Weight | 0.15 kg |
---|---|
Dimensions | 20 × 15 × 10 cm |
AK Points
Out of stock : Fuera de Stock
Notify me || Avísame
82,95€
1/12 scale full figure
Unassembled and unpainted kit
Pieces – 18 parts
Sculpted and painted by Sang Eon Lee
Figura completa a escala 1/12
Kit sin montar y sin pintar
Piezas – 18 piezas
Esculpido y pintado por Sang Eon Lee
Weight | 0.15 kg |
---|---|
Dimensions | 20 × 15 × 10 cm |
AK183
5,25€The original one.
A high quality ultra matte varnish which can be applied with a brush or an airbrush to achieve a dead flat finish on any surface.
Acrylic Ultra Matte Varnish formulated for maximum airbrush performance. Water soluble, odorless, and non-toxic. Shake before each use. We recommend AK-712 Acrylic Thinner for thinning. Dries completely in 12 hours.
60 ml.
El Original.
Barniz ultra mate de alta calidad que puede ser aplicado con pincel o con aerógrafo para lograr un acabado mate en cualquier superficie.
Nuestro barniz ultra mate acrílico está formulado para el máximo rendimiento del aerógrafo. Soluble en agua, inodoro y no tóxico. Agitar antes de cada uso. Recomendamos AK-712 Acrylic Thinner para diluir. Se seca completamente en 12 horas.
60 ml.
AK9009
9,90€Precision cutting pliers with an ergonomic handle covered with an orange non-slip vinyl foam, with a spring return.
They make a clean and precise cut. No need to touch up.
Suitable for parts or rods of plastic, PVC, resin or ABS less than 4mm.
Do not use to cut metal parts.
Alicates de corte de precisión con mango ergonómico cubierto con espuma de vinilo naranja, antideslizante y con muelle de retorno.
Realizan un corte limpio y preciso sin que sea necesario retocar.
Adecuado para piezas o varillas de plástico, PVC, resina o ABS menores de 4mm.
No utilizar para cortar piezas de metal.
MAGNET ULTRA RESISTANT CYANOCRYLATE GLUE
AK12015
7,60€20g.
General-purpose cyanoacrylate 401. Fast drying, extra strong, low viscosity, specially formulated for adhesion between materials that can even have an acidic surface. Can be used with rubber, leather, wood, metal, resin and plastic. The surfaces to be joined must be free of dirt, dust and grease. A small amount of adhesive should be applied; more cyanoacrylate does not guarantee a better bond and makes more difficult the drying of the adhesive that is effective for bonding.
– 99% Cyano.
– Ethyl cyanoacrylate
– Use temperature: -55º to 120º
– Set time: between 3 and 10 seconds. The gaps and uneven surfaces can increase this setting time. It is not necessary to use clamps. Holding the pieces firmly for 10-30 seconds will ensure better adhesion.
– Definitive cure time: 24 h
– Viscosity: 110 mPa.S
– Shear strength: 21.0 MPa
* Bottles are not filled at a 100% to leave some air and make it work properly.
20g.
Cianoacrilato de uso general 401, secado rápido, extra fuerte, baja viscosidad especialmente formulado para la adhesión entre materiales que incluso pueden tener una superficie ácida. Se puede usar con caucho, cuero, madera, metal, resina y plástico. Las superficies a unir deben estar libres de suciedad, polvo y grasa. Se debe aplicar una pequeña cantidad de adhesivo; más cianoacrilato no garantiza una mejor unión y hace más difícil el secado del adhesivo que es efectivo para la unión.
– 99% Cyano
– Cianoacrilato de etilo
– Temperatura de uso: -55º a 120º
– Tiempo de fraguado: entre 3 y 10 segundos. Los huecos y las superficies irregulares pueden aumentar este tiempo de fraguado. No es necesario usar abrazaderas. Sostener las piezas firmemente durante 10-30 segundos asegurará una mejor adhesión.
– Tiempo de curado definitivo: 24 h.
– Viscosidad: 110 mPa.S
– Resistencia al corte: 21.0 MPa
*Las botellas no se llenan al 100% para dejar algo de aire y que funcione correctamente.
AK8064
12,75€The Wet Palette is a tool mainly used by figure painters, but more and more it is being used by people that paint with acrylics any kind of model. It will extend the useful life of any acrylic so that it can be used for hours and once shut it will preserve the colors and color mixtures. It can be kept in the fridge.
It has three components:
1.Sponge, to hold large quantities of water, since it is quite thick.
2.Cloth made of fiber, placed on top of the sponge as a leveler, humidity filter, and as an interchangeable element in case of stains or if not used for a long time.
3.High quality special Paper, made of a fine silicone film, allows the transfer of humidity but prevents water forming and paints from dissolving, and does not give off any fibers not hairs when worked with the brushes.
The Wet Palette is watertight and airtight, made of the same material of marine containers for flares, charts, and medicines. Its locks guarantee the seal. This extends the life of paints, especially in Summer, hot climates, and under extreme conditions.
*Dimensions: 16 x 13 x 4 cm.
It contains:
?· Need more info? Click here
La paleta húmeda es una herramienta utilizada principalmente por los pintores de figuras, pero cada vez más es utilizada por las personas que pintan con acrílicos cualquier tipo de modelo. Prolonga la vida útil de cualquier acrílico para que pueda ser utilizado durante horas y, una vez cerrado, conserva los colores y las mezclas de colores. Se puede conservar en la nevera.
Tiene tres componentes:
1.Esponja, para retener grandes cantidades de agua, ya que es bastante gruesa.
2.Paño de fibra, colocado encima de la esponja como nivelador, filtro de humedad, y como elemento intercambiable en caso de manchas o si no se utiliza durante mucho tiempo.
3.Papel especial de alta calidad, hecho de una fina película de silicona, permite la transferencia de humedad pero evita que se forme agua y que se disuelvan las pinturas, y no desprende fibras ni pelos cuando se trabaja con los pinceles.
La paleta húmeda es estanca y hermética, fabricada con el mismo material de los contenedores marinos para bengalas, cartas de navegación y medicamentos. Sus cierres garantizan la estanqueidad. Esto prolonga la vida de las pinturas, especialmente en verano, en climas cálidos y en condiciones extremas.
*Dimensiones: 16 x 13 x 4 cm.
Contiene:
¿Necesita más información? Haga clic aquí
FA 614
18,95€A set designed for thorough cleaning of any airbrush.
A glass jar with a plastic screw cap is used to purge the airbrush with the cleaner after each use. Thanks to a special filter in the upper part, all impurities and liquid remain in the container. Additionally, the lid is equipped with an airbrush stand.
Cleaners and rods are used to thoroughly clean various elements of airbrushes: tips, nozzles, bodies and other elements. The needle, on the other hand, cleans the inside of the airbrush nozzle or other internal parts of the airbrush, such as the needle guide channel.
Container Height: 85mm, diameter: 100mm.
Un conjunto diseñado para la limpieza a fondo de cualquier aerógrafo.
Se usa un frasco de vidrio con un tapón de rosca de plástico para purgar el aerógrafo con el limpiador después de cada uso. Gracias a un filtro especial en la parte superior, todas las impurezas y líquidos permanecen en el recipiente. Además, la tapa está equipada con un soporte para aerógrafo.
Los limpiadores y las varillas se utilizan para limpiar a fondo varios elementos de los aerógrafos: puntas, boquillas, cuerpos y otros elementos. La aguja, por otro lado, limpia el interior de la boquilla del aerógrafo u otras partes internas del aerógrafo, como el canal de guía de la aguja.
Altura del contenedor: 85 mm, diámetro: 100 mm.
AK050
5,90€Our odorless turpentine is very different from our white spirit. Besides being odorless, this product is softer and less aggressive than our White Spirit. This property of the odorless thinner (Turpentine) makes it great for delicate, soft and subtle blending. This thinner is exclusive to enamel and oil paint. This larger bottle gives you more thinner and costs less when compared to buying three 35ml bottles.
100 ml.
Nuestra trementina inodora es muy diferente de nuestro white spirit. Además de ser inodoro, este producto es más suave y menos agresivo que nuestro White Spirit. Esta propiedad del diluyente inodoro (Turpentine) lo hace ideal para mezclas delicadas, suaves y sutiles. Este diluyente es exclusivo para esmalte y pintura al óleo. Esta botella más grande le proporciona más diluyente y cuesta menos en comparación con la compra de tres botellas de 35 ml.
100 ml.
FIGURES F.A.Q. – FIGURE PAINTING TECHNIQUES – THE COMPLETE GUIDE FOR FIGURE SCALE MODELERS
74,90€
English / Spanish. 488 pages. Semi Hard Cover.
ARE YOU READY TO IMPROVE YOUR PAINTING METHODS AND CHANGE THE FINISH OF YOUR FIGURES FOREVER?
In this book you will find advice and explanation of all techniques and processes which you need to master painting of all types of figures, provided by the best painter of all time: Master Kirill Kanaev.
This guide through the world of figures is a unique book, full of impressive works and examples used to demonstrate the secrets of miniature painting from the basic pillars to the most complex techniques.
Now we put this knowledge in your hands to allow you to become a high level painter.
Ingles Español. 488 páginas. Cubierta semi dura.
¿ESTÁS LISTO PARA MEJORAR TUS MÉTODOS DE PINTURA Y CAMBIAR EL ACABADO DE TUS FIGURAS PARA SIEMPRE?
En este libro encontrarás consejos y explicaciones de todas las técnicas y procesos que necesitas para dominar la pintura de todo tipo de figuras, proporcionados por el mejor pintor de todos los tiempos: el Maestro Kirill Kanaev.
Esta guía por el mundo de las figuras es un libro único, lleno de impresionantes obras y ejemplos que se utilizan para demostrar los secretos de la pintura en miniatura desde los pilares básicos hasta las técnicas más complejas.
Ahora ponemos este conocimiento en tus manos para que puedas convertirte en un pintor de alto nivel.
ABT114
6,50€For precision works is necessary to keep the tip of your brushes in a perfect state. This gel is indicated to keep the tip sharp and in perfect use condition with all brushes fibers compacted and never open or deformed. With this gel you will keep your brushes always like new ones after using and cleaning them (it can be used after the application of our ABT117 Magic Potion for Brushes or any other chemical or natural cleaner).
Para trabajos de precisión es necesario mantener la punta de sus pinceles en perfecto estado. Este gel está indicado para mantener la punta afilada y en perfecto estado de uso con todas las fibras de los pinceles compactadas y nunca abiertas o deformadas. Con este gel mantendrá sus pinceles siempre como nuevos después de usarlos y limpiarlos (se puede utilizar después de la aplicación de nuestra Poción Mágica para Pinceles ABT117 o cualquier otro limpiador químico o natural).
TOP LINE DELUXE Marta Kolinsky KIT
ABT850
78,75€AK9204
6,50€ENGLISH
AK183
5,25€The original one.
A high quality ultra matte varnish which can be applied with a brush or an airbrush to achieve a dead flat finish on any surface.
Acrylic Ultra Matte Varnish formulated for maximum airbrush performance. Water soluble, odorless, and non-toxic. Shake before each use. We recommend AK-712 Acrylic Thinner for thinning. Dries completely in 12 hours.
60 ml.
El Original.
Barniz ultra mate de alta calidad que puede ser aplicado con pincel o con aerógrafo para lograr un acabado mate en cualquier superficie.
Nuestro barniz ultra mate acrílico está formulado para el máximo rendimiento del aerógrafo. Soluble en agua, inodoro y no tóxico. Agitar antes de cada uso. Recomendamos AK-712 Acrylic Thinner para diluir. Se seca completamente en 12 horas.
60 ml.
AK9009
9,90€Precision cutting pliers with an ergonomic handle covered with an orange non-slip vinyl foam, with a spring return.
They make a clean and precise cut. No need to touch up.
Suitable for parts or rods of plastic, PVC, resin or ABS less than 4mm.
Do not use to cut metal parts.
Alicates de corte de precisión con mango ergonómico cubierto con espuma de vinilo naranja, antideslizante y con muelle de retorno.
Realizan un corte limpio y preciso sin que sea necesario retocar.
Adecuado para piezas o varillas de plástico, PVC, resina o ABS menores de 4mm.
No utilizar para cortar piezas de metal.
MAGNET ULTRA RESISTANT CYANOCRYLATE GLUE
AK12015
7,60€20g.
General-purpose cyanoacrylate 401. Fast drying, extra strong, low viscosity, specially formulated for adhesion between materials that can even have an acidic surface. Can be used with rubber, leather, wood, metal, resin and plastic. The surfaces to be joined must be free of dirt, dust and grease. A small amount of adhesive should be applied; more cyanoacrylate does not guarantee a better bond and makes more difficult the drying of the adhesive that is effective for bonding.
– 99% Cyano.
– Ethyl cyanoacrylate
– Use temperature: -55º to 120º
– Set time: between 3 and 10 seconds. The gaps and uneven surfaces can increase this setting time. It is not necessary to use clamps. Holding the pieces firmly for 10-30 seconds will ensure better adhesion.
– Definitive cure time: 24 h
– Viscosity: 110 mPa.S
– Shear strength: 21.0 MPa
* Bottles are not filled at a 100% to leave some air and make it work properly.
20g.
Cianoacrilato de uso general 401, secado rápido, extra fuerte, baja viscosidad especialmente formulado para la adhesión entre materiales que incluso pueden tener una superficie ácida. Se puede usar con caucho, cuero, madera, metal, resina y plástico. Las superficies a unir deben estar libres de suciedad, polvo y grasa. Se debe aplicar una pequeña cantidad de adhesivo; más cianoacrilato no garantiza una mejor unión y hace más difícil el secado del adhesivo que es efectivo para la unión.
– 99% Cyano
– Cianoacrilato de etilo
– Temperatura de uso: -55º a 120º
– Tiempo de fraguado: entre 3 y 10 segundos. Los huecos y las superficies irregulares pueden aumentar este tiempo de fraguado. No es necesario usar abrazaderas. Sostener las piezas firmemente durante 10-30 segundos asegurará una mejor adhesión.
– Tiempo de curado definitivo: 24 h.
– Viscosidad: 110 mPa.S
– Resistencia al corte: 21.0 MPa
*Las botellas no se llenan al 100% para dejar algo de aire y que funcione correctamente.
AK8064
12,75€The Wet Palette is a tool mainly used by figure painters, but more and more it is being used by people that paint with acrylics any kind of model. It will extend the useful life of any acrylic so that it can be used for hours and once shut it will preserve the colors and color mixtures. It can be kept in the fridge.
It has three components:
1.Sponge, to hold large quantities of water, since it is quite thick.
2.Cloth made of fiber, placed on top of the sponge as a leveler, humidity filter, and as an interchangeable element in case of stains or if not used for a long time.
3.High quality special Paper, made of a fine silicone film, allows the transfer of humidity but prevents water forming and paints from dissolving, and does not give off any fibers not hairs when worked with the brushes.
The Wet Palette is watertight and airtight, made of the same material of marine containers for flares, charts, and medicines. Its locks guarantee the seal. This extends the life of paints, especially in Summer, hot climates, and under extreme conditions.
*Dimensions: 16 x 13 x 4 cm.
It contains:
?· Need more info? Click here
La paleta húmeda es una herramienta utilizada principalmente por los pintores de figuras, pero cada vez más es utilizada por las personas que pintan con acrílicos cualquier tipo de modelo. Prolonga la vida útil de cualquier acrílico para que pueda ser utilizado durante horas y, una vez cerrado, conserva los colores y las mezclas de colores. Se puede conservar en la nevera.
Tiene tres componentes:
1.Esponja, para retener grandes cantidades de agua, ya que es bastante gruesa.
2.Paño de fibra, colocado encima de la esponja como nivelador, filtro de humedad, y como elemento intercambiable en caso de manchas o si no se utiliza durante mucho tiempo.
3.Papel especial de alta calidad, hecho de una fina película de silicona, permite la transferencia de humedad pero evita que se forme agua y que se disuelvan las pinturas, y no desprende fibras ni pelos cuando se trabaja con los pinceles.
La paleta húmeda es estanca y hermética, fabricada con el mismo material de los contenedores marinos para bengalas, cartas de navegación y medicamentos. Sus cierres garantizan la estanqueidad. Esto prolonga la vida de las pinturas, especialmente en verano, en climas cálidos y en condiciones extremas.
*Dimensiones: 16 x 13 x 4 cm.
Contiene:
¿Necesita más información? Haga clic aquí
FA 614
18,95€A set designed for thorough cleaning of any airbrush.
A glass jar with a plastic screw cap is used to purge the airbrush with the cleaner after each use. Thanks to a special filter in the upper part, all impurities and liquid remain in the container. Additionally, the lid is equipped with an airbrush stand.
Cleaners and rods are used to thoroughly clean various elements of airbrushes: tips, nozzles, bodies and other elements. The needle, on the other hand, cleans the inside of the airbrush nozzle or other internal parts of the airbrush, such as the needle guide channel.
Container Height: 85mm, diameter: 100mm.
Un conjunto diseñado para la limpieza a fondo de cualquier aerógrafo.
Se usa un frasco de vidrio con un tapón de rosca de plástico para purgar el aerógrafo con el limpiador después de cada uso. Gracias a un filtro especial en la parte superior, todas las impurezas y líquidos permanecen en el recipiente. Además, la tapa está equipada con un soporte para aerógrafo.
Los limpiadores y las varillas se utilizan para limpiar a fondo varios elementos de los aerógrafos: puntas, boquillas, cuerpos y otros elementos. La aguja, por otro lado, limpia el interior de la boquilla del aerógrafo u otras partes internas del aerógrafo, como el canal de guía de la aguja.
Altura del contenedor: 85 mm, diámetro: 100 mm.
AK050
5,90€Our odorless turpentine is very different from our white spirit. Besides being odorless, this product is softer and less aggressive than our White Spirit. This property of the odorless thinner (Turpentine) makes it great for delicate, soft and subtle blending. This thinner is exclusive to enamel and oil paint. This larger bottle gives you more thinner and costs less when compared to buying three 35ml bottles.
100 ml.
Nuestra trementina inodora es muy diferente de nuestro white spirit. Además de ser inodoro, este producto es más suave y menos agresivo que nuestro White Spirit. Esta propiedad del diluyente inodoro (Turpentine) lo hace ideal para mezclas delicadas, suaves y sutiles. Este diluyente es exclusivo para esmalte y pintura al óleo. Esta botella más grande le proporciona más diluyente y cuesta menos en comparación con la compra de tres botellas de 35 ml.
100 ml.
ED82121
34,50€ProfiPACK edition kit of British WWII fighter aircraft Tempest Mk.V in 1/48 scale.
The kit offers the aircraft manufactured within Series 1.
plastic parts: Eduard
No. of decal options: 6
decals: Cartograf
PE parts: yes, pre-painted
painting mask: yes
resin parts: no
Kit de edición ProfiPACK del avión de combate británico de la Segunda Guerra Mundial Tempest Mk.V en escala 1/48.
El kit ofrece el avión fabricado dentro de la Serie 1.
piezas de plástico: Eduard
No de opciones de calcas: 6
calcas: Cartograf
Piezas de PE: sí, prepintadas
máscara de pintura: sí
piezas de resina: no
G4 with armament, WWII German Car 1/35
ICM 35530
33,95€The three-axle G4 passenger car was designed by Daimler-Benz in 1934 and was produced until 1939. This heavy six-seater off-road vehicle with an eight-cylinder engine with an output of 100 (later 110) hp was designed for high-ranking officials of the Third Reich, as well as for the army, where it was used as a staff car (under the designation Kfz.21). The G4 was produced as a four-door sedan with a folding roof. This car was too complex and expensive for mass production, so it was made in a relatively small quantity.
Some trucks were equipped with MG 34 machine guns. They served to transport high command staff of the Wehrmacht, as well as guards and escorts. Vehicles in this variant were called Partisanenwagen.
El automóvil de pasajeros G4 de tres ejes fue diseñado por Daimler-Benz en 1934 y se fabricó hasta 1939. Este pesado vehículo todoterreno de seis plazas con un motor de ocho cilindros con una potencia de 100 (luego 110) hp fue diseñado para altas -funcionarios de rango del Tercer Reich, así como para el ejército, donde se usó como automóvil del estado mayor (bajo la designación Kfz.21). El G4 se fabricó como un sedán de cuatro puertas con techo plegable. Este automóvil era demasiado complejo y costoso para la producción en masa, por lo que se fabricó en una cantidad relativamente pequeña.
Algunos camiones estaban equipados con ametralladoras MG 34. Sirvieron para transportar personal de alto mando de la Wehrmacht, así como guardias y escoltas. Los vehículos de esta variante se llamaron Partisanenwagen.
Escala
1:35
Periodo de tiempo
WW2
Tamaño del modelo (largo x alto)
158 x 54 mm
Tamaño de caja
295 x 225 x 40 mm
Numero de detalles
307 + 20
AH-1G Cobra (late production), US Attack Helicopter 1/32
ICM 32061
73,95€The AH-1G combat helicopter has conceived as a fire support helicopter. Due to its firepower, the term “aerial artillery” coined during the Vietnam War, was often applied to it. The main armament mounted on a turret in the nose part of the helicopter was a six-barreled Minigun 7.62 mm machine gun with a clip of 4,000 rounds and an M129 40 mm grenade launcher with 300 rounds of ammunition. Other types of weapons also were used.
In 1972, the Vietnamese began to use the Soviet “Strela” man-portable anti-aircraft system to attack low-flying targets. They were very successful against helicopters, including Cobras. Some helicopters were equipped with a device that diverted hot gases from the working engine upwards to protect them from the homing heads mounted on the Arrows. And as practice showed, this had the necessary effect. To capture helicopters modified in this way, the sensitivity of the Arrow’s homing head was insufficient.
During the war in Southeast Asia, the Cobras demonstrated excellent survivability and proved themselves to be a reliable and powerful ground support aircraft.
Scale
1:32
Time period
After 1950
Model size (length x width)
422 x 106 mm
Box size
410 x 260 x 100 mm
Number of details
241
El helicóptero de combate AH-1G se ha concebido como un helicóptero de apoyo contra incendios. Debido a su potencia de fuego, el término “artillería aérea”, acuñado durante la Guerra de Vietnam, se le aplicó a menudo. El armamento principal montado en una torreta en la parte delantera del helicóptero era una ametralladora Minigun de 7,62 mm de seis cañones con un cargador de 4.000 rondas y un lanzagranadas M129 de 40 mm con 300 rondas de munición. También se utilizaron otros tipos de armas.
En 1972, los vietnamitas comenzaron a utilizar el sistema antiaéreo portátil “Strela” soviético para atacar objetivos en vuelo bajo. Tuvieron mucho éxito contra helicópteros, incluidos Cobras. Algunos helicópteros estaban equipados con un dispositivo que desviaba los gases calientes del motor en funcionamiento hacia arriba para protegerlos de los cabezales de retorno montados en los Arrows. Y como demostró la práctica, esto tuvo el efecto necesario. Para capturar helicópteros modificados de esta manera, la sensibilidad de la cabeza de retorno del Arrow fue insuficiente.
Durante la guerra en el sudeste asiático, los Cobras demostraron una excelente capacidad de supervivencia y demostraron ser un avión de apoyo terrestre confiable y poderoso.
Escala
1:32
Periodo de tiempo
Después de 1950
Tamaño del modelo (largo x ancho)
422 x 106 mm
Tamaño de caja
410 x 260 x 100 mm
Numero de detalles
241
AFV AF35328
45,50€■ Centurion MK 5/1 glacis armour.
■ Front and rear mudguards.
■ Model A Ordnance QF 20-pounder.
■ Model B Ordnance QF 20-pounder.
■ One piece road wheels.
■ Searchlight.
■ Rearview mirror.
■ Decals for Centurion MK 5 and Centurion MK 5/1 in BOAR liveries.
■ Armadura glacis Centurion MK 5/1.
■ Guardabarros delantero y trasero.
■ Modelo A Artillería QF de 20 libras.
■ Artillería modelo B QF de 20 libras.
■ Ruedas de carretera de una pieza.
■ Reflector.
■ Espejo retrovisor.
■ Calcomanías para Centurion MK 5 y Centurion MK 5/1 en colores BOAR.
Australian army M113A1 APC with T50 turret Vietnam war 1/35
AFV AF35291
66,95€■ New tooling parts for Australian Army M113 APC ‘Nam period.
■ Brand new Australian Army M113 APC configured top deck.
■ New T50 turret with internal details.
■ All New Australian Army infantry weapon set in VN War period.
■ New decal and painting instruction for units served in VN War period.
■ Nuevas piezas de herramientas para el período Nam del Ejército Australiano M113 APC ‘.
■ Cubierta superior configurada APC M113 del ejército australiano completamente nueva.
■ Nueva torreta T50 con detalles internos.
■ Todas las nuevas armas de infantería del ejército australiano ambientadas en el período de la Guerra VN.
■ Nuevas instrucciones de pintura y calcomanías para las unidades que sirvieron en el período de la Guerra VN.
RTD35661
9,99€WWII Series – 3D Resin Printed
High-detailed 3D Resin Printed Set.
Serie WWII – Resina impresa en 3D
Conjunto impreso en resina 3D de gran detalle.
ED7059
13,50€ProfiPACK edition kit of Soviet Cold War jet aircraft MiG-15bis in 1/72 scale.
Kit de edición ProfiPACK del avión de reacción MiG-15bis de la Guerra Fría soviética en escala 1/72.
HUSKY MK. III VMMD W/Interrogation arm 1/35
AFV AF35354
72,50€■ Highly detailed forward mounted interrogation arm.
■ Decals for Husky MK III with interrogation arm configuration.
■ Brazo de interrogación montado en la parte delantera altamente detallado.
■ Calcomanías para Husky MK III con configuración de brazo de interrogación.
1/48 Boeing F/A-18F Super Hornet
MM LS-013
72,50€As the latest F / A-18 variants, the F / A-18E / F aircraft have greatly improved electronic equipment and extended combat radius. To perform the missions like air superiority and ground attack and complex tasks including reconnaissance and electronic warfare, the F / A-18F’s rear cockpit weapon systems operator has new advanced cockpit displays and control system. The pilot and the weapon systems operator can perform air-to-air and air-to-ground tasks at the same time. Before the next-generation carrier-based fighters enter service, the F / A-18F will still be the main combat aircraft of the U.S. aircraft carrier battle group.
MENG releases this brand-new LS-013 Boeing F/A-18E Super Hornet model kit licensed by The Boeing Company. The finished model will be 377.9mm long and 273.4mm wide. This kit includes pre-cut stainless steel PE parts and pre-cut painting masks.
LS-013 Boeing F/A-18F Super Hornet
Scale: 1/48
Release in: July 2021
Flaps and slats can be installed in retracted or deployed positions.
Horizontal stabilizers and rudders are movable.
The two-seat variant’s cockpit and cockpit interior equipment are precisely replicated.
The specially designed pluggable main pylons allow the easy change of weapons; this kit includes AGM-65 air-to-ground missiles and GBU-16 laser-guided bombs.
Two U.S. Navy pilot figures featuring realistic gestures and finely replicated suit and equipment are included. Two flight helmet options are provided.
This kit includes optional exterior parts.
Como las últimas variantes del F / A-18, los aviones F / A-18E / F tienen equipos electrónicos muy mejorados y un radio de combate extendido. Para realizar misiones como superioridad aérea y ataque terrestre y tareas complejas que incluyen reconocimiento y guerra electrónica, el operador de sistemas de armas de la cabina trasera del F / A-18F tiene nuevas pantallas de cabina y un sistema de control avanzados. El piloto y el operador de sistemas de armas pueden realizar tareas aire-aire y aire-tierra al mismo tiempo. Antes de que los cazas basados en portaaviones de próxima generación entren en servicio, el F / A-18F seguirá siendo el principal avión de combate del grupo de batalla de portaaviones de EE. UU.
MENG lanza este nuevo kit modelo LS-013 Boeing F / A-18E Super Hornet con licencia de The Boeing Company. El modelo terminado tendrá 377,9 mm de largo y 273,4 mm de ancho. Este kit incluye piezas de PE de acero inoxidable precortadas y máscaras de pintura precortadas.
LS-013 Boeing F / A-18F Super Hornet
Escala: 1/48
Lanzamiento: julio de 2021
Las aletas y las lamas se pueden instalar en posiciones retraídas o desplegadas.
Los timones y estabilizadores horizontales son móviles.
La cabina del piloto y el equipamiento interior de la cabina de la variante de dos asientos se reproducen con precisión.
Los pilones principales enchufables especialmente diseñados permiten el cambio fácil de armas; este kit incluye misiles aire-tierra AGM-65 y bombas guiadas por láser GBU-16.
Se incluyen dos figuras de piloto de la Marina de los EE. UU. Con gestos realistas y un traje y equipo finamente replicados. Se proporcionan dos opciones de casco de vuelo.
Este kit incluye piezas exteriores opcionales.
RTD35665
17,99€WW II Series – 3D Resin Printed
High-detailed 3D Resin Printed Set
Serie WW II – Resina impresa en 3D
Conjunto impreso en resina 3D de alto nivel de detalle
MJEZ35019
16,95€SCALE : 1/35
3D PRINTED
EASY ASSEMBLING AND HIGH RESOLUTION.
ESCALA: 1/35
IMPRESO EN 3D
FÁCIL MONTAJE Y ALTA RESOLUCIÓN.
1/48 U.S. Laser-Guided Bombs & Anti-Radiation Missiles
MM SPS-072
14,50€As the U.S. military has taken the lead in completing the digitalization of armed forces, its air power, as a highly specialized force, has received a wide range of advanced airborne weapons for complex battlefield situations.
MENG will release the SPS-072 U.S. Laser-Guided Bombs & Anti-Radiation Missiles model kit which includes various airborne weapons used by the U.S. military. Now let’s take a look!
SPS-072 U.S. Laser-Guided Bombs & Anti-Radiation Missiles
Scale: 1/48
Release in: July 2021
This model kit includes four types of laser-guided bombs: GBU-10/GBU-12/GBU-16/GBU-24 (two of each), and three types of anti-radiation missiles: AGM-65/AGM-78/AGM-88 (two of each).
A medida que el ejército de los EE. UU. Ha tomado la iniciativa para completar la digitalización de las fuerzas armadas, su poder aéreo, como fuerza altamente especializada, ha recibido una amplia gama de armas aerotransportadas avanzadas para situaciones complejas en el campo de batalla.
MENG lanzará el kit modelo SPS-072 de bombas guiadas por láser y misiles antirradiación de EE. UU. Que incluye varias armas aerotransportadas utilizadas por el ejército de los EE. UU. ¡Ahora echemos un vistazo!
SPS-072 Bombas guiadas por láser y misiles antirradiación de EE. UU.
Escala: 1/48
Lanzamiento: julio de 2021
Este kit modelo incluye cuatro tipos de bombas guiadas por láser: GBU-10 / GBU-12 / GBU-16 / GBU-24 (dos de cada uno) y tres tipos de misiles antirradiación: AGM-65 / AGM-78 / AGM-88 (dos de cada uno).
ED82121
34,50€ProfiPACK edition kit of British WWII fighter aircraft Tempest Mk.V in 1/48 scale.
The kit offers the aircraft manufactured within Series 1.
plastic parts: Eduard
No. of decal options: 6
decals: Cartograf
PE parts: yes, pre-painted
painting mask: yes
resin parts: no
Kit de edición ProfiPACK del avión de combate británico de la Segunda Guerra Mundial Tempest Mk.V en escala 1/48.
El kit ofrece el avión fabricado dentro de la Serie 1.
piezas de plástico: Eduard
No de opciones de calcas: 6
calcas: Cartograf
Piezas de PE: sí, prepintadas
máscara de pintura: sí
piezas de resina: no
G4 with armament, WWII German Car 1/35
ICM 35530
33,95€The three-axle G4 passenger car was designed by Daimler-Benz in 1934 and was produced until 1939. This heavy six-seater off-road vehicle with an eight-cylinder engine with an output of 100 (later 110) hp was designed for high-ranking officials of the Third Reich, as well as for the army, where it was used as a staff car (under the designation Kfz.21). The G4 was produced as a four-door sedan with a folding roof. This car was too complex and expensive for mass production, so it was made in a relatively small quantity.
Some trucks were equipped with MG 34 machine guns. They served to transport high command staff of the Wehrmacht, as well as guards and escorts. Vehicles in this variant were called Partisanenwagen.
El automóvil de pasajeros G4 de tres ejes fue diseñado por Daimler-Benz en 1934 y se fabricó hasta 1939. Este pesado vehículo todoterreno de seis plazas con un motor de ocho cilindros con una potencia de 100 (luego 110) hp fue diseñado para altas -funcionarios de rango del Tercer Reich, así como para el ejército, donde se usó como automóvil del estado mayor (bajo la designación Kfz.21). El G4 se fabricó como un sedán de cuatro puertas con techo plegable. Este automóvil era demasiado complejo y costoso para la producción en masa, por lo que se fabricó en una cantidad relativamente pequeña.
Algunos camiones estaban equipados con ametralladoras MG 34. Sirvieron para transportar personal de alto mando de la Wehrmacht, así como guardias y escoltas. Los vehículos de esta variante se llamaron Partisanenwagen.
Escala
1:35
Periodo de tiempo
WW2
Tamaño del modelo (largo x alto)
158 x 54 mm
Tamaño de caja
295 x 225 x 40 mm
Numero de detalles
307 + 20
AH-1G Cobra (late production), US Attack Helicopter 1/32
ICM 32061
73,95€The AH-1G combat helicopter has conceived as a fire support helicopter. Due to its firepower, the term “aerial artillery” coined during the Vietnam War, was often applied to it. The main armament mounted on a turret in the nose part of the helicopter was a six-barreled Minigun 7.62 mm machine gun with a clip of 4,000 rounds and an M129 40 mm grenade launcher with 300 rounds of ammunition. Other types of weapons also were used.
In 1972, the Vietnamese began to use the Soviet “Strela” man-portable anti-aircraft system to attack low-flying targets. They were very successful against helicopters, including Cobras. Some helicopters were equipped with a device that diverted hot gases from the working engine upwards to protect them from the homing heads mounted on the Arrows. And as practice showed, this had the necessary effect. To capture helicopters modified in this way, the sensitivity of the Arrow’s homing head was insufficient.
During the war in Southeast Asia, the Cobras demonstrated excellent survivability and proved themselves to be a reliable and powerful ground support aircraft.
Scale
1:32
Time period
After 1950
Model size (length x width)
422 x 106 mm
Box size
410 x 260 x 100 mm
Number of details
241
El helicóptero de combate AH-1G se ha concebido como un helicóptero de apoyo contra incendios. Debido a su potencia de fuego, el término “artillería aérea”, acuñado durante la Guerra de Vietnam, se le aplicó a menudo. El armamento principal montado en una torreta en la parte delantera del helicóptero era una ametralladora Minigun de 7,62 mm de seis cañones con un cargador de 4.000 rondas y un lanzagranadas M129 de 40 mm con 300 rondas de munición. También se utilizaron otros tipos de armas.
En 1972, los vietnamitas comenzaron a utilizar el sistema antiaéreo portátil “Strela” soviético para atacar objetivos en vuelo bajo. Tuvieron mucho éxito contra helicópteros, incluidos Cobras. Algunos helicópteros estaban equipados con un dispositivo que desviaba los gases calientes del motor en funcionamiento hacia arriba para protegerlos de los cabezales de retorno montados en los Arrows. Y como demostró la práctica, esto tuvo el efecto necesario. Para capturar helicópteros modificados de esta manera, la sensibilidad de la cabeza de retorno del Arrow fue insuficiente.
Durante la guerra en el sudeste asiático, los Cobras demostraron una excelente capacidad de supervivencia y demostraron ser un avión de apoyo terrestre confiable y poderoso.
Escala
1:32
Periodo de tiempo
Después de 1950
Tamaño del modelo (largo x ancho)
422 x 106 mm
Tamaño de caja
410 x 260 x 100 mm
Numero de detalles
241
AFV AF35328
45,50€■ Centurion MK 5/1 glacis armour.
■ Front and rear mudguards.
■ Model A Ordnance QF 20-pounder.
■ Model B Ordnance QF 20-pounder.
■ One piece road wheels.
■ Searchlight.
■ Rearview mirror.
■ Decals for Centurion MK 5 and Centurion MK 5/1 in BOAR liveries.
■ Armadura glacis Centurion MK 5/1.
■ Guardabarros delantero y trasero.
■ Modelo A Artillería QF de 20 libras.
■ Artillería modelo B QF de 20 libras.
■ Ruedas de carretera de una pieza.
■ Reflector.
■ Espejo retrovisor.
■ Calcomanías para Centurion MK 5 y Centurion MK 5/1 en colores BOAR.
Cookie | Duration | Description |
---|---|---|
PHPSESSID | session | This cookie is native to PHP applications. The cookie is used to store and identify a users' unique session ID for the purpose of managing user session on the website. The cookie is a session cookies and is deleted when all the browser windows are closed. |
viewed_cookie_policy | 1 year | The cookie is set by the GDPR Cookie Consent plugin to store whether or not the user has consented to the use of cookies. It does not store any personal data. |
Cookie | Duration | Description |
---|---|---|
pelm_last_loaded_shop_type | 1 month | No description available. |
woocommerce_recently_viewed | session | Description unavailable. |
wp_woocommerce_session_9205d68996927145eedf8afcab99571e | 2 days | No description |
yith_wcwl_session_9205d68996927145eedf8afcab99571e | 1 month | No description |
Cookie | Duration | Description |
---|---|---|
_fbp | 3 months | This cookie is set by Facebook to display advertisements when either on Facebook or on a digital platform powered by Facebook advertising, after visiting the website. |
fr | 3 months | Facebook sets this cookie to show relevant advertisements to users by tracking user behaviour across the web, on sites that have Facebook pixel or Facebook social plugin. |
loc | 1 year 1 month | AddThis sets this geolocation cookie to help understand the location of users who share the information. |
VISITOR_INFO1_LIVE | 5 months 27 days | A cookie set by YouTube to measure bandwidth that determines whether the user gets the new or old player interface. |
YSC | session | YSC cookie is set by Youtube and is used to track the views of embedded videos on Youtube pages. |
yt-remote-connected-devices | never | YouTube sets this cookie to store the video preferences of the user using embedded YouTube video. |
yt-remote-device-id | never | YouTube sets this cookie to store the video preferences of the user using embedded YouTube video. |
yt.innertube::nextId | never | This cookie, set by YouTube, registers a unique ID to store data on what videos from YouTube the user has seen. |
yt.innertube::requests | never | This cookie, set by YouTube, registers a unique ID to store data on what videos from YouTube the user has seen. |
Cookie | Duration | Description |
---|---|---|
_ga | 2 years | The _ga cookie, installed by Google Analytics, calculates visitor, session and campaign data and also keeps track of site usage for the site's analytics report. The cookie stores information anonymously and assigns a randomly generated number to recognize unique visitors. |
_ga_BK3V7Y3VZB | 2 years | This cookie is installed by Google Analytics. |
_gat_gtag_UA_105576964_1 | 1 minute | Set by Google to distinguish users. |
_gid | 1 day | Installed by Google Analytics, _gid cookie stores information on how visitors use a website, while also creating an analytics report of the website's performance. Some of the data that are collected include the number of visitors, their source, and the pages they visit anonymously. |
at-rand | never | AddThis sets this cookie to track page visits, sources of traffic and share counts. |
CONSENT | 2 years | YouTube sets this cookie via embedded youtube-videos and registers anonymous statistical data. |
uvc | 1 year 1 month | Set by addthis.com to determine the usage of addthis.com service. |
Cookie | Duration | Description |
---|---|---|
pll_language | 1 year | The pll _language cookie is used by Polylang to remember the language selected by the user when returning to the website, and also to get the language information when not available in another way. |