Weight | 1.22 kg |
---|---|
Dimensions | 38 × 23 × 7 cm |
Army | French |
AK Points
Availability: In stock
21,95€
Weight | 1.22 kg |
---|---|
Dimensions | 38 × 23 × 7 cm |
Army | French |
TOP LINE DELUXE Marta Kolinsky KIT
ABT850
78,75€ABT114
6,50€For precision works is necessary to keep the tip of your brushes in a perfect state. This gel is indicated to keep the tip sharp and in perfect use condition with all brushes fibers compacted and never open or deformed. With this gel you will keep your brushes always like new ones after using and cleaning them (it can be used after the application of our ABT117 Magic Potion for Brushes or any other chemical or natural cleaner).
Para trabajos de precisión es necesario mantener la punta de sus pinceles en perfecto estado. Este gel está indicado para mantener la punta afilada y en perfecto estado de uso con todas las fibras de los pinceles compactadas y nunca abiertas o deformadas. Con este gel mantendrá sus pinceles siempre como nuevos después de usarlos y limpiarlos (se puede utilizar después de la aplicación de nuestra Poción Mágica para Pinceles ABT117 o cualquier otro limpiador químico o natural).
AK183
5,25€The original one.
A high quality ultra matte varnish which can be applied with a brush or an airbrush to achieve a dead flat finish on any surface.
Acrylic Ultra Matte Varnish formulated for maximum airbrush performance. Water soluble, odorless, and non-toxic. Shake before each use. We recommend AK-712 Acrylic Thinner for thinning. Dries completely in 12 hours.
60 ml.
El Original.
Barniz ultra mate de alta calidad que puede ser aplicado con pincel o con aerógrafo para lograr un acabado mate en cualquier superficie.
Nuestro barniz ultra mate acrílico está formulado para el máximo rendimiento del aerógrafo. Soluble en agua, inodoro y no tóxico. Agitar antes de cada uso. Recomendamos AK-712 Acrylic Thinner para diluir. Se seca completamente en 12 horas.
60 ml.
MAGNET ULTRA RESISTANT CYANOCRYLATE GLUE
AK12015
7,60€20g.
General-purpose cyanoacrylate 401. Fast drying, extra strong, low viscosity, specially formulated for adhesion between materials that can even have an acidic surface. Can be used with rubber, leather, wood, metal, resin and plastic. The surfaces to be joined must be free of dirt, dust and grease. A small amount of adhesive should be applied; more cyanoacrylate does not guarantee a better bond and makes more difficult the drying of the adhesive that is effective for bonding.
– 99% Cyano.
– Ethyl cyanoacrylate
– Use temperature: -55º to 120º
– Set time: between 3 and 10 seconds. The gaps and uneven surfaces can increase this setting time. It is not necessary to use clamps. Holding the pieces firmly for 10-30 seconds will ensure better adhesion.
– Definitive cure time: 24 h
– Viscosity: 110 mPa.S
– Shear strength: 21.0 MPa
* Bottles are not filled at a 100% to leave some air and make it work properly.
20g.
Cianoacrilato de uso general 401, secado rápido, extra fuerte, baja viscosidad especialmente formulado para la adhesión entre materiales que incluso pueden tener una superficie ácida. Se puede usar con caucho, cuero, madera, metal, resina y plástico. Las superficies a unir deben estar libres de suciedad, polvo y grasa. Se debe aplicar una pequeña cantidad de adhesivo; más cianoacrilato no garantiza una mejor unión y hace más difícil el secado del adhesivo que es efectivo para la unión.
– 99% Cyano
– Cianoacrilato de etilo
– Temperatura de uso: -55º a 120º
– Tiempo de fraguado: entre 3 y 10 segundos. Los huecos y las superficies irregulares pueden aumentar este tiempo de fraguado. No es necesario usar abrazaderas. Sostener las piezas firmemente durante 10-30 segundos asegurará una mejor adhesión.
– Tiempo de curado definitivo: 24 h.
– Viscosidad: 110 mPa.S
– Resistencia al corte: 21.0 MPa
*Las botellas no se llenan al 100% para dejar algo de aire y que funcione correctamente.
AK11505
7,95€
FA 614
18,95€A set designed for thorough cleaning of any airbrush.
A glass jar with a plastic screw cap is used to purge the airbrush with the cleaner after each use. Thanks to a special filter in the upper part, all impurities and liquid remain in the container. Additionally, the lid is equipped with an airbrush stand.
Cleaners and rods are used to thoroughly clean various elements of airbrushes: tips, nozzles, bodies and other elements. The needle, on the other hand, cleans the inside of the airbrush nozzle or other internal parts of the airbrush, such as the needle guide channel.
Container Height: 85mm, diameter: 100mm.
Un conjunto diseñado para la limpieza a fondo de cualquier aerógrafo.
Se usa un frasco de vidrio con un tapón de rosca de plástico para purgar el aerógrafo con el limpiador después de cada uso. Gracias a un filtro especial en la parte superior, todas las impurezas y líquidos permanecen en el recipiente. Además, la tapa está equipada con un soporte para aerógrafo.
Los limpiadores y las varillas se utilizan para limpiar a fondo varios elementos de los aerógrafos: puntas, boquillas, cuerpos y otros elementos. La aguja, por otro lado, limpia el interior de la boquilla del aerógrafo u otras partes internas del aerógrafo, como el canal de guía de la aguja.
Altura del contenedor: 85 mm, diámetro: 100 mm.
SURVIVAL WEATHERING BRUSHES SET
AK663
12,20€An arsenal of brushes designed by the weathering experts here at AK. Top quality weathering products require the right tools to be applied; our Survival Weathering Brush set is the right set of tools you need. Contained in this set are the brushes needed to streak, chip, wash, and apply pigments plus much more.
Includes:
Un arsenal de pinceles diseñados por los expertos en weathering de AK. Los productos de weathering de alta calidad requieren una aplicación con las herramientas adecuadas; nuestro juego de pinceles de supervivencia es el conjunto de herramientas adecuado que necesitas. En este juego se encuentran los pinceles necesarios para hacer líneas, desconchar, hacer lavados, aplicar pigmentos y mucho más.
Incluye:
AK8064
12,75€The Wet Palette is a tool mainly used by figure painters, but more and more it is being used by people that paint with acrylics any kind of model. It will extend the useful life of any acrylic so that it can be used for hours and once shut it will preserve the colors and color mixtures. It can be kept in the fridge.
It has three components:
1.Sponge, to hold large quantities of water, since it is quite thick.
2.Cloth made of fiber, placed on top of the sponge as a leveler, humidity filter, and as an interchangeable element in case of stains or if not used for a long time.
3.High quality special Paper, made of a fine silicone film, allows the transfer of humidity but prevents water forming and paints from dissolving, and does not give off any fibers not hairs when worked with the brushes.
The Wet Palette is watertight and airtight, made of the same material of marine containers for flares, charts, and medicines. Its locks guarantee the seal. This extends the life of paints, especially in Summer, hot climates, and under extreme conditions.
*Dimensions: 16 x 13 x 4 cm.
It contains:
?· Need more info? Click here
La paleta húmeda es una herramienta utilizada principalmente por los pintores de figuras, pero cada vez más es utilizada por las personas que pintan con acrílicos cualquier tipo de modelo. Prolonga la vida útil de cualquier acrílico para que pueda ser utilizado durante horas y, una vez cerrado, conserva los colores y las mezclas de colores. Se puede conservar en la nevera.
Tiene tres componentes:
1.Esponja, para retener grandes cantidades de agua, ya que es bastante gruesa.
2.Paño de fibra, colocado encima de la esponja como nivelador, filtro de humedad, y como elemento intercambiable en caso de manchas o si no se utiliza durante mucho tiempo.
3.Papel especial de alta calidad, hecho de una fina película de silicona, permite la transferencia de humedad pero evita que se forme agua y que se disuelvan las pinturas, y no desprende fibras ni pelos cuando se trabaja con los pinceles.
La paleta húmeda es estanca y hermética, fabricada con el mismo material de los contenedores marinos para bengalas, cartas de navegación y medicamentos. Sus cierres garantizan la estanqueidad. Esto prolonga la vida de las pinturas, especialmente en verano, en climas cálidos y en condiciones extremas.
*Dimensiones: 16 x 13 x 4 cm.
Contiene:
¿Necesita más información? Haga clic aquí
Aircraft scale modelling F.A.Q.
57,00€
380 Pages. Soft Cover. More than 2.500 images.
This book is a compilation of aircraft scale modelling techniques, step by step guides with hundreds of colour pictures for WWI, WWII, cold war and modern aircraft, showing a wide range of painting and weathering techniques. All aspects of aircraft modelling are covered in a way that is both easy to understand and follow. From tools, and how to use various materials, to camouflage painting, markings, engines, pilots, etc. This is a must have for aircraft modelers. F.A.Q. is a compendium of the main techniques used in aircraft modelling, explained from a beginner level, through to the most complex of tasks. Created by world famous modeler, Daniel Zamarbide, and aided by the most prominent aircraft modelers in Europe. A perfect tool for aircraft modelling enthusiasts.
GET YOUR DIGITAL COPY AT AK-INTERACTIVE APP for iOS and Android
380 Páginas. Tapa blanda. Más de 2.500 imágenes.
Este libro es una compilación de técnicas de modelismo aeronáutico, guías paso a paso con cientos de imágenes en color de la Primera Guerra Mundial, la Segunda Guerra Mundial, la guerra fría y los aviones modernos, que muestran una amplia gama de técnicas de pintura y envejecimiento. Todos los aspectos del modelismo de aviones están cubiertos de una manera que es fácil de entender y seguir. Desde herramientas y cómo usar diversos materiales, hasta pintura de camuflaje, marcas, motores, pilotos, etc. Esto es imprescindible para los modelistas de aviones. Aircraft F.A.Q. es un compendio de las principales técnicas utilizadas en el modelismo de aeronaves, explicado desde un nivel principiante, hasta las tareas más complejas. Creado por el mundialmente famoso modelista, Daniel Zamarbide, y ayudado por los modelistas de aviones más destacados de Europa. Una herramienta perfecta para los entusiastas del modelismo aeronáutico.
OBTENGA SU COPIA DIGITAL EN LA APLICACIÓN AK-INTERACTIVE para iOS y Android
AK9204
6,50€ENGLISH
TOP LINE DELUXE Marta Kolinsky KIT
ABT850
78,75€ABT114
6,50€For precision works is necessary to keep the tip of your brushes in a perfect state. This gel is indicated to keep the tip sharp and in perfect use condition with all brushes fibers compacted and never open or deformed. With this gel you will keep your brushes always like new ones after using and cleaning them (it can be used after the application of our ABT117 Magic Potion for Brushes or any other chemical or natural cleaner).
Para trabajos de precisión es necesario mantener la punta de sus pinceles en perfecto estado. Este gel está indicado para mantener la punta afilada y en perfecto estado de uso con todas las fibras de los pinceles compactadas y nunca abiertas o deformadas. Con este gel mantendrá sus pinceles siempre como nuevos después de usarlos y limpiarlos (se puede utilizar después de la aplicación de nuestra Poción Mágica para Pinceles ABT117 o cualquier otro limpiador químico o natural).
AK183
5,25€The original one.
A high quality ultra matte varnish which can be applied with a brush or an airbrush to achieve a dead flat finish on any surface.
Acrylic Ultra Matte Varnish formulated for maximum airbrush performance. Water soluble, odorless, and non-toxic. Shake before each use. We recommend AK-712 Acrylic Thinner for thinning. Dries completely in 12 hours.
60 ml.
El Original.
Barniz ultra mate de alta calidad que puede ser aplicado con pincel o con aerógrafo para lograr un acabado mate en cualquier superficie.
Nuestro barniz ultra mate acrílico está formulado para el máximo rendimiento del aerógrafo. Soluble en agua, inodoro y no tóxico. Agitar antes de cada uso. Recomendamos AK-712 Acrylic Thinner para diluir. Se seca completamente en 12 horas.
60 ml.
MAGNET ULTRA RESISTANT CYANOCRYLATE GLUE
AK12015
7,60€20g.
General-purpose cyanoacrylate 401. Fast drying, extra strong, low viscosity, specially formulated for adhesion between materials that can even have an acidic surface. Can be used with rubber, leather, wood, metal, resin and plastic. The surfaces to be joined must be free of dirt, dust and grease. A small amount of adhesive should be applied; more cyanoacrylate does not guarantee a better bond and makes more difficult the drying of the adhesive that is effective for bonding.
– 99% Cyano.
– Ethyl cyanoacrylate
– Use temperature: -55º to 120º
– Set time: between 3 and 10 seconds. The gaps and uneven surfaces can increase this setting time. It is not necessary to use clamps. Holding the pieces firmly for 10-30 seconds will ensure better adhesion.
– Definitive cure time: 24 h
– Viscosity: 110 mPa.S
– Shear strength: 21.0 MPa
* Bottles are not filled at a 100% to leave some air and make it work properly.
20g.
Cianoacrilato de uso general 401, secado rápido, extra fuerte, baja viscosidad especialmente formulado para la adhesión entre materiales que incluso pueden tener una superficie ácida. Se puede usar con caucho, cuero, madera, metal, resina y plástico. Las superficies a unir deben estar libres de suciedad, polvo y grasa. Se debe aplicar una pequeña cantidad de adhesivo; más cianoacrilato no garantiza una mejor unión y hace más difícil el secado del adhesivo que es efectivo para la unión.
– 99% Cyano
– Cianoacrilato de etilo
– Temperatura de uso: -55º a 120º
– Tiempo de fraguado: entre 3 y 10 segundos. Los huecos y las superficies irregulares pueden aumentar este tiempo de fraguado. No es necesario usar abrazaderas. Sostener las piezas firmemente durante 10-30 segundos asegurará una mejor adhesión.
– Tiempo de curado definitivo: 24 h.
– Viscosidad: 110 mPa.S
– Resistencia al corte: 21.0 MPa
*Las botellas no se llenan al 100% para dejar algo de aire y que funcione correctamente.
AK11505
7,95€
FA 614
18,95€A set designed for thorough cleaning of any airbrush.
A glass jar with a plastic screw cap is used to purge the airbrush with the cleaner after each use. Thanks to a special filter in the upper part, all impurities and liquid remain in the container. Additionally, the lid is equipped with an airbrush stand.
Cleaners and rods are used to thoroughly clean various elements of airbrushes: tips, nozzles, bodies and other elements. The needle, on the other hand, cleans the inside of the airbrush nozzle or other internal parts of the airbrush, such as the needle guide channel.
Container Height: 85mm, diameter: 100mm.
Un conjunto diseñado para la limpieza a fondo de cualquier aerógrafo.
Se usa un frasco de vidrio con un tapón de rosca de plástico para purgar el aerógrafo con el limpiador después de cada uso. Gracias a un filtro especial en la parte superior, todas las impurezas y líquidos permanecen en el recipiente. Además, la tapa está equipada con un soporte para aerógrafo.
Los limpiadores y las varillas se utilizan para limpiar a fondo varios elementos de los aerógrafos: puntas, boquillas, cuerpos y otros elementos. La aguja, por otro lado, limpia el interior de la boquilla del aerógrafo u otras partes internas del aerógrafo, como el canal de guía de la aguja.
Altura del contenedor: 85 mm, diámetro: 100 mm.
Road Barriers (2×2 & 2×4) 1/35
RTD35639-K
11,50€High-detailed Diorama Set.
Includes detailed Ceramic
Conjunto de diorama muy detallado.
Incluye piezas de cerámica detalladas
US Navy Corpsmen & Signalman Utah beach, Normandy 1/35
TB 35179
50,00€2 figures.
Sculpted by Stefano D’Antonio ‘the Lebanese’
Boxart painted by Enrico Cigersa
3 figuras.
Esculpido por Stefano D’Antonio ‘el libanés’
Boxart pintado por Enrico Cigersa
MJEZ35020
16,95€SCALE : 1/35
3D PRINTED
EASY ASSEMBLING AND HIGH RESOLUTION.
ESCALA: 1/35
IMPRESO EN 3D
FÁCIL MONTAJE Y ALTA RESOLUCIÓN.
AH-1G Cobra (late production), US Attack Helicopter 1/32
ICM 32061
73,95€The AH-1G combat helicopter has conceived as a fire support helicopter. Due to its firepower, the term “aerial artillery” coined during the Vietnam War, was often applied to it. The main armament mounted on a turret in the nose part of the helicopter was a six-barreled Minigun 7.62 mm machine gun with a clip of 4,000 rounds and an M129 40 mm grenade launcher with 300 rounds of ammunition. Other types of weapons also were used.
In 1972, the Vietnamese began to use the Soviet “Strela” man-portable anti-aircraft system to attack low-flying targets. They were very successful against helicopters, including Cobras. Some helicopters were equipped with a device that diverted hot gases from the working engine upwards to protect them from the homing heads mounted on the Arrows. And as practice showed, this had the necessary effect. To capture helicopters modified in this way, the sensitivity of the Arrow’s homing head was insufficient.
During the war in Southeast Asia, the Cobras demonstrated excellent survivability and proved themselves to be a reliable and powerful ground support aircraft.
Scale
1:32
Time period
After 1950
Model size (length x width)
422 x 106 mm
Box size
410 x 260 x 100 mm
Number of details
241
El helicóptero de combate AH-1G se ha concebido como un helicóptero de apoyo contra incendios. Debido a su potencia de fuego, el término “artillería aérea”, acuñado durante la Guerra de Vietnam, se le aplicó a menudo. El armamento principal montado en una torreta en la parte delantera del helicóptero era una ametralladora Minigun de 7,62 mm de seis cañones con un cargador de 4.000 rondas y un lanzagranadas M129 de 40 mm con 300 rondas de munición. También se utilizaron otros tipos de armas.
En 1972, los vietnamitas comenzaron a utilizar el sistema antiaéreo portátil “Strela” soviético para atacar objetivos en vuelo bajo. Tuvieron mucho éxito contra helicópteros, incluidos Cobras. Algunos helicópteros estaban equipados con un dispositivo que desviaba los gases calientes del motor en funcionamiento hacia arriba para protegerlos de los cabezales de retorno montados en los Arrows. Y como demostró la práctica, esto tuvo el efecto necesario. Para capturar helicópteros modificados de esta manera, la sensibilidad de la cabeza de retorno del Arrow fue insuficiente.
Durante la guerra en el sudeste asiático, los Cobras demostraron una excelente capacidad de supervivencia y demostraron ser un avión de apoyo terrestre confiable y poderoso.
Escala
1:32
Periodo de tiempo
Después de 1950
Tamaño del modelo (largo x ancho)
422 x 106 mm
Tamaño de caja
410 x 260 x 100 mm
Numero de detalles
241
RTD35663
11,99€WWII Series – 3D Resin Printed
High-detailed 3D Resin Printed Set.
Serie WWII – Resina impresa en 3D
Conjunto impreso en resina 3D de gran detalle.
TB 35082
27,00€2 figures.
Sculpted by Krisztian Bodi
Boxart painted by Juan Antonio Pérez Marchante
2 figuras.
Esculpido por Krisztian Bodi
Boxart pintado por Juan Antonio Pérez Marchante
RTD35662
11,99€WWII Series – 3D Resin Printed
High-detailed 3D Resin Printed Set.
Serie WWII – Resina impresa en 3D
Conjunto impreso en resina 3D de gran detalle.
ED7059
13,50€ProfiPACK edition kit of Soviet Cold War jet aircraft MiG-15bis in 1/72 scale.
Kit de edición ProfiPACK del avión de reacción MiG-15bis de la Guerra Fría soviética en escala 1/72.
RTD35665
17,99€WW II Series – 3D Resin Printed
High-detailed 3D Resin Printed Set
Serie WW II – Resina impresa en 3D
Conjunto impreso en resina 3D de alto nivel de detalle
FCM 36, French Light Tank in German Service 1/35
ICM 35337
36,95€After the defeat of France in the summer of 1940, a large number of French armored vehicles fell into the hands of the Wehrmacht. Many samples went to the winners in perfect condition. Later, the German army used them in various combat operations, and also used them as auxiliary and training equipment.
Among the captured samples were the FCM 36 tanks, which were previously part of two French tank battalions. Before the defeat of France, they managed to take part in several combat episodes in the spring and summer of 1940. The total number of these combat vehicles received by the Wehrmacht numbered about 50 copies. Later, many of them became the basis for the creation of self-propelled anti-tank guns and self-propelled howitzers.
Después de la derrota de Francia en el verano de 1940, una gran cantidad de vehículos blindados franceses cayó en manos de la Wehrmacht. Muchas muestras llegaron a los ganadores en perfectas condiciones. Posteriormente, el ejército alemán los utilizó en diversas operaciones de combate, y también los utilizó como equipo auxiliar y de entrenamiento.
Entre las muestras capturadas se encontraban los tanques FCM 36, que anteriormente formaban parte de dos batallones de tanques franceses. Antes de la derrota de Francia, lograron participar en varios episodios de combate en la primavera y el verano de 1940. El número total de estos vehículos de combate recibidos por la Wehrmacht ascendía a unas 50 copias. Más tarde, muchos de ellos se convirtieron en la base para la creación de cañones antitanques autopropulsados y obuses autopropulsados.
Escala
1:35
Periodo de tiempo
WW2
Marcas
Panzerkampfwagen 737 FCM (f), aproximadamente 1940
FCM 36, tanque 30061 del cuarto batallón de tanques francés. Capturado por las fuerzas alemanas en junio de 1940
FCM 36, tanque 30022 del 7 ° batallón de tanques francés. Capturado por las fuerzas alemanas en junio de 1940
Tamaño del modelo (largo x alto)
126 x 62 mm
Tamaño de caja
295 x 225 x 40 mm
Numero de detalles
158
1/700 IJN Battleship Yamato (1945 / Operation Ten-ichigo)
FUJ433233
42,50€
1/700 IJN Battleship Yamato (1945 / Operation Ten-ichigo)
RTD35660
9,99€WWII Series – 3D Resin Printed
High-detailed 3D Resin Printed Set.
Serie WWII – Resina impresa en 3D
Conjunto impreso en resina 3D de gran detalle.
Road Barriers (2×2 & 2×4) 1/35
RTD35639-K
11,50€High-detailed Diorama Set.
Includes detailed Ceramic
Conjunto de diorama muy detallado.
Incluye piezas de cerámica detalladas
US Navy Corpsmen & Signalman Utah beach, Normandy 1/35
TB 35179
50,00€2 figures.
Sculpted by Stefano D’Antonio ‘the Lebanese’
Boxart painted by Enrico Cigersa
3 figuras.
Esculpido por Stefano D’Antonio ‘el libanés’
Boxart pintado por Enrico Cigersa
MJEZ35020
16,95€SCALE : 1/35
3D PRINTED
EASY ASSEMBLING AND HIGH RESOLUTION.
ESCALA: 1/35
IMPRESO EN 3D
FÁCIL MONTAJE Y ALTA RESOLUCIÓN.
AH-1G Cobra (late production), US Attack Helicopter 1/32
ICM 32061
73,95€The AH-1G combat helicopter has conceived as a fire support helicopter. Due to its firepower, the term “aerial artillery” coined during the Vietnam War, was often applied to it. The main armament mounted on a turret in the nose part of the helicopter was a six-barreled Minigun 7.62 mm machine gun with a clip of 4,000 rounds and an M129 40 mm grenade launcher with 300 rounds of ammunition. Other types of weapons also were used.
In 1972, the Vietnamese began to use the Soviet “Strela” man-portable anti-aircraft system to attack low-flying targets. They were very successful against helicopters, including Cobras. Some helicopters were equipped with a device that diverted hot gases from the working engine upwards to protect them from the homing heads mounted on the Arrows. And as practice showed, this had the necessary effect. To capture helicopters modified in this way, the sensitivity of the Arrow’s homing head was insufficient.
During the war in Southeast Asia, the Cobras demonstrated excellent survivability and proved themselves to be a reliable and powerful ground support aircraft.
Scale
1:32
Time period
After 1950
Model size (length x width)
422 x 106 mm
Box size
410 x 260 x 100 mm
Number of details
241
El helicóptero de combate AH-1G se ha concebido como un helicóptero de apoyo contra incendios. Debido a su potencia de fuego, el término “artillería aérea”, acuñado durante la Guerra de Vietnam, se le aplicó a menudo. El armamento principal montado en una torreta en la parte delantera del helicóptero era una ametralladora Minigun de 7,62 mm de seis cañones con un cargador de 4.000 rondas y un lanzagranadas M129 de 40 mm con 300 rondas de munición. También se utilizaron otros tipos de armas.
En 1972, los vietnamitas comenzaron a utilizar el sistema antiaéreo portátil “Strela” soviético para atacar objetivos en vuelo bajo. Tuvieron mucho éxito contra helicópteros, incluidos Cobras. Algunos helicópteros estaban equipados con un dispositivo que desviaba los gases calientes del motor en funcionamiento hacia arriba para protegerlos de los cabezales de retorno montados en los Arrows. Y como demostró la práctica, esto tuvo el efecto necesario. Para capturar helicópteros modificados de esta manera, la sensibilidad de la cabeza de retorno del Arrow fue insuficiente.
Durante la guerra en el sudeste asiático, los Cobras demostraron una excelente capacidad de supervivencia y demostraron ser un avión de apoyo terrestre confiable y poderoso.
Escala
1:32
Periodo de tiempo
Después de 1950
Tamaño del modelo (largo x ancho)
422 x 106 mm
Tamaño de caja
410 x 260 x 100 mm
Numero de detalles
241
Cookie | Duration | Description |
---|---|---|
PHPSESSID | session | This cookie is native to PHP applications. The cookie is used to store and identify a users' unique session ID for the purpose of managing user session on the website. The cookie is a session cookies and is deleted when all the browser windows are closed. |
viewed_cookie_policy | 1 year | The cookie is set by the GDPR Cookie Consent plugin to store whether or not the user has consented to the use of cookies. It does not store any personal data. |
Cookie | Duration | Description |
---|---|---|
pelm_last_loaded_shop_type | 1 month | No description available. |
woocommerce_recently_viewed | session | Description unavailable. |
wp_woocommerce_session_9205d68996927145eedf8afcab99571e | 2 days | No description |
yith_wcwl_session_9205d68996927145eedf8afcab99571e | 1 month | No description |
Cookie | Duration | Description |
---|---|---|
_fbp | 3 months | This cookie is set by Facebook to display advertisements when either on Facebook or on a digital platform powered by Facebook advertising, after visiting the website. |
fr | 3 months | Facebook sets this cookie to show relevant advertisements to users by tracking user behaviour across the web, on sites that have Facebook pixel or Facebook social plugin. |
loc | 1 year 1 month | AddThis sets this geolocation cookie to help understand the location of users who share the information. |
VISITOR_INFO1_LIVE | 5 months 27 days | A cookie set by YouTube to measure bandwidth that determines whether the user gets the new or old player interface. |
YSC | session | YSC cookie is set by Youtube and is used to track the views of embedded videos on Youtube pages. |
yt-remote-connected-devices | never | YouTube sets this cookie to store the video preferences of the user using embedded YouTube video. |
yt-remote-device-id | never | YouTube sets this cookie to store the video preferences of the user using embedded YouTube video. |
yt.innertube::nextId | never | This cookie, set by YouTube, registers a unique ID to store data on what videos from YouTube the user has seen. |
yt.innertube::requests | never | This cookie, set by YouTube, registers a unique ID to store data on what videos from YouTube the user has seen. |
Cookie | Duration | Description |
---|---|---|
_ga | 2 years | The _ga cookie, installed by Google Analytics, calculates visitor, session and campaign data and also keeps track of site usage for the site's analytics report. The cookie stores information anonymously and assigns a randomly generated number to recognize unique visitors. |
_ga_BK3V7Y3VZB | 2 years | This cookie is installed by Google Analytics. |
_gat_gtag_UA_105576964_1 | 1 minute | Set by Google to distinguish users. |
_gid | 1 day | Installed by Google Analytics, _gid cookie stores information on how visitors use a website, while also creating an analytics report of the website's performance. Some of the data that are collected include the number of visitors, their source, and the pages they visit anonymously. |
at-rand | never | AddThis sets this cookie to track page visits, sources of traffic and share counts. |
CONSENT | 2 years | YouTube sets this cookie via embedded youtube-videos and registers anonymous statistical data. |
uvc | 1 year 1 month | Set by addthis.com to determine the usage of addthis.com service. |
Cookie | Duration | Description |
---|---|---|
pll_language | 1 year | The pll _language cookie is used by Polylang to remember the language selected by the user when returning to the website, and also to get the language information when not available in another way. |