Weight | 0.08 kg |
---|---|
Dimensions | 7 × 3 × 7 cm |
Materials | Adhesive |
Pack | Single |
Product | |
Theme | AFV, Aircraft, Civil, Diorama, Military, Naval, Sci-fi, Train, Wargame |
Volumen | 75ml |
P.P.P | Yes |
AK Points
Availability: In stock
5,75€
This liquid solution has been designed to be used if you require a more permanent fixing for your pigments.
Esta solución líquida ha sido diseñada para usarse si necesita una fijación más permanente para sus pigmentos.
Weight | 0.08 kg |
---|---|
Dimensions | 7 × 3 × 7 cm |
Materials | Adhesive |
Pack | Single |
Product | |
Theme | AFV, Aircraft, Civil, Diorama, Military, Naval, Sci-fi, Train, Wargame |
Volumen | 75ml |
P.P.P | Yes |
TOP LINE DELUXE Marta Kolinsky KIT
ABT850
71,95€SURVIVAL WEATHERING BRUSHES SET
AK663
12,20€An arsenal of brushes designed by the weathering experts here at AK. Top quality weathering products require the right tools to be applied; our Survival Weathering Brush set is the right set of tools you need. Contained in this set are the brushes needed to streak, chip, wash, and apply pigments plus much more.
Includes:
Un arsenal de pinceles diseñados por los expertos en weathering de AK. Los productos de weathering de alta calidad requieren la aplicación de las mismas con las herramientas adecuadas; nuestro juego de pinceles de supervivencia es el conjunto de herramientas adecuado que necesitas. En este juego se encuentran los pinceles necesarios para rayar, astillar, lavar y aplicar pigmentos y mucho más.
Incluye:
MAGNET ULTRA RESISTANT CYANOCRYLATE GLUE
AK12015
7,60€20g.
General-purpose cyanoacrylate 401. Fast drying, extra strong, low viscosity, specially formulated for adhesion between materials that can even have an acidic surface. Can be used with rubber, leather, wood, metal, resin and plastic. The surfaces to be joined must be free of dirt, dust and grease. A small amount of adhesive should be applied; more cyanoacrylate does not guarantee a better bond and makes more difficult the drying of the adhesive that is effective for bonding.
– 99% Cyano.
– Ethyl cyanoacrylate
– Use temperature: -55º to 120º
– Set time: between 3 and 10 seconds. The gaps and uneven surfaces can increase this setting time. It is not necessary to use clamps. Holding the pieces firmly for 10-30 seconds will ensure better adhesion.
– Definitive cure time: 24 h
– Viscosity: 110 mPa.S
– Shear strength: 21.0 MPa
* Bottles are not filled at a 100% to leave some air and make it work properly.
20g.
Cianoacrilato de uso general 401, secado rápido, extra fuerte, baja viscosidad especialmente formulado para la adhesión entre materiales que incluso pueden tener una superficie ácida. Se puede usar con caucho, cuero, madera, metal, resina y plástico. Las superficies a unir deben estar libres de suciedad, polvo y grasa. Se debe aplicar una pequeña cantidad de adhesivo; más cianoacrilato no garantiza una mejor unión y hace más difícil el secado del adhesivo que es efectivo para la unión.
– 99% Cyano
– Cianoacrilato de etilo
– Temperatura de uso: -55º a 120º
– Tiempo de fraguado: entre 3 y 10 segundos. Los huecos y las superficies irregulares pueden aumentar este tiempo de fraguado. No es necesario usar abrazaderas. Sostener las piezas firmemente durante 10-30 segundos asegurará una mejor adhesión.
– Tiempo de curado definitivo: 24 h.
– Viscosidad: 110 mPa.S
– Resistencia al corte: 21.0 MPa
*Las botellas no se llenan al 100% para dejar algo de aire y que funcione correctamente.
AK12004
4,95€40 ml.
Special square anti rolling base.
Ultra-thin precision maxoma fiber brush.
1. Special density.
2. Glue by capillary action, quick drying.
The Extra Thin Citrus Cement glues by capillary action with a medium / fast drying time, and has a mild citrus aroma. It is undoubtedly the best option for general assembly work. Great performance with the perfect viscosity for plastic modeling.
*Same characteristics as our AK12002 Extra Thin Cement but with an aromatic touch.
40 ml.
Base especial antivuelco cuadrada.
Pincel de fibra maxoma de precisión ultrafina.
1. Densidad especial.
2. Pegamento por capilaridad, uniones muy rápidas.
El Extra Fino Cítrico tiene las características del pegamento extra fino pero con un aroma cítrico suave. Para pegar por capilaridad con un tiempo de secado medio / rápido, es sin duda la mejor opción para el trabajo de montaje general. Gran rendimiento con la viscosidad perfecta para modelar plástico.
*Las mismas características que nuestro AK12002 Extra Thin Cement pero con un toque aromático.
ABT114
6,50€For precision works is necessary to keep the tip of your brushes in a perfect state. This gel is indicated to keep the tip sharp and in perfect use condition with all brushes fibers compacted and never open or deformed. With this gel you will keep your brushes always like new ones after using and cleaning them (it can be used after the application of our ABT117 Magic Potion for Brushes or any other chemical or natural cleaner).
AK050
5,90€Our odorless turpentine is very different from our white spirit. Besides being odorless, this product is softer and less aggressive than our White Spirit. This property of the odorless thinner (Turpentine) makes it great for delicate, soft and subtle blending. This thinner is exclusive to enamel and oil paint. This larger bottle gives you more thinner and costs less when compared to buying three 35ml bottles.
AK11505
7,95€
AK8064
12,75€The Wet Palette is a tool mainly used by figure painters, but more and more it is being used by people that paint with acrylics. It will extend the useful life of any acrylic so that it can be used for hours and once shut it will preserve the colors and color mixtures. It can be kept in the fridge.
It has three components:
1.Sponge, to hold large quantities of water, since it is quite thick.
2.Cloth made of fiber, placed on top of the sponge as a leveler, humidity filter, and as an interchangeable element in case of stains or if not used for a long time.
3.High quality special Paper, made of a fine silicone film, allows the transfer of humidity but prevents water forming and paints from dissolving, and does not give off any fibers not hairs when worked with the brushes.
The Wet Palette is watertight and airtight, made of the same material of marine containers for flares, charts, and medicines. Its locks guarantee the seal. This extends the life of paints, especially in Summer, hot climates, and under extreme conditions.
*Dimensions: 16 x 13 x 4 cm.
It contains:
?· Need more info? Click here
FA 614
18,95€A set designed for thorough cleaning of any airbrush.
A glass jar with a plastic screw cap is used to purge the airbrush with the cleaner after each use. Thanks to a special filter in the upper part, all impurities and liquid remain in the container. Additionally, the lid is equipped with an airbrush stand.
Cleaners and rods are used to thoroughly clean various elements of airbrushes: tips, nozzles, bodies and other elements. The needle, on the other hand, cleans the inside of the airbrush nozzle or other internal parts of the airbrush, such as the needle guide channel.
Container Height: 85mm, diameter: 100mm.
Un conjunto diseñado para la limpieza a fondo de cualquier aerógrafo.
Se usa un frasco de vidrio con un tapón de rosca de plástico para purgar el aerógrafo con el limpiador después de cada uso. Gracias a un filtro especial en la parte superior, todas las impurezas y líquidos permanecen en el recipiente. Además, la tapa está equipada con un soporte para aerógrafo.
Los limpiadores y las varillas se utilizan para limpiar a fondo varios elementos de los aerógrafos: puntas, boquillas, cuerpos y otros elementos. La aguja, por otro lado, limpia el interior de la boquilla del aerógrafo u otras partes internas del aerógrafo, como el canal de guía de la aguja.
Altura del contenedor: 85 mm, diámetro: 100 mm.
AK183
5,25€A high quality ultra matte varnish which can be applied with a brush or an airbrush to achieve a dead flat finish on any surface.
Acrylic Ultra Matte Varnish formulated for maximum airbrush performance. Water soluble, odorless, and non-toxic. Shake before each use. We recommend AK-712 Acrylic Thinner for thinning. Dries completely in 12 hours.
60 ml.
Barniz ultra mate de alta calidad que puede ser aplicado con pincel o con aerógrafo para lograr un acabado plano en cualquier superficie.
Barniz ultra mate acrílico formulado para el máximo rendimiento del aerógrafo. Soluble en agua, inodoro y no tóxico. Agitar antes de cada uso. Recomendamos AK-712 Acrylic Thinner para diluir. Se seca completamente en 12 horas.
60 ml.
TOP LINE DELUXE Marta Kolinsky KIT
ABT850
71,95€SURVIVAL WEATHERING BRUSHES SET
AK663
12,20€An arsenal of brushes designed by the weathering experts here at AK. Top quality weathering products require the right tools to be applied; our Survival Weathering Brush set is the right set of tools you need. Contained in this set are the brushes needed to streak, chip, wash, and apply pigments plus much more.
Includes:
Un arsenal de pinceles diseñados por los expertos en weathering de AK. Los productos de weathering de alta calidad requieren la aplicación de las mismas con las herramientas adecuadas; nuestro juego de pinceles de supervivencia es el conjunto de herramientas adecuado que necesitas. En este juego se encuentran los pinceles necesarios para rayar, astillar, lavar y aplicar pigmentos y mucho más.
Incluye:
MAGNET ULTRA RESISTANT CYANOCRYLATE GLUE
AK12015
7,60€20g.
General-purpose cyanoacrylate 401. Fast drying, extra strong, low viscosity, specially formulated for adhesion between materials that can even have an acidic surface. Can be used with rubber, leather, wood, metal, resin and plastic. The surfaces to be joined must be free of dirt, dust and grease. A small amount of adhesive should be applied; more cyanoacrylate does not guarantee a better bond and makes more difficult the drying of the adhesive that is effective for bonding.
– 99% Cyano.
– Ethyl cyanoacrylate
– Use temperature: -55º to 120º
– Set time: between 3 and 10 seconds. The gaps and uneven surfaces can increase this setting time. It is not necessary to use clamps. Holding the pieces firmly for 10-30 seconds will ensure better adhesion.
– Definitive cure time: 24 h
– Viscosity: 110 mPa.S
– Shear strength: 21.0 MPa
* Bottles are not filled at a 100% to leave some air and make it work properly.
20g.
Cianoacrilato de uso general 401, secado rápido, extra fuerte, baja viscosidad especialmente formulado para la adhesión entre materiales que incluso pueden tener una superficie ácida. Se puede usar con caucho, cuero, madera, metal, resina y plástico. Las superficies a unir deben estar libres de suciedad, polvo y grasa. Se debe aplicar una pequeña cantidad de adhesivo; más cianoacrilato no garantiza una mejor unión y hace más difícil el secado del adhesivo que es efectivo para la unión.
– 99% Cyano
– Cianoacrilato de etilo
– Temperatura de uso: -55º a 120º
– Tiempo de fraguado: entre 3 y 10 segundos. Los huecos y las superficies irregulares pueden aumentar este tiempo de fraguado. No es necesario usar abrazaderas. Sostener las piezas firmemente durante 10-30 segundos asegurará una mejor adhesión.
– Tiempo de curado definitivo: 24 h.
– Viscosidad: 110 mPa.S
– Resistencia al corte: 21.0 MPa
*Las botellas no se llenan al 100% para dejar algo de aire y que funcione correctamente.
AK12004
4,95€40 ml.
Special square anti rolling base.
Ultra-thin precision maxoma fiber brush.
1. Special density.
2. Glue by capillary action, quick drying.
The Extra Thin Citrus Cement glues by capillary action with a medium / fast drying time, and has a mild citrus aroma. It is undoubtedly the best option for general assembly work. Great performance with the perfect viscosity for plastic modeling.
*Same characteristics as our AK12002 Extra Thin Cement but with an aromatic touch.
40 ml.
Base especial antivuelco cuadrada.
Pincel de fibra maxoma de precisión ultrafina.
1. Densidad especial.
2. Pegamento por capilaridad, uniones muy rápidas.
El Extra Fino Cítrico tiene las características del pegamento extra fino pero con un aroma cítrico suave. Para pegar por capilaridad con un tiempo de secado medio / rápido, es sin duda la mejor opción para el trabajo de montaje general. Gran rendimiento con la viscosidad perfecta para modelar plástico.
*Las mismas características que nuestro AK12002 Extra Thin Cement pero con un toque aromático.
ABT114
6,50€For precision works is necessary to keep the tip of your brushes in a perfect state. This gel is indicated to keep the tip sharp and in perfect use condition with all brushes fibers compacted and never open or deformed. With this gel you will keep your brushes always like new ones after using and cleaning them (it can be used after the application of our ABT117 Magic Potion for Brushes or any other chemical or natural cleaner).
AK050
5,90€Our odorless turpentine is very different from our white spirit. Besides being odorless, this product is softer and less aggressive than our White Spirit. This property of the odorless thinner (Turpentine) makes it great for delicate, soft and subtle blending. This thinner is exclusive to enamel and oil paint. This larger bottle gives you more thinner and costs less when compared to buying three 35ml bottles.
ABT115
6,50€Liquid mask is quite popular among modelers for protecting parts that don’t need to be painted. Our liquid mask has a characteristic blue tone and sweet smell of vanilla, is not aggressive and will not cause damage even on clear plastic parts. It dries quickly leaving the masked surface free of paint, and finally it can be removed as a thin elastic film.
IMPORTANT: CLOSE THE BOTTLE ONCE USED FOR PRESERVATION
AK617
5,60€A must have product for any modeler who wants to add volume to their mud and soil mixtures whether is for a diorama or to be splashed on to their vehicle. Mix the plaster in with any of our high quality Nature Effects line of different types of mud, earth, dust and soil. The combinations are endless. If your mixture is too thick you can dilute it with white spirit. If is too thin, add more plaster. Either paint your mixture on to your diorama or load a paint brush with your mixture and using your airbrush, blow short bursts of air at the brush to recreate splatters.
AK893
6,95€Special Product.
High quality product developed to enhance, repair, and achieve extremely realistic transparent glass-like finishes on clear plastic parts. Simply dip and let dry for a few minutes. The bottle is thick to dip parts without problem. Clean excess around the edges to achieve a uniform layer. For best results, allow product to dry in a dust-free environment. This product, when applied to clear plastic, will result in a realistic glass-like appearance on parts like clear plastic cockpit canopies or other clear parts.
Producto Especial.
Producto de alta calidad desarrollado para mejorar, reparar y lograr acabados transparentes extremadamente realistas en forma de vidrio en piezas de plástico transparente. Simplemente sumerja y deje secar durante unos minutos. La botella es gruesa para sumergir las piezas sin problema. Limpie el exceso alrededor de los bordes para lograr una capa uniforme. Para mejores resultados, permita que el producto se seque en un ambiente libre de polvo. Este producto, cuando se aplica a plástico transparente, dará como resultado una apariencia realista de vidrio en partes como cubiertas de cabina de plástico transparente u otras partes transparentes.
AK119
5,25€
AK192
5,25€A high quality glossy varnish which can be applied with a brush or an airbrush to achieve a dead flat finish on any surface.
Acrylic Glossy Varnish formulated for maximum airbrush performance. Water soluble, odorless, and non-toxic. Shake before each use. We recommend AK-712 Acrylic Thinner for thinning. Dries completely in 12 hours.
60 ml.
Barniz brillante de alta calidad que puede ser aplicado con pincel o con aerógrafo para lograr un acabado plano en cualquier superficie.
Barniz brillante acrílico formulado para el máximo rendimiento del aerógrafo. Soluble en agua, inodoro y no tóxico. Agitar antes de cada uso. Recomendamos AK-712 Acrylic Thinner para diluir. Se seca completamente en 12 horas.
60 ml.
AK897
7,90€New product to create texture of cast in any plastic, resin or metal part of your model. It can be used for military, Scify, Gundam or any model branch to create a cast effect only with this acrylic paste. Just extend, work and let dry. Your models will have a complete different appearance.
130g.
Nuevo producto para crear textura de fundición en cualquier parte de plástico, resina o metal de su modelo. Se puede usar para militares, Scifi, Gundam o cualquier tipo de modelo para crear un efecto de fundición solo con esta pasta acrílica. Simplemente extienda, trabaje y deje secar. Sus modelos tendrán una apariencia completamente diferente.
130g.
AK11505
7,95€
AK049
3,60€Our odorless turpentine is very different from our white spirit. Besides being odorless, this product is softer and less aggressive than our White Spirit. This property of the odorless thinner (Turpentine) makes it great for delicate, soft and subtle blending. This thinner is exclusive to use with enamel and oil paint.
AK118
5,90€Adhesive to fix down all kinds of earth, gravel, small stones, sand, etc to your bases. This special adhesive, with an alcohol base, is much more effective than the traditional white glue. The white glue tends to leave a plastic finish over the surface giving an unreal aspect and also tends not to expand well through the material. But this new adhesive expands rapidly and is adsorbed by the stones and sand saving a lot of time when fixing down rubble for example. This product is easily cleaned using alcohol, can be applied using an airbrush or paint brush and the drying process can be accelerated with a hairdryer or any other type of heat source. Although it’s matt when it dries, on smooth surfaces it can leave a light satin mark, however, this can be removed with a matt varnish.
Original product of AK-interactive, don’t choose copies.
ABT114
6,50€For precision works is necessary to keep the tip of your brushes in a perfect state. This gel is indicated to keep the tip sharp and in perfect use condition with all brushes fibers compacted and never open or deformed. With this gel you will keep your brushes always like new ones after using and cleaning them (it can be used after the application of our ABT117 Magic Potion for Brushes or any other chemical or natural cleaner).
AK665
5,95€Special Product.
100ml bottle. High quality acrylic resin to mix with pigments to fix textures and with a matte finish. TEXTURIZER can be used to make terrains and lower parts of vehicles.
Producto Especial.
Botella de 100 ml. Resina acrílica de alta calidad para mezclar con pigmentos para fijar texturas y con un acabado mate. TEXTURIZER puede usarse para hacer terrenos y partes inferiores de vehículos.
ABT116
6,75€Surfactants-active nonionic gel, especially designed for the care of hands and utensils after using oil paints. You don´t need to use water, just apply and rub and dry it with a suitable cloth piece.Suitable only for the most elite modelers.
ABT115
6,50€Liquid mask is quite popular among modelers for protecting parts that don’t need to be painted. Our liquid mask has a characteristic blue tone and sweet smell of vanilla, is not aggressive and will not cause damage even on clear plastic parts. It dries quickly leaving the masked surface free of paint, and finally it can be removed as a thin elastic film.
IMPORTANT: CLOSE THE BOTTLE ONCE USED FOR PRESERVATION
AK617
5,60€A must have product for any modeler who wants to add volume to their mud and soil mixtures whether is for a diorama or to be splashed on to their vehicle. Mix the plaster in with any of our high quality Nature Effects line of different types of mud, earth, dust and soil. The combinations are endless. If your mixture is too thick you can dilute it with white spirit. If is too thin, add more plaster. Either paint your mixture on to your diorama or load a paint brush with your mixture and using your airbrush, blow short bursts of air at the brush to recreate splatters.
AK893
6,95€Special Product.
High quality product developed to enhance, repair, and achieve extremely realistic transparent glass-like finishes on clear plastic parts. Simply dip and let dry for a few minutes. The bottle is thick to dip parts without problem. Clean excess around the edges to achieve a uniform layer. For best results, allow product to dry in a dust-free environment. This product, when applied to clear plastic, will result in a realistic glass-like appearance on parts like clear plastic cockpit canopies or other clear parts.
Producto Especial.
Producto de alta calidad desarrollado para mejorar, reparar y lograr acabados transparentes extremadamente realistas en forma de vidrio en piezas de plástico transparente. Simplemente sumerja y deje secar durante unos minutos. La botella es gruesa para sumergir las piezas sin problema. Limpie el exceso alrededor de los bordes para lograr una capa uniforme. Para mejores resultados, permita que el producto se seque en un ambiente libre de polvo. Este producto, cuando se aplica a plástico transparente, dará como resultado una apariencia realista de vidrio en partes como cubiertas de cabina de plástico transparente u otras partes transparentes.
AK119
5,25€
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.