- View as:
- Filter your selectionFiltra tu selección
- Ordenar por:
-
AIRBRUSH FLOW IMPROVER for ACRYLICS – 100ml
AK11510
6,50€ENGLISHThis product delays the drying of acrylic paint at the airbrush tip, minimizing clogging and improving paint flow.
Add 1 drop of Flow Improver for every 5 drops of paint in the cup of your airbrush and improve its fluidity.
It is especially recommended for work on large surfaces that require a continuous flow of paint for a longer period of time or under high temperatures where faster drying of the paint may occur.
Volume: 100ml
Este producto retrasa el secado de la pintura acrílica en la punta del aerógrafo, minimizando la obstrucción y mejorando el flujo de pintura.
Añade 1 gota de Flow Improver por cada 5 de pintura en la copa de tu aerógrafo y mejora su fluidez.
Está especialmente recomendado para trabajos sobre grandes superficies que requieren un flujo continuo de pintura durante más tiempo o bajo temperaturas altas donde puede producirse un secado mas rápido de la pintura.
Volumen: 100ml
-
Fluido para bruñir metal (Metal Burnishing)
AK159
7,25€ENGLISHSepcial Product.
A new faster formula (works in seconds), and at a more competitive price.
We have extensively tested and formulated, and improved this product, here at AK-Interactive. With our Metal Burnishing fluid, you can naturally weather and rust white metal tracks, such as those made by Friulmodel or ours. Just dip the tracks in the liquid for a few seconds and the metal will begin to appear dark and rusty very quickly, easily and effortlessly. You can vary the effect using different dilutions and varying lengths of soak.
Using less product, you can achieve even better results than with our previous formula.
** Watch here Rick Lawler’s video on how to use it.
Producto Especial.
Una nueva fórmula más rápida (funciona en segundos) y a un precio más competitivo.
Hemos probado, formulado y mejorado este producto para que se adapte mejor a los requisitos de los modelistas. Con nuestro fluido Metal Burnishing, puede envejecer y oxidar naturalmente las cadenas de metal blanco, como las fabricadas por Friulmodel o otras marcas. Simplemente sumerja las cadenas en el líquido durante unos segundos y el metal comenzará a aparecer oscuro y oxidado muy rápido, de forma fácil y sin esfuerzo.
Puede variar el efecto usando diferentes diluciones y diferentes tiempos de remojo.
** Consulta aquí el vídeo de Rick Lawler sobre cómo utilizarlo.
-
PHOTOETCH BURNISHING – BRUÑIDO DE FOTOGRABADOS
AK174
7,25€ENGLISHNew formula, improved, faster and at a more competitive price. This liquid will darken the photo etch brass parts, and also barrels of machine guns and tank barrels. The end result with brass parts is a finish which is very similar to steel.
It is highly recommended to darken your photo-etch parts before use.
ESPAÑOLNueva fórmula, mejorada y más rápida. Este líquido oscurecerá las piezas de latón de fotograbado, también cañones de ametralladoras y los cañones de los tanques. El resultado final con piezas de latón es un acabado muy similar al acero y con mejor agarre al pegamento y a la soldadura ya que actúa sobre la ultima capa pulida de la pieza.
Se recomienda encarecidamente oscurecer las piezas de fotograbado antes de usar.