the user when returning to the website, and also to get the language information when not available in another way. |