Now available as SOFT LEAD & HARD LEAD.

Special non grease graphite pencil for simulating the polished metal on the worn edges of models.

• Check the main differences clicking here

*This leads are made with a wax like composition that may break but it can be perfectly used (they are delicate).

Now available as SOFT LEAD & HARD LEAD.

Special grease chalky white lead paint pencil to simulate the markings made with the real chalk used in the factories for the identification of the different parts of the manufactured vehicle

• Check the main differences clicking here

*This leads are made with a wax like composition that may break but it can be perfectly used (they are delicate).

• Graphite detailing pencil (SOFT | HARD)
• White chalk lead (SOFT | HARD)
• Sepia lead (SOFT | HARD)
• Chipping lead (SOFT | HARD)

• Check the main differences clicking here

*These leads are made with a wax like composition that may break but it can be perfectly used (they are delicate).

The best special pack for navy model lovers where you’ll find the best detailed photographs and a lot of step by step guide to paint, streaking and weathering your navy model. With this pack you will not need anymore!

*Available English & Spanish language.

It contains:

• U.S. Navy aircraft carrier U.S.S Lexington
• Modelling Full ahead special 1
• Wash for grey decks
• Streaking grime for light grey ships
• Salt streaks for ships
• Odorless thinner 

Enamel type streaking for modelling.
Create realistic dirt streaks and grime effects easily with this dirty color.
This enamel product creates realistic streaking grime effects on your models. Easy to apply. Very realistic coloristic color.
Shake well before use. Apply your streak with a fine pointed brush in irregular vertical lines from upper parts on sides and let the paint dry for about 10 minutes. Next take a flat brush moisted in White Spirit and swipe with little pressure over the earlier applied streak to soften the effect and create a natural look.

Enamel type streaking for modelling.
Rust and corrosion streaks and stains are easily produced using this reddish-brown color.
Shake well before use. Apply your streak with a fine pointed brush in irregular vertical lines from upper parts on sides and let the paint dry for about 10 minutes. Next take a flat brush moisted in White Spirit and swipe with little pressure over the earlier applied streak to soften the effect and create a natural look.

Enamel type streaking for modelling.
Light grey color ideal for creating dirt streaks on light or white colored surfaces. Also suitable for other effects such as add chromatic richness to any piece or surface. Shake well before use. Apply your streak with a fine pointed brush in irregular vertical lines from upper parts on sides and let the paint dry for about 10 minutes. Next take a flat brush moisted in White Spirit and swipe with little pressure over the earlier applied streak to soften the effect and create a natural look.

Enamel type product for modelling.
This is an enamel product to recreate natural dust effects. Simply apply it to your vehicle wheels, tracks and hull to achieve the most realistic effect possible. You can also mix this product with plaster if you want to give your dust volume.
Shake well before use and use in parts desired of your model. Afterwards, blend using a wide flat brush dampened with AK Interactive White Spirit.

Enamel type product for modelling.
A product to replicate natural fresh mud. This Dark brown enamel effect is ideally suited for creating muddy surfaces. It can be also mix with plaster to create volume. Apply with a brush or airbrush and then fade with a clean brush moist with Enamel Thinner. Just apply to your vehicle wheels, tracks and hull to achieve the most realistic effect.

Enamel type product for modelling.
An enamel product to make natural earth and mud type effects. Just apply to your vehicle wheels, tracks and hull to achieve ultra realistic earth effects. You can also mix this product with plaster to make mud with volume. This product can be mixed with our other earth colors leading to unlimited possibilities of nature effects. AFRICA DUST EFFECTS 35ml.
Enamel type product for modelling.
Realist color to make dust effects in vehicles of the Africa Korps, British or even modern. Light tan color is suited to creating dusty accumulations on surfaces. Apply with a brush or airbrush and then fade with a clean brush moist with Enamel Thinner.

Enamel type product for modelling.
Realist color to make dust effects in vehicles of the Africa Korps, British or even modern. Light tan color is suited to creating dusty accumulations on surfaces. Apply with a brush or airbrush and then fade with a clean brush moist with Enamel Thinner.

Enamel type product for modelling.
This dark earth colored effect can be used alone or mixed with other earth tones. Apply and fade with a clean brush moist with Enamel Thinner. Make your own dark mud and earth accumulations mixing this color with plaster. The result is ultra-realist and is easy to get all kinds of effects. Also it can be applied directly on tracks, wheels or vehicle hulls. This product is enamel and it can be blended with the rest of our colors and it is diluted with our White Spirit.

Enamel type streaking for modelling.

Darkest color in our range specifically suited for streaking effects over dark colored vehicles and surfaces. Also suitable for other effects such as add chromatic richness to any piece or surface.
Shake well before use. Apply your streak with a fine pointed brush in irregular vertical lines from upper parts on sides and let the paint dry for about 10 minutes. Next take a flat brush moisted in White Spirit and swipe with little pressure over the earlier applied streak to soften the effect and create a natural look.

Enamel type effect for modelling
The definitive mixture to make fuel spilled effects in any type of modern or classic vehicle. This is not product to make oil and grease effects. This product is good mainly to make fuel spilled effects only with a great realism. This product is enamel and it can be blended with the rest of our colors and it is diluted with our White Spirit.

Enamel type effect for modelling.
This dark green colored effect is perfect for creating fresh moss and slimy surfaces caused by dampness. Apply and fade with a clean brush moist with Enamel Thinner. Ships, boats, ports, wooden doors and many amphibious vehicles show this effect very particular due to the water and the humidity. Observe real pictures to use them like reference in your models.
You can combined with Slimy grime Light.

Enamel type effect for modelling.
This light green colored effect is perfect for creating moss and slimy surfaces caused by dampness. Apply and fade with a clean brush moist with Enamel Thinner. Ships, boats, ports, wooden doors and many amphibious vehicles show this effect very particular due to the water and the humidity. Observe real pictures to use them like reference in your models.
You can combined with Slimy grimeDark.

This DVD narrates all the secrets and techniques to paint winter vehicles. Detailed explanations for all processes like the base color, fading, mud, dust, chipping and more. Many new techniques explained like the famous “hairspray” technique, streaking effects and mud. This DVD covers three different camo schemes: very faded winter camo over green, new winter camo over dark yellow and white snakes over dark yellow. Narrated in English with Spanish subtitles.