| Weight | 0.1 kg |
|---|---|
| Dimensions | 20 × 15 × 10 cm |
AK Points
DRY SANDPAPER 800
Availability: In stock
2,25€
Description language || Idioma de la descripción:
ENGLISHHigh quality sandpaper with resistant minerals for dry hand sanding. Special for smoothing and performing combined polishing works different numbers from the thickest to the finest.
Paper is a flexible material with very good resistance.
We recommend starting with a thick grain (lower numbers) and ending with a fine grain (higher numbers) for a perfect sanding / polishing of your miniatures.
Lija de papel de alta calidad con minerales resistentes para el lijado a mano en seco. Especiales para alisar y para realizar trabajos de pulido combinando distintas numeraciones, desde la más gruesa hasta la más fina.
El papel es un material flexible con muy buena resistencia.
Recomendamos empezar por un grano grueso (números más bajos) y acabar por un grano más fino (números más altos) para un perfecto lijado/pulido de tus miniaturas.
Custom Tab Content here.
Tail sed sausage magna quis commodo swine. Aliquip strip steak esse ex in ham hock fugiat in. Labore velit pork belly eiusmod ut shank doner capicola consectetur landjaeger fugiat excepteur short loin. Pork belly laboris mollit in leberkas qui. Pariatur swine aliqua pork chop venison veniam. Venison sed cow short loin bresaola shoulder cupidatat capicola drumstick dolore magna shankle.
Tail sed sausage magna quis commodo swine. Aliquip strip steak esse ex in ham hock fugiat in. Labore velit pork belly eiusmod ut shank doner capicola consectetur landjaeger fugiat excepteur short loin. Pork belly laboris mollit in leberkas qui. Pariatur swine aliqua pork chop venison veniam. Venison sed cow short loin bresaola shoulder cupidatat capicola drumstick dolore magna shankle.
Related Products to DRY SANDPAPER 800
AK191
4,70€
ENGLISH
ESPAÑOL
A high quality satin varnish which can be applied with a brush or an airbrush to achieve a dead flat finish on any surface.
Acrylic Satin Varnish formulated for maximum airbrush performance. Water soluble, odorless, and non-toxic. Shake before each use. We recommend AK-712 Acrylic Thinner for thinning. Dries completely in 12 hours.
60 ml.
Barniz satinado de alta calidad que puede ser aplicado con pincel o con aerógrafo para lograr un acabado plano en cualquier superficie.
Barniz satinado acrílico formulado para el máximo rendimiento del aerógrafo. Soluble en agua, inodoro y no tóxico. Agitar antes de cada uso. Recomendamos AK-712 Acrylic Thinner para diluir. Se seca completamente en 12 horas.
60 ml.
P705
6,35€Very soft thinner special for modelism in washes, filters, effects…
AK612
2,50€A useful everlasting tool that no bench should be without; a six well aluminum pallet for any type of paint related product: enamels, acrylics, lacquers, alcohol, acetone or any other type of thinner. Its six wells and central surface allow us to make a variety of mixtures at the same time, making this the perfect tool for modelers; and because it is aluminum, it stands up to whatever paint product is used!
AK186
6,50€
ENGLISH
ESPAÑOL
Special Product.
The definitive liquid to strip the paint completely or selectively from models or figures without damaging the plastic, resin or white metal.
Producto Especial.
El líquido definitivo para quitar la pintura por completo o selectivamente de modelos o figuras sin dañar el plástico, la resina o el metal blanco.
AK192
4,70€
ENGLISH
ESPAÑOL
A high quality glossy varnish which can be applied with a brush or an airbrush to achieve a dead flat finish on any surface.
Acrylic Glossy Varnish formulated for maximum airbrush performance. Water soluble, odorless, and non-toxic. Shake before each use. We recommend AK-712 Acrylic Thinner for thinning. Dries completely in 12 hours.
60 ml.
Barniz brillante de alta calidad que puede ser aplicado con pincel o con aerógrafo para lograr un acabado plano en cualquier superficie.
Barniz brillante acrílico formulado para el máximo rendimiento del aerógrafo. Soluble en agua, inodoro y no tóxico. Agitar antes de cada uso. Recomendamos AK-712 Acrylic Thinner para diluir. Se seca completamente en 12 horas.
60 ml.
AK893
6,50€
ENGLISH
ESPAÑOL
Special Product.
High quality product developed to enhance, repair, and achieve extremely realistic transparent glass-like finishes on clear plastic parts. Simply dip and let dry for a few minutes. The bottle is thick to dip parts without problem. Clean excess around the edges to achieve a uniform layer. For best results, allow product to dry in a dust-free environment. This product, when applied to clear plastic, will result in a realistic glass-like appearance on parts like clear plastic cockpit canopies or other clear parts.
Producto Especial.
Producto de alta calidad desarrollado para mejorar, reparar y lograr acabados transparentes extremadamente realistas en forma de vidrio en piezas de plástico transparente. Simplemente sumerja y deje secar durante unos minutos. La botella es gruesa para sumergir las piezas sin problema. Limpie el exceso alrededor de los bordes para lograr una capa uniforme. Para mejores resultados, permita que el producto se seque en un ambiente libre de polvo. Este producto, cuando se aplica a plástico transparente, dará como resultado una apariencia realista de vidrio en partes como cubiertas de cabina de plástico transparente u otras partes transparentes.
AK617
4,95€A must have product for any modeler who wants to add volume to their mud and soil mixtures whether is for a diorama or to be splashed on to their vehicle. Mix the plaster in with any of our high quality Nature Effects line of different types of mud, earth, dust and soil. The combinations are endless. If your mixture is too thick you can dilute it with white spirit. If is too thin, add more plaster. Either paint your mixture on to your diorama or load a paint brush with your mixture and using your airbrush, blow short bursts of air at the brush to recreate splatters.
AK582
5,95€Liquid to adapt your decals to any surface. Wet the decal with the solution and a brush after place it. Leave for a few minutes, then with the help of the brush, adapt it to the surface to fully integrate it. With this product no decal will resist, no matter how complicated the surface be. And only with one product!
AK712
4,25€
ENGLISH
ESPAÑOL
Water based thinner especially designed for use with AK-Interactive acrylics. Our non-toxic, low odor thinner is also compatible for use with other brands.
Not just the typical alcohol and water based thinner, our specially formulated product is ideal for creating the perfect paint consistency for brush and airbrush. Non-toxic and odorless.
ESPAÑOL
AK118
5,90€Adhesive to fix down all kinds of earth, gravel, small stones, sand, etc to your bases. This special adhesive, with an alcohol base, is much more effective than the traditional white glue. The white glue tends to leave a plastic finish over the surface giving an unreal aspect and also tends not to expand well through the material. But this new adhesive expands rapidly and is adsorbed by the stones and sand saving a lot of time when fixing down rubble for example. This product is easily cleaned using alcohol, can be applied using an airbrush or paint brush and the drying process can be accelerated with a hairdryer or any other type of heat source. Although it’s matt when it dries, on smooth surfaces it can leave a light satin mark, however, this can be removed with a matt varnish.
Original product of AK-interactive, don’t choose copies.
AK158
15,95€System of adhesive masks and a photoetched part to easily, and accurately, reproduce the German Ambush camouflage pattern that was very common towards the end of the War. This camouflage is made up of various sized discs that form the perfect camouflage system for central European forests. Until now, perfecting this camouflage pattern has challenged even the most seasoned of modelers; thankfully, this system has made it easy for the most novice of modelers to do in just minutes. Included are various adhesive masks, which, when used correctly will allow produce beautiful results on many vehicles. For those difficult to reach areas a small photoetched mask is included. A complete set of color instructions are included.
AK737
4,90€Liquid to slow down the drying times for any acrylic paint. To use simply add a few drops to your airbrush and will prevent fast drying at the tip of the airbrush especially in high temperature conditions.
Also can be used to apply with brush to get glazing effects, or just delay dry in a controled way. Non-toxic and odorless.
AK191
4,70€
ENGLISH
ESPAÑOL
A high quality satin varnish which can be applied with a brush or an airbrush to achieve a dead flat finish on any surface.
Acrylic Satin Varnish formulated for maximum airbrush performance. Water soluble, odorless, and non-toxic. Shake before each use. We recommend AK-712 Acrylic Thinner for thinning. Dries completely in 12 hours.
60 ml.
Barniz satinado de alta calidad que puede ser aplicado con pincel o con aerógrafo para lograr un acabado plano en cualquier superficie.
Barniz satinado acrílico formulado para el máximo rendimiento del aerógrafo. Soluble en agua, inodoro y no tóxico. Agitar antes de cada uso. Recomendamos AK-712 Acrylic Thinner para diluir. Se seca completamente en 12 horas.
60 ml.
P705
6,35€Very soft thinner special for modelism in washes, filters, effects…
AK612
2,50€A useful everlasting tool that no bench should be without; a six well aluminum pallet for any type of paint related product: enamels, acrylics, lacquers, alcohol, acetone or any other type of thinner. Its six wells and central surface allow us to make a variety of mixtures at the same time, making this the perfect tool for modelers; and because it is aluminum, it stands up to whatever paint product is used!
AK186
6,50€
ENGLISH
ESPAÑOL
Special Product.
The definitive liquid to strip the paint completely or selectively from models or figures without damaging the plastic, resin or white metal.
Producto Especial.
El líquido definitivo para quitar la pintura por completo o selectivamente de modelos o figuras sin dañar el plástico, la resina o el metal blanco.
AK192
4,70€
ENGLISH
ESPAÑOL
A high quality glossy varnish which can be applied with a brush or an airbrush to achieve a dead flat finish on any surface.
Acrylic Glossy Varnish formulated for maximum airbrush performance. Water soluble, odorless, and non-toxic. Shake before each use. We recommend AK-712 Acrylic Thinner for thinning. Dries completely in 12 hours.
60 ml.
Barniz brillante de alta calidad que puede ser aplicado con pincel o con aerógrafo para lograr un acabado plano en cualquier superficie.
Barniz brillante acrílico formulado para el máximo rendimiento del aerógrafo. Soluble en agua, inodoro y no tóxico. Agitar antes de cada uso. Recomendamos AK-712 Acrylic Thinner para diluir. Se seca completamente en 12 horas.
60 ml.
AK893
6,50€
ENGLISH
ESPAÑOL
Special Product.
High quality product developed to enhance, repair, and achieve extremely realistic transparent glass-like finishes on clear plastic parts. Simply dip and let dry for a few minutes. The bottle is thick to dip parts without problem. Clean excess around the edges to achieve a uniform layer. For best results, allow product to dry in a dust-free environment. This product, when applied to clear plastic, will result in a realistic glass-like appearance on parts like clear plastic cockpit canopies or other clear parts.
Producto Especial.
Producto de alta calidad desarrollado para mejorar, reparar y lograr acabados transparentes extremadamente realistas en forma de vidrio en piezas de plástico transparente. Simplemente sumerja y deje secar durante unos minutos. La botella es gruesa para sumergir las piezas sin problema. Limpie el exceso alrededor de los bordes para lograr una capa uniforme. Para mejores resultados, permita que el producto se seque en un ambiente libre de polvo. Este producto, cuando se aplica a plástico transparente, dará como resultado una apariencia realista de vidrio en partes como cubiertas de cabina de plástico transparente u otras partes transparentes.
AK617
4,95€A must have product for any modeler who wants to add volume to their mud and soil mixtures whether is for a diorama or to be splashed on to their vehicle. Mix the plaster in with any of our high quality Nature Effects line of different types of mud, earth, dust and soil. The combinations are endless. If your mixture is too thick you can dilute it with white spirit. If is too thin, add more plaster. Either paint your mixture on to your diorama or load a paint brush with your mixture and using your airbrush, blow short bursts of air at the brush to recreate splatters.
AK582
5,95€Liquid to adapt your decals to any surface. Wet the decal with the solution and a brush after place it. Leave for a few minutes, then with the help of the brush, adapt it to the surface to fully integrate it. With this product no decal will resist, no matter how complicated the surface be. And only with one product!
AK712
4,25€
ENGLISH
ESPAÑOL
Water based thinner especially designed for use with AK-Interactive acrylics. Our non-toxic, low odor thinner is also compatible for use with other brands.
Not just the typical alcohol and water based thinner, our specially formulated product is ideal for creating the perfect paint consistency for brush and airbrush. Non-toxic and odorless.
ESPAÑOL
AK118
5,90€Adhesive to fix down all kinds of earth, gravel, small stones, sand, etc to your bases. This special adhesive, with an alcohol base, is much more effective than the traditional white glue. The white glue tends to leave a plastic finish over the surface giving an unreal aspect and also tends not to expand well through the material. But this new adhesive expands rapidly and is adsorbed by the stones and sand saving a lot of time when fixing down rubble for example. This product is easily cleaned using alcohol, can be applied using an airbrush or paint brush and the drying process can be accelerated with a hairdryer or any other type of heat source. Although it’s matt when it dries, on smooth surfaces it can leave a light satin mark, however, this can be removed with a matt varnish.
Original product of AK-interactive, don’t choose copies.
AK158
15,95€System of adhesive masks and a photoetched part to easily, and accurately, reproduce the German Ambush camouflage pattern that was very common towards the end of the War. This camouflage is made up of various sized discs that form the perfect camouflage system for central European forests. Until now, perfecting this camouflage pattern has challenged even the most seasoned of modelers; thankfully, this system has made it easy for the most novice of modelers to do in just minutes. Included are various adhesive masks, which, when used correctly will allow produce beautiful results on many vehicles. For those difficult to reach areas a small photoetched mask is included. A complete set of color instructions are included.
AK737
4,90€Liquid to slow down the drying times for any acrylic paint. To use simply add a few drops to your airbrush and will prevent fast drying at the tip of the airbrush especially in high temperature conditions.
Also can be used to apply with brush to get glazing effects, or just delay dry in a controled way. Non-toxic and odorless.