• View as:
  • Sidebar
  • Sort by:
  • Streaking Grime

    AK012

    3,50

    Enamel type streaking for modelling.
    Create realistic dirt streaks and grime effects easily with this dirty color.
    This enamel product creates realistic streaking grime effects on your models. Easy to apply. Very realistic coloristic color.
    Shake well before use. Apply your streak with a fine pointed brush in irregular vertical lines from upper parts on sides and let the paint dry for about 10 minutes. Next take a flat brush moisted in White Spirit and swipe with little pressure over the earlier applied streak to soften the effect and create a natural look.

  • Rust Streaks

    AK013

    3,50

    Enamel type streaking for modelling.
    Rust and corrosion streaks and stains are easily produced using this reddish-brown color.
    Shake well before use. Apply your streak with a fine pointed brush in irregular vertical lines from upper parts on sides and let the paint dry for about 10 minutes. Next take a flat brush moisted in White Spirit and swipe with little pressure over the earlier applied streak to soften the effect and create a natural look.

  • Winter Streaking Grime

    AK014

    3,50

    Enamel type streaking for modelling.
    Light grey color ideal for creating dirt streaks on light or white colored surfaces. Also suitable for other effects such as add chromatic richness to any piece or surface. Shake well before use. Apply your streak with a fine pointed brush in irregular vertical lines from upper parts on sides and let the paint dry for about 10 minutes. Next take a flat brush moisted in White Spirit and swipe with little pressure over the earlier applied streak to soften the effect and create a natural look.

  • Dust Effects

    AK015

    3,50

    Enamel type product for modelling.
    This is an enamel product to recreate natural dust effects. Simply apply it to your vehicle wheels, tracks and hull to achieve the most realistic effect possible. You can also mix this product with plaster if you want to give your dust volume.
    Shake well before use and use in parts desired of your model. Afterwards, blend using a wide flat brush dampened with AK Interactive White Spirit.

  • Fresh Mud

    AK016

    3,50

    Enamel type product for modelling.
    A product to replicate natural fresh mud. This Dark brown enamel effect is ideally suited for creating muddy surfaces. It can be also mix with plaster to create volume. Apply with a brush or airbrush and then fade with a clean brush moist with Enamel Thinner. Just apply to your vehicle wheels, tracks and hull to achieve the most realistic effect.

  • Earth Effects

    AK017

    3,50

    Enamel type product for modelling.
    An enamel product to make natural earth and mud type effects. Just apply to your vehicle wheels, tracks and hull to achieve ultra realistic earth effects. You can also mix this product with plaster to make mud with volume. This product can be mixed with our other earth colors leading to unlimited possibilities of nature effects. AFRICA DUST EFFECTS 35ml.
    Enamel type product for modelling.
    Realist color to make dust effects in vehicles of the Africa Korps, British or even modern. Light tan color is suited to creating dusty accumulations on surfaces. Apply with a brush or airbrush and then fade with a clean brush moist with Enamel Thinner.

  • Dark Streaking Grime

    AK024

    3,50

    Enamel type streaking for modelling.

    Darkest color in our range specifically suited for streaking effects over dark colored vehicles and surfaces. Also suitable for other effects such as add chromatic richness to any piece or surface.
    Shake well before use. Apply your streak with a fine pointed brush in irregular vertical lines from upper parts on sides and let the paint dry for about 10 minutes. Next take a flat brush moisted in White Spirit and swipe with little pressure over the earlier applied streak to soften the effect and create a natural look.

  • Fuel Stains

    AK025

    3,50

    Enamel type effect for modelling
    The definitive mixture to make fuel spilled effects in any type of modern or classic vehicle. This is not product to make oil and grease effects. This product is good mainly to make fuel spilled effects only with a great realism. This product is enamel and it can be blended with the rest of our colors and it is diluted with our White Spirit.

  • Slimy Grime Dark

    AK026

    3,50

    Enamel type effect for modelling.
    This dark green colored effect is perfect for creating fresh moss and slimy surfaces caused by dampness. Apply and fade with a clean brush moist with Enamel Thinner. Ships, boats, ports, wooden doors and many amphibious vehicles show this effect very particular due to the water and the humidity. Observe real pictures to use them like reference in your models.
    You can combined with Slimy grime Light.

  • Slimy Grime Light

    AK027

    3,50

    Enamel type effect for modelling.
    This light green colored effect is perfect for creating moss and slimy surfaces caused by dampness. Apply and fade with a clean brush moist with Enamel Thinner. Ships, boats, ports, wooden doors and many amphibious vehicles show this effect very particular due to the water and the humidity. Observe real pictures to use them like reference in your models.
    You can combined with Slimy grimeDark.

  • Streaking Grime for DAK Vehicles

    AK067

    3,50

    Enamel type streaking for modelling.
    Grimy grey colored effect ideally suited for creating streaks of dirt over sand and light colored surfaces. Also suitable for other effects such as add chromatic richness to any piece or surface.
    Shake well before use. Apply your streak with a fine pointed brush in irregular vertical lines from upper parts on sides and let the paint dry for about 10 minutes. Next take a flat brush moisted in White Spirit and swipe with little pressure over the earlier applied streak to soften the effect and create a natural look.

  • Streaking Grime for Panzer Grey

    AK069

    3,50

    Enamel type streaking for modelling.
    A very special product for doing streaking grime effects over dark grey surfaces such as German vehicles painted with Panzer Grey. Also suitable for other effects such as add chromatic richness to any piece or surface. This enamel should be mixed well and then painted in vertical lines on the sides of the model. After, you just blend with a clean brush moist with Enamel Thinner to produce some great realistic streaking grime effects.

  • Rain Marks for NATO Tanks

    AK074

    3,50

    Enamel type streaking for modelling.

    A unique Streaking Grime effect specifically designed for vehicles painted in a tri-color camouflage scheme like those used by NATO but can be used in any vehicle. Create realistic streaks and rainmarks with this light colored enamel effect. Shake well before use. Apply your streak with a fine pointed brush in irregular vertical lines from lower parts on sides and let the paint dry for about 10 minutes. Next take a flat brush moisted in White Spirit and swipe with little pressure over the earlier applied streak to soften the effect and create a natural look.

  • Wet Effects Fluid

    AK079

    3,50

    Enamel type effect for modelling
    Rain, puddles, streaking water and lots of other similar effects can be done using this excellent product. Use it to add a slight sheen creating the appearance of dampness, moisture, and wetness. This product has the perfect solution, for simulating with great realism for all those effects you can see on any type of vehicle. This is not a shiny varnish, it has been specially designed for these kind effects, offering different intensities to the brightness depending on the surface.

  • Engine Grime

    AK082

    3,50

    Enamel type effect for modelling
    Obtain a greyish, dark and matt aspect that you find on many engines that have had a lot of use. Apply with a brush or an airbrush to obtain different results. Blend with a clean brush moist with Enamel Thinner.

  • Fresh Engine Oil

    AK084

    3,50

    Enamel type effect for modelling
    The engines and transmissions of many vehicles offer a special aspect where the grease and the remains of spilt fuel are the protagonists. These enamel based effects just need to be painted on. Apply with a brush in different lays of different intensities for the most realistic effects. For a lighter effect you can dilute them with White spirit.

  • Streaking Grime for Interiors

    AK094

    3,50

    Enamel type streaking for modelling.
    With this product we can create a streaking grime effect on the light tones of the interior of all of our vehicles.
    Shake well before use. Apply your streak with a fine pointed brush in irregular vertical lines from upper parts on sides and let the paint dry for about 10 minutes. Next take a flat brush moisted in White Spirit and swipe with little pressure over the earlier applied streak to soften the effect and create a natural look.

  • OIF & OEF – US Vehicles Streaking Effects

    AK123

    3,50

    Enamel type streaking for modelling.
    Ideal color for creating dirt steaks on sand and light brown colored vehicles. Also suitable for other effects such as add chromatic richness to any piece or surface. These days, the streaking dirt effect is one of the many effects that we can find on nearly all of the American vehicles. This dirt is a very specific color characteristic when it is seen over the American sand color FS 33446. This color will make the work easier and you can achieve an extremely realistic finish to your model. Just shake well and it is ready to use. Apply lines from the upper part of plate and then fade with a clean brush moist with Enamel Thinner.

  • KEROSENE LEAKS AND STAINS

    AK2039

    3,50

    Enamel type effect for modelling
    The definitive mixture to make kerosene spilled effects in any type of modern or classic aircrafts. This is not product to make oil and grease effects. This product is good mainly to make kerosene spilled effects only with a great realism. This product is enamel and it can be blended with the rest of our colors and it is diluted with our White Spirit.

  • Brown Streaking Grime for Red Hulls

    AK304

    3,50

    Enamel type streaking for modelling.

    With this enamel product the modeler may easily represent streaking dirt effects on ship hulls painted in red primer. It can also be used on other issues such as the hull of a tank. Shake well before use. Apply your streak with a fine pointed brush in irregular vertical lines from upper parts on sides and let the paint dry for about 10 minutes. Next take a flat brush moistened in White Spirit and swipe with little pressure over the earlier applied streak to soften the effect and create a natural look.

  • Showing 1–20 of 22 results

Current category:
-

Streaking

No products were found matching your selection.

Navigation

MY CART

Close

No products in the cart.

No products in the cart.

COOKIES

AK Interactive uses cookies to give the best user experience. If you continue browsing, you are consenting to the acceptance of the aforementioned cookies and the acceptance of our cookies policy
Click on the link for more information. ACEPTAR

Aviso de cookies