Weight | 0.05 kg |
---|---|
Dimensions | 10 × 10 × 10 cm |
Product | |
Pack | Single |
Volumen | 20ml |
Theme | Sci-fi |
AK Points
Availability: In stock
3,90€
Special tone to make effects over Sci-fi subjects to make deep and contrast in grey surfaces. Indicated also for mix on any blue or grey colors for chromatic variation.
Weight | 0.05 kg |
---|---|
Dimensions | 10 × 10 × 10 cm |
Product | |
Pack | Single |
Volumen | 20ml |
Theme | Sci-fi |
AK183
5,25€A high quality ultra matte varnish which can be applied with a brush or an airbrush to achieve a dead flat finish on any surface.
Acrylic Ultra Matte Varnish formulated for maximum airbrush performance. Water soluble, odorless, and non-toxic. Shake before each use. We recommend AK-712 Acrylic Thinner for thinning. Dries completely in 12 hours.
60 ml.
Barniz ultra mate de alta calidad que puede ser aplicado con pincel o con aerógrafo para lograr un acabado plano en cualquier superficie.
Barniz ultra mate acrílico formulado para el máximo rendimiento del aerógrafo. Soluble en agua, inodoro y no tóxico. Agitar antes de cada uso. Recomendamos AK-712 Acrylic Thinner para diluir. Se seca completamente en 12 horas.
60 ml.
TOP LINE DELUXE Marta Kolinsky KIT
ABT850
71,95€MAGNET ULTRA RESISTANT CYANOCRYLATE GLUE
AK12015
7,60€20g.
General-purpose cyanoacrylate 401. Fast drying, extra strong, low viscosity, specially formulated for adhesion between materials that can even have an acidic surface. Can be used with rubber, leather, wood, metal, resin and plastic. The surfaces to be joined must be free of dirt, dust and grease. A small amount of adhesive should be applied; more cyanoacrylate does not guarantee a better bond and makes more difficult the drying of the adhesive that is effective for bonding.
– 99% Cyano.
– Ethyl cyanoacrylate
– Use temperature: -55º to 120º
– Set time: between 3 and 10 seconds. The gaps and uneven surfaces can increase this setting time. It is not necessary to use clamps. Holding the pieces firmly for 10-30 seconds will ensure better adhesion.
– Definitive cure time: 24 h
– Viscosity: 110 mPa.S
– Shear strength: 21.0 MPa
* Bottles are not filled at a 100% to leave some air and make it work properly.
20g.
Cianoacrilato de uso general 401, secado rápido, extra fuerte, baja viscosidad especialmente formulado para la adhesión entre materiales que incluso pueden tener una superficie ácida. Se puede usar con caucho, cuero, madera, metal, resina y plástico. Las superficies a unir deben estar libres de suciedad, polvo y grasa. Se debe aplicar una pequeña cantidad de adhesivo; más cianoacrilato no garantiza una mejor unión y hace más difícil el secado del adhesivo que es efectivo para la unión.
– 99% Cyano
– Cianoacrilato de etilo
– Temperatura de uso: -55º a 120º
– Tiempo de fraguado: entre 3 y 10 segundos. Los huecos y las superficies irregulares pueden aumentar este tiempo de fraguado. No es necesario usar abrazaderas. Sostener las piezas firmemente durante 10-30 segundos asegurará una mejor adhesión.
– Tiempo de curado definitivo: 24 h.
– Viscosidad: 110 mPa.S
– Resistencia al corte: 21.0 MPa
*Las botellas no se llenan al 100% para dejar algo de aire y que funcione correctamente.
AK050
5,90€Our odorless turpentine is very different from our white spirit. Besides being odorless, this product is softer and less aggressive than our White Spirit. This property of the odorless thinner (Turpentine) makes it great for delicate, soft and subtle blending. This thinner is exclusive to enamel and oil paint. This larger bottle gives you more thinner and costs less when compared to buying three 35ml bottles.
AK9009
9,90€Description language || Idioma de la descripción:
ENGLISH
Precision cutting pliers with an ergonomic handle covered with an orange non-slip vinyl foam, with a spring return.
They make a clean and precise cut. No need to touch up.
Suitable for parts or rods of plastic, PVC, resin or ABS less than 4mm.
Do not use to cut metal parts.
Alicates de corte de precisión con mango ergonómico cubierto con espuma de vinilo naranja, antideslizante y con muelle de retorno.
Realizan un corte limpio y preciso sin que sea necesario retocar.
Adecuado para piezas o varillas de plástico, PVC, resina o ABS menores de 4mm.
No utilizar para cortar piezas de metal.
FA 614
18,95€A set designed for thorough cleaning of any airbrush.
A glass jar with a plastic screw cap is used to purge the airbrush with the cleaner after each use. Thanks to a special filter in the upper part, all impurities and liquid remain in the container. Additionally, the lid is equipped with an airbrush stand.
Cleaners and rods are used to thoroughly clean various elements of airbrushes: tips, nozzles, bodies and other elements. The needle, on the other hand, cleans the inside of the airbrush nozzle or other internal parts of the airbrush, such as the needle guide channel.
Container Height: 85mm, diameter: 100mm.
Un conjunto diseñado para la limpieza a fondo de cualquier aerógrafo.
Se usa un frasco de vidrio con un tapón de rosca de plástico para purgar el aerógrafo con el limpiador después de cada uso. Gracias a un filtro especial en la parte superior, todas las impurezas y líquidos permanecen en el recipiente. Además, la tapa está equipada con un soporte para aerógrafo.
Los limpiadores y las varillas se utilizan para limpiar a fondo varios elementos de los aerógrafos: puntas, boquillas, cuerpos y otros elementos. La aguja, por otro lado, limpia el interior de la boquilla del aerógrafo u otras partes internas del aerógrafo, como el canal de guía de la aguja.
Altura del contenedor: 85 mm, diámetro: 100 mm.
SURVIVAL WEATHERING BRUSHES SET
AK663
12,20€An arsenal of brushes designed by the weathering experts here at AK. Top quality weathering products require the right tools to be applied; our Survival Weathering Brush set is the right set of tools you need. Contained in this set are the brushes needed to streak, chip, wash, and apply pigments plus much more.
Includes:
Un arsenal de pinceles diseñados por los expertos en weathering de AK. Los productos de weathering de alta calidad requieren la aplicación de las mismas con las herramientas adecuadas; nuestro juego de pinceles de supervivencia es el conjunto de herramientas adecuado que necesitas. En este juego se encuentran los pinceles necesarios para rayar, astillar, lavar y aplicar pigmentos y mucho más.
Incluye:
ABT114
6,50€For precision works is necessary to keep the tip of your brushes in a perfect state. This gel is indicated to keep the tip sharp and in perfect use condition with all brushes fibers compacted and never open or deformed. With this gel you will keep your brushes always like new ones after using and cleaning them (it can be used after the application of our ABT117 Magic Potion for Brushes or any other chemical or natural cleaner).
AK12004
4,95€40 ml.
Special square anti rolling base.
Ultra-thin precision maxoma fiber brush.
1. Special density.
2. Glue by capillary action, quick drying.
The Extra Thin Citrus Cement glues by capillary action with a medium / fast drying time, and has a mild citrus aroma. It is undoubtedly the best option for general assembly work. Great performance with the perfect viscosity for plastic modeling.
*Same characteristics as our AK12002 Extra Thin Cement but with an aromatic touch.
40 ml.
Base especial antivuelco cuadrada.
Pincel de fibra maxoma de precisión ultrafina.
1. Densidad especial.
2. Pegamento por capilaridad, uniones muy rápidas.
El Extra Fino Cítrico tiene las características del pegamento extra fino pero con un aroma cítrico suave. Para pegar por capilaridad con un tiempo de secado medio / rápido, es sin duda la mejor opción para el trabajo de montaje general. Gran rendimiento con la viscosidad perfecta para modelar plástico.
*Las mismas características que nuestro AK12002 Extra Thin Cement pero con un toque aromático.
AK9204
6,50€ENGLISH Merchandising product.
Sport bottle.
Cruiser Aluminum Bottle 400ml – Black with White logo.
Aluminum. With carabiner. Capacity: 400 ml.
ESPAÑOL Producto de Merchandising.
Botella de deporte.
Botella Aluminio Cruiser 400ml – Negro con logo Blanco.
Aluminio. Con mosquetón. Capacidad: 400 ml.
AK183
5,25€A high quality ultra matte varnish which can be applied with a brush or an airbrush to achieve a dead flat finish on any surface.
Acrylic Ultra Matte Varnish formulated for maximum airbrush performance. Water soluble, odorless, and non-toxic. Shake before each use. We recommend AK-712 Acrylic Thinner for thinning. Dries completely in 12 hours.
60 ml.
Barniz ultra mate de alta calidad que puede ser aplicado con pincel o con aerógrafo para lograr un acabado plano en cualquier superficie.
Barniz ultra mate acrílico formulado para el máximo rendimiento del aerógrafo. Soluble en agua, inodoro y no tóxico. Agitar antes de cada uso. Recomendamos AK-712 Acrylic Thinner para diluir. Se seca completamente en 12 horas.
60 ml.
TOP LINE DELUXE Marta Kolinsky KIT
ABT850
71,95€MAGNET ULTRA RESISTANT CYANOCRYLATE GLUE
AK12015
7,60€20g.
General-purpose cyanoacrylate 401. Fast drying, extra strong, low viscosity, specially formulated for adhesion between materials that can even have an acidic surface. Can be used with rubber, leather, wood, metal, resin and plastic. The surfaces to be joined must be free of dirt, dust and grease. A small amount of adhesive should be applied; more cyanoacrylate does not guarantee a better bond and makes more difficult the drying of the adhesive that is effective for bonding.
– 99% Cyano.
– Ethyl cyanoacrylate
– Use temperature: -55º to 120º
– Set time: between 3 and 10 seconds. The gaps and uneven surfaces can increase this setting time. It is not necessary to use clamps. Holding the pieces firmly for 10-30 seconds will ensure better adhesion.
– Definitive cure time: 24 h
– Viscosity: 110 mPa.S
– Shear strength: 21.0 MPa
* Bottles are not filled at a 100% to leave some air and make it work properly.
20g.
Cianoacrilato de uso general 401, secado rápido, extra fuerte, baja viscosidad especialmente formulado para la adhesión entre materiales que incluso pueden tener una superficie ácida. Se puede usar con caucho, cuero, madera, metal, resina y plástico. Las superficies a unir deben estar libres de suciedad, polvo y grasa. Se debe aplicar una pequeña cantidad de adhesivo; más cianoacrilato no garantiza una mejor unión y hace más difícil el secado del adhesivo que es efectivo para la unión.
– 99% Cyano
– Cianoacrilato de etilo
– Temperatura de uso: -55º a 120º
– Tiempo de fraguado: entre 3 y 10 segundos. Los huecos y las superficies irregulares pueden aumentar este tiempo de fraguado. No es necesario usar abrazaderas. Sostener las piezas firmemente durante 10-30 segundos asegurará una mejor adhesión.
– Tiempo de curado definitivo: 24 h.
– Viscosidad: 110 mPa.S
– Resistencia al corte: 21.0 MPa
*Las botellas no se llenan al 100% para dejar algo de aire y que funcione correctamente.
AK050
5,90€Our odorless turpentine is very different from our white spirit. Besides being odorless, this product is softer and less aggressive than our White Spirit. This property of the odorless thinner (Turpentine) makes it great for delicate, soft and subtle blending. This thinner is exclusive to enamel and oil paint. This larger bottle gives you more thinner and costs less when compared to buying three 35ml bottles.
AK9009
9,90€Description language || Idioma de la descripción:
ENGLISH
Precision cutting pliers with an ergonomic handle covered with an orange non-slip vinyl foam, with a spring return.
They make a clean and precise cut. No need to touch up.
Suitable for parts or rods of plastic, PVC, resin or ABS less than 4mm.
Do not use to cut metal parts.
Alicates de corte de precisión con mango ergonómico cubierto con espuma de vinilo naranja, antideslizante y con muelle de retorno.
Realizan un corte limpio y preciso sin que sea necesario retocar.
Adecuado para piezas o varillas de plástico, PVC, resina o ABS menores de 4mm.
No utilizar para cortar piezas de metal.
FA 614
18,95€A set designed for thorough cleaning of any airbrush.
A glass jar with a plastic screw cap is used to purge the airbrush with the cleaner after each use. Thanks to a special filter in the upper part, all impurities and liquid remain in the container. Additionally, the lid is equipped with an airbrush stand.
Cleaners and rods are used to thoroughly clean various elements of airbrushes: tips, nozzles, bodies and other elements. The needle, on the other hand, cleans the inside of the airbrush nozzle or other internal parts of the airbrush, such as the needle guide channel.
Container Height: 85mm, diameter: 100mm.
Un conjunto diseñado para la limpieza a fondo de cualquier aerógrafo.
Se usa un frasco de vidrio con un tapón de rosca de plástico para purgar el aerógrafo con el limpiador después de cada uso. Gracias a un filtro especial en la parte superior, todas las impurezas y líquidos permanecen en el recipiente. Además, la tapa está equipada con un soporte para aerógrafo.
Los limpiadores y las varillas se utilizan para limpiar a fondo varios elementos de los aerógrafos: puntas, boquillas, cuerpos y otros elementos. La aguja, por otro lado, limpia el interior de la boquilla del aerógrafo u otras partes internas del aerógrafo, como el canal de guía de la aguja.
Altura del contenedor: 85 mm, diámetro: 100 mm.
AK093
3,60€Enamel Product.
This product allow us bring life to the details of the interior of our tanks. This wash is specially designed to be applied over the light colors of the interiors, such as RAL 9001 Cremeweiss or white. For this reason we can also use it on winter camouflaged vehicles. Ideal wash for creating the accumulation of dirt and grime on details on light colors.
The basic technique used to weather any type of model is the wash, a classic technique that is still one of the most used techniques in modelling today. Apply the washes after shaking the bottle with a large brush to pick out details and creating shadows.
The excess of the wash can be easily removed with a clean brush and White Spirit.
Producto Esmalte.
Este producto nos permite dar vida a los detalles del interior de nuestros tanques. Este lavado está especialmente diseñado para aplicarse sobre los colores claros de los interiores, como RAL 9001 Cremeweiss o blanco. Por esta razón, también podemos usarlo en vehículos camuflados en invierno. Lavado ideal para crear la acumulación de suciedad y mugre en los detalles de colores claros.
La técnica básica utilizada para envejecer cualquier tipo de modelo es el lavado, una técnica clásica que todavía es una de las técnicas más utilizadas en el modelado en la actualidad. Aplique los lavados después de agitar la botella con un pincel grande para seleccionar los detalles y crear sombras.
El exceso de lavado se puede eliminar fácilmente con un pincel limpio y White Spirit.
AK301
3,60€Enamel Product.
This enamel wash is specially designed to bring out the detail of the wooden covers typical of many warships. It can also be easily used for any other wooden subject.
Just shake well before use and you can apply it directly to your model to create contrast and depth in the details. Remove excess with a clean brush moist in Enamel Thinner. This is an enamel product and can by dissolved using our White Spirit or Odourless Turpentine.
The basic technique used to weather any type of model is the wash, a classic technique that is still one of the most used techniques in modelling today.
Producto Esmalte.
Este lavado de esmalte está especialmente diseñado para resaltar el detalle de las cubiertas de madera típicas de muchos buques de guerra. También se puede usar fácilmente para cualquier otra temática en madera.
Simplemente agítelo bien antes de usarlo y aplíquelo directamente a su modelo para crear contraste y profundidad en los detalles. Elimine el exceso con un pincel limpio húmedo en Enamel Thinner. Este es un producto en base de esmalte y se puede disolver usando nuestro White Spirit o Aguarrás inodoro.
La técnica básica utilizada para resistir cualquier tipo de modelo es el lavado, una técnica clásica que todavía es una de las técnicas más utilizadas en el modelado en la actualidad.
Streaking Grime for Light Grey Ships
AK305
3,60€Enamel Product.
With this enamel product the modeler may easily represent streaking dirt effects on ships painted in light grey. It can also be used on other issues of similar color such as aircraft or AFVs. Shake well before use. Apply your streak with a fine pointed brush in irregular vertical lines from upper parts on sides and let the paint dry for about 10 minutes. Next take a flat brush moistened in White Spirit and swipe with little pressure over the earlier applied streak to soften the effect and create a natural look.
Producto Esmalte.
Con este producto de esmalte, el modelista puede representar fácilmente efectos de suciedad en barcos pintados en gris claro. También se puede usar en otras cuestiones de color similar, como aviones o AFV. Agitar bien antes de usar. Aplique su chorretón con un pincel fino y puntiagudo en líneas verticales irregulares desde las partes superiores a los lados y deje que la pintura se seque durante unos 10 minutos. A continuación, tome un pincel plano humedecido en White Spirit y deslice con poca presión sobre la raya aplicada anteriormente para suavizar el efecto y crear un aspecto natural.
AK070
3,60€Enamel Product.
The perfect color to give contrast to details and panels on tanks painted with Panzer Grey or any grey tone. Just mix well and use a brush to apply to details, rivets, hatches, etc. and remove excess with a clean brush moist in Enamel Thinner.
The basic technique used to weather any type of model is the wash, a classic technique that is still one of the most used techniques in modelling today.
Producto Esmalte.
El color perfecto para dar contraste a los detalles y paneles en tanques pintados con Gris Panzer o cualquier tono gris. Simplemente mezcle bien y use un pincel para aplicar a los detalles, remaches, escotillas, etc. y elimine el exceso con un pincel limpio húmedo en Enamel Thinner.
La técnica básica utilizada para envejecer cualquier tipo de modelo es el lavado, una técnica clásica que todavía es una de las técnicas más utilizadas en el modelismo en la actualidad.
AK066
3,60€Enamel Product.
D.A.K. wash for Africa Corps vehicles, also other light colored desert vehicles. Apply on details and remove excess with a clean brush moist with Enamel Thinner. A very appropriate color for desert vehicles painted with a light sand color, especially German tanks from DAK. The basic technique used to weather any type of model is the wash, a classic technique that is still one of the most used techniques in modelling today. Apply the washes after shaking the bottle with a large brush to pick out details and creating shadows.
The excess of the wash can be easily removed with a clean brush and White Spirit.
Producto Esmalte.
D.A.K. para hacer lavados en vehículos del Afrika Korps, también otros vehículos del desierto de colores claros. Aplicar sobre los detalles y eliminar el exceso con un pincel limpio húmedo con Enamel Thinner. Un color muy apropiado para vehículos del desierto pintados con un color arena claro, especialmente los tanques alemanes de DAK. La técnica básica utilizada para resistir cualquier tipo de modelo es el lavado, una técnica clásica que todavía es una de las técnicas más utilizadas en el modelado en la actualidad. Aplique los lavados después de agitar la botella con un pincel grande para seleccionar los detalles y crear sombras.
El exceso de lavado se puede eliminar fácilmente con un pincel limpio y White Spirit.
AK071
3,60€Enamel Product.
Filters are designed to achieve a subtle tonal variation for especially vehicles in monotone camouflage colors. Shake and apply directly from the bottle with a moist flat brush. This filter allows us to change subtly the base tone of our vehicles in grey or panzer grey making it more accurate and authentic color. At the same time, the filter adds depth and richness to our vehicle, preparing it for the next paint steps.
Use the filters by moistening a brush and applying it without flooding the surface, to enrich hues in your models, unify camouflage, or highlight areas with a different tone. With these products we will avoid mixing paints, looking for the correct dilution, or searching for the correct colors for our vehicle.
These filters are enamel based and can be cleaned or diluted with Odorless Enamel Thinner.
Producto Esmalte.
Los filtros están diseñados para lograr una variación tonal sutil para vehículos especialmente en colores de camuflaje monótonos. Agite y aplique directamente de la botella con un pincel plano húmedo. Este filtro nos permite cambiar sutilmente el tono base de nuestros vehículos en gris o gris panzer, lo que lo convierte en un color más preciso y auténtico. Al mismo tiempo, el filtro agrega profundidad y riqueza a nuestro vehículo, preparándolo para los próximos pasos de pintura.
Use los filtros humedeciendo un pincel y aplicándolo sin inundar la superficie, para enriquecer los tonos en sus modelos, unificar el camuflaje o resaltar áreas con un tono diferente. Con estos productos evitaremos mezclar pinturas, buscar la dilución correcta o buscar los colores correctos para nuestro vehículo.
Estos filtros son a base de esmalte y se pueden limpiar o diluir con un diluyente de esmalte inodoro.
AK075
3,60€Enamel Product.
The perfect dark wash for modern vehicles painted with a dark tri-color camoflage, especially NATO vehicles or dark camos.
The basic technique used to weather any type of model is the wash, a classic technique that is still one of the most used techniques in modelling today. Apply the washes after shaking the bottle with a large brush to pick out details and creating shadows.
The excess of the wash can be easily removed with a clean brush and White Spirit.
Producto Esmalte.
El lavado oscuro perfecto para vehículos modernos pintados con un camuflaje tricolor oscuro, especialmente vehículos de la OTAN o camuflajes oscuros La técnica básica utilizada para resistir cualquier tipo de modelo es el lavado, una técnica clásica que todavía es una de las técnicas más utilizadas en el modelado en la actualidad. Aplique los lavados después de agitar la botella con un pincel grande para seleccionar los detalles y crear sombras.
El exceso de lavado se puede eliminar fácilmente con un pincel limpio y White Spirit.
AK041
3,60€Ultrafine high quality pigment for modelling.
The definitive collection of pigments designed exclusively for modelers. A series of basic necessary and frequently used colors mixable between. AK Interactive pigments are much finer than any of the existing products on the market and contain nearly 3 times the quantity of other leading brands at a lower price .These pigments can be applied either dry of wet depending on your taste and the goal you try to achieve. Mix them with Pigment Fixer or White Spirit to apply them wet. When you decide to apply the pigments dry you can later fix them in place with either Pigment Fixer or White spirit.
Pigmento ultrafino de alta calidad para modelismo.
La colección definitiva de pigmentos diseñados exclusivamente para modelistas. Una serie de colores básicos necesarios y de uso frecuente mezclables entre ellos. Los pigmentos AK Interactive son mucho más finos que cualquiera de los productos existentes en el mercado y contienen casi 3 veces la cantidad de otras marcas líderes a un precio más bajo. Estos pigmentos se pueden aplicar en seco o en húmedo, según su gusto y el objetivo que intente lograr. Mezclarlos con Pigment Fixer o White Spirit para aplicarlos en húmedo. Cuando decida aplicar los pigmentos secos, más tarde podrá fijarlos en su lugar con Pigment Fixer o White spirit.
Engines and Metal Weathering Set
AK087
18,00€This set contains everything necessary to do great realistic effects on any type of engine or metal objects, such as tank tracks. There are two colors for the engine, for effects of dirt and grease, which can give an unbelievably real finish. For the metal objects and tracks we have designed a wash, a dark rust colored pigment and a super metal colored pigment, which has no equal on the market from any other brand or manufacturer of pigment. This steel colored pigment is very bright when you rub it, the more you rub it the shinier it gets. Also this ultra-fine pigment doesn’t contain metallic particles as you would normally find in other products on the market. Achieve a realistic steel finish like you have never seen before.
This set contains:
_ AK-082 Engine grime.
_ AK-083 Track Wash.
_ AK-084 Engine Oil.
_ AK-085 Track Rust Pigment.
_ AK-086 Dark Steel Pigment.
grey wash for kriegsmarine ships
AK303
3,60€Enamel Product.
This enamel wash is specially designed to bring out the details in gray warships typical of many nationalities from the Kriegsmarine, United States Navy, or Imperial Japanese Navy. Also it can be used in other subjects such as aircraft or gray tanks. The basic technique used to weather any type of model is the wash, a classic technique that is still one of the most used techniques in modelling today. Apply the washes after shaking the bottle with a large brush to pick out details and creating shadows.
The excess of the wash can be easily removed with a clean brush and White Spirit.
Producto Esmalte.
Este lavado de esmalte está especialmente diseñado para resaltar los detalles en los buques de guerra grises típicos de muchas nacionalidades de la Kriegsmarine, la Armada de los Estados Unidos o la Armada Imperial Japonesa. También se puede usar en otros temáticas como aviones o tanques grises. La técnica básica utilizada para envejecer cualquier tipo de maqueta es el lavado, una técnica clásica que todavía es una de las técnicas más utilizadas en el modelismo en la actualidad. Aplique los lavados después de agitar la botella con un pincel grande para seleccionar los detalles y crear sombras.
El exceso de lavado se puede eliminar fácilmente con un pincel limpio y White Spirit.
DARK BROWN WASH FOR GREEN VEHICLES
AK045
3,60€Enamel Product.
Wash dark brown indicate for green colored vehicles.
The basic technique used to weather any type of model is the wash, a classic technique that is still one of the most used techniques in modelling today. Apply the washes after shaking the bottle with a large brush to pick out details and creating shadows.
The excess of the wash can be easily removed with a clean brush and White Spirit or odorless.
Producto esmalte.
Lave el marrón oscuro para vehículos de color verde. La técnica básica utilizada para resistir cualquier tipo de modelo es el lavado, una técnica clásica que todavía es una de las técnicas más utilizadas en el modelado en la actualidad. Aplique los lavados después de agitar la botella con un pincel grande para seleccionar los detalles y crear sombras.
El exceso de lavado se puede eliminar fácilmente con un pincel limpio y White Spirit o “Odorless”.
AK077
14,40€Description language || Idioma de la descripción:
ENGLISH
This set is complete with different products to employ mud effects on your models. We have designed a special color based on Russian landscapes most notably for the battle of Kursk. We have also created a color for wet earth. To give depth and volume to the mud, we have included a plaster kit so you don’t have to spend your time looking for one enabling you to start painting your model right out of the gate. We have also included the definitive product for doing effects of dampness, rain or standing water on the surface of your model. This product is very different from all the other products on the market and you will see that with your final results.
This set is complete with a pigment based on dark earth, which you can mix with both the plaster and the wet effects product to produce some great additional effects.
This set contains:
Este set se completa con diferentes productos para emplear efectos de barro en sus modelos. Hemos diseñado un color especial basado en paisajes rusos, especialmente para la batalla de Kursk. También hemos creado un color para la tierra húmeda. Para darle profundidad y volumen al lodo, hemos incluido un kit de yeso para que no tenga que perder el tiempo buscando uno que le permita comenzar a pintar su modelo directamente. También hemos incluido el producto definitivo para hacer efectos de humedad, lluvia o agua estancada en la superficie de su modelo. Este producto es muy diferente de todos los demás productos en el mercado y lo verá con sus resultados finales.
Este set se completa con un pigmento a base de tierra oscura, que puede mezclar tanto con el yeso como con el producto de efectos húmedos para producir algunos efectos adicionales excelentes.
Este conjunto contiene:
AK093
3,60€Enamel Product.
This product allow us bring life to the details of the interior of our tanks. This wash is specially designed to be applied over the light colors of the interiors, such as RAL 9001 Cremeweiss or white. For this reason we can also use it on winter camouflaged vehicles. Ideal wash for creating the accumulation of dirt and grime on details on light colors.
The basic technique used to weather any type of model is the wash, a classic technique that is still one of the most used techniques in modelling today. Apply the washes after shaking the bottle with a large brush to pick out details and creating shadows.
The excess of the wash can be easily removed with a clean brush and White Spirit.
Producto Esmalte.
Este producto nos permite dar vida a los detalles del interior de nuestros tanques. Este lavado está especialmente diseñado para aplicarse sobre los colores claros de los interiores, como RAL 9001 Cremeweiss o blanco. Por esta razón, también podemos usarlo en vehículos camuflados en invierno. Lavado ideal para crear la acumulación de suciedad y mugre en los detalles de colores claros.
La técnica básica utilizada para envejecer cualquier tipo de modelo es el lavado, una técnica clásica que todavía es una de las técnicas más utilizadas en el modelado en la actualidad. Aplique los lavados después de agitar la botella con un pincel grande para seleccionar los detalles y crear sombras.
El exceso de lavado se puede eliminar fácilmente con un pincel limpio y White Spirit.
AK301
3,60€Enamel Product.
This enamel wash is specially designed to bring out the detail of the wooden covers typical of many warships. It can also be easily used for any other wooden subject.
Just shake well before use and you can apply it directly to your model to create contrast and depth in the details. Remove excess with a clean brush moist in Enamel Thinner. This is an enamel product and can by dissolved using our White Spirit or Odourless Turpentine.
The basic technique used to weather any type of model is the wash, a classic technique that is still one of the most used techniques in modelling today.
Producto Esmalte.
Este lavado de esmalte está especialmente diseñado para resaltar el detalle de las cubiertas de madera típicas de muchos buques de guerra. También se puede usar fácilmente para cualquier otra temática en madera.
Simplemente agítelo bien antes de usarlo y aplíquelo directamente a su modelo para crear contraste y profundidad en los detalles. Elimine el exceso con un pincel limpio húmedo en Enamel Thinner. Este es un producto en base de esmalte y se puede disolver usando nuestro White Spirit o Aguarrás inodoro.
La técnica básica utilizada para resistir cualquier tipo de modelo es el lavado, una técnica clásica que todavía es una de las técnicas más utilizadas en el modelado en la actualidad.
Streaking Grime for Light Grey Ships
AK305
3,60€Enamel Product.
With this enamel product the modeler may easily represent streaking dirt effects on ships painted in light grey. It can also be used on other issues of similar color such as aircraft or AFVs. Shake well before use. Apply your streak with a fine pointed brush in irregular vertical lines from upper parts on sides and let the paint dry for about 10 minutes. Next take a flat brush moistened in White Spirit and swipe with little pressure over the earlier applied streak to soften the effect and create a natural look.
Producto Esmalte.
Con este producto de esmalte, el modelista puede representar fácilmente efectos de suciedad en barcos pintados en gris claro. También se puede usar en otras cuestiones de color similar, como aviones o AFV. Agitar bien antes de usar. Aplique su chorretón con un pincel fino y puntiagudo en líneas verticales irregulares desde las partes superiores a los lados y deje que la pintura se seque durante unos 10 minutos. A continuación, tome un pincel plano humedecido en White Spirit y deslice con poca presión sobre la raya aplicada anteriormente para suavizar el efecto y crear un aspecto natural.
AK070
3,60€Enamel Product.
The perfect color to give contrast to details and panels on tanks painted with Panzer Grey or any grey tone. Just mix well and use a brush to apply to details, rivets, hatches, etc. and remove excess with a clean brush moist in Enamel Thinner.
The basic technique used to weather any type of model is the wash, a classic technique that is still one of the most used techniques in modelling today.
Producto Esmalte.
El color perfecto para dar contraste a los detalles y paneles en tanques pintados con Gris Panzer o cualquier tono gris. Simplemente mezcle bien y use un pincel para aplicar a los detalles, remaches, escotillas, etc. y elimine el exceso con un pincel limpio húmedo en Enamel Thinner.
La técnica básica utilizada para envejecer cualquier tipo de modelo es el lavado, una técnica clásica que todavía es una de las técnicas más utilizadas en el modelismo en la actualidad.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.