SKU: HASE 09143

JT43 – 1/48 A6M2b ZERO FIGHTER TYPE 21 (ZEKE)

25,95

Hay existencias

*Please check our Privacy Policies to see how to we use your personal data.

*Por favor revisa nuestra Política de Privacidad para ver como tratamos tus datos personales

ENGLISH

Scale … 1:48
Part number ……… JT43

The Zero fighter is a fighter that was active as the main fighter of the Japanese Navy.
The maneuverability was outstanding, and the firepower, speed, etc. exceeded the level of warfare at that time, surpassing even land fighters.

It was on October 5, 1945 that the plan request for 12 test-ship fighter aircraft was issued to both Mitsubishi and Nakajima as the main carrier-capable fighter aircraft after 96 warships .
Mitsubishi started the design with Jiro Horikoshi as the chief engineer.
Based on the technology cultivated in the 96th battle, Mr. Horikoshi made a further design such as reduction of weight and resistance.
In addition, variable-pitch propellers, retractable legs, split structure, water drop type sealed windshield, streamlined drop tank, adoption of Crucie radio return direction measuring device, use of
ESD (super duralumin), equipment inside the wing of 20 mm machine gun, etc.
A new attempt was incorporated, and the 12th test ship battle (A6M1) Unit 1 was completed with the Ruisei 13 type (lifting output 780 horsepower).

The first flight was carried out in April 2014, and Unit 1 recorded a speed exceeding 491 km / h during in-house tests and achieved good results. After that, the propeller was changed from two wings to three wings, and the elevator control device After minor repairs such as deterioration of steel , it was handed over to the Navy in September and the examination was started.

Immediately after the start of the test, it was decided to call the additional prototype after Unit 3 with the Sakae 12 type (lifting output 940 horsepower) and the tail wing arrangement changed, and there was an aerial disassembly accident during the examination. was though, it has been found to be good feature airplane, A6M2 was officially adopted as the type-0 No. 1 fighter machine type 1.
(Renamed to A6M2a, Zero fighter type 11 in 1945) Compared to A6M1 , the A6M2 equipped with Sakae 12 type has a total length of 270 mm and a weight increase of 19 kg, but the maximum speed has improved to 533.4 km / h.

A total of 64 types of 11 were made and sent to the Chinese front before official adoption at the request of local troops.
Since Type 11 was used as a land fighter, it is not equipped as a warship.
In addition, since the 11-inch wing tip used as a land fighter did not have a folding mechanism, a mechanism to fold the wing tip by 50 cm has been added to the aircraft after Unit 67 to facilitate handling on the aircraft carrier.

In addition, it has been equipped with a Crucie radio return direction measuring device, landing hook, and other equipment for battle, and has been adopted as the Zero fighter type 1 carrier-capable fighter type 2 (later renamed the Zero fighter type 21 and A6M2b).

These zero battles were manipulated by skilled crew members and demonstrated strength that seemed invincible on various fronts.

«data»

Crew: 1 person
Overall width:
12.00m
Overall length: 9.060m Overall height: 3.570m
Maximum speed: 533.4km / h (4,300m)
Engine: «Sakae» 12 type ( separation output 940hp)

 

ESPAÑOL

Escala … 1:48
Número de pieza ……… JT43

El caza Zero es un caza que estuvo activo como el caza principal de la Armada japonesa.
La maniobrabilidad fue sobresaliente, y la potencia de fuego, velocidad, etc. excedió el nivel de guerra en ese momento, superando incluso a los cazas terrestres.

Fue el 5 de octubre de 1945 que se emitió la solicitud de plan para 12 aviones de combate de barcos de prueba a Mitsubishi y Nakajima como el principal avión de combate con capacidad para portaaviones después de 96 buques de guerra.
Mitsubishi comenzó el diseño con Jiro Horikoshi como ingeniero jefe.
Basado en la tecnología cultivada en la batalla número 96, el Sr. Horikoshi hizo un diseño adicional como la reducción de peso y resistencia.
Además, hélices de paso variable, patas retráctiles, estructura dividida, parabrisas sellado tipo gota de agua, tanque de caída aerodinámico, adopción del dispositivo de medición de dirección de retorno de radio Crucie, uso de
ESD (superduraluminio), equipamiento dentro del ala de ametralladora de 20 mm, etc.
Se incorporó un nuevo intento y se completó la unidad 1 de la 12ª batalla de barcos de prueba (A6M1) con el tipo Ruisei 13 (potencia de elevación de 780 caballos de fuerza).

El primer vuelo se realizó en abril de 2014, y la Unidad 1 registró una velocidad superior a 491 km / h durante las pruebas internas y obtuvo buenos resultados. Posteriormente, se cambió la hélice de dos alas a tres alas, y el dispositivo de control del elevador. Luego de reparaciones menores como el deterioro del acero, se entregó a la Armada en septiembre y se inició el examen.

Inmediatamente después del inicio de la prueba, se decidió llamar al prototipo adicional después de la Unidad 3 con el tipo Sakae 12 (potencia de elevación 940 caballos de fuerza) y la disposición del ala trasera cambió, y hubo un accidente de desmontaje aéreo durante el examen. Sin embargo, se ha descubierto que es un buen avión de características, el A6M2 fue adoptado oficialmente como el tipo 1 de máquina de combate n. ° 1 tipo 1.
(Renombrado a A6M2a, Zero fighter type 11 en 1945) En comparación con A6M1, el A6M2 equipado con el tipo Sakae 12 tiene una longitud total de 270 mm y un aumento de peso de 19 kg, pero la velocidad máxima ha mejorado a 533,4 km / h.

Se fabricaron un total de 64 tipos de 11 y se enviaron al frente chino antes de la adopción oficial a pedido de las tropas locales.
Dado que el Tipo 11 se utilizó como caza terrestre, no está equipado como buque de guerra.
Además, dado que la punta del ala de 11 pulgadas utilizada como caza terrestre no tenía un mecanismo de plegado, se ha agregado un mecanismo para doblar la punta del ala en 50 cm a la aeronave después de la Unidad 67 para facilitar el manejo en el portaaviones.

Además, ha sido equipado con un dispositivo de medición de dirección de retorno por radio Crucie, gancho de aterrizaje y otros equipos para la batalla, y ha sido adoptado como el caza Zero Fighter tipo 1 con capacidad para portaaviones tipo 2 (más tarde rebautizado como Zero Fighter tipo 21 y A6M2b).

Estas cero batallas fueron manipuladas por hábiles miembros de la tripulación y demostraron una fuerza que parecía invencible en varios frentes.

«datos»

Tripulación: 1 persona
Ancho promedio:
12,00 m
Longitud total: 9.060 m Altura total: 3.570 m
Velocidad máxima: 533,4 km / h (4.300 m)
Motor: tipo «Sakae» 12 (salida de separación 940 CV)

 

"Informacion Exclusiva del producto"

Información adicional

Peso 0,65 kg
Dimensiones 34 × 19 × 5 cm
Ejército

Japonés

Marcas

Materiales

Plástico

Producto

,

Pack

Individual

Escala

1/48

Temática

Aeronave, Militar

RELACIONADOS