MAPLE RED 1:35

Splatter Accumulated Dust with texture, it has been formulated for creating splatter effects and textures on vehicles, dioramas and vignettes. Accumulated Dust is just the right consistency to apply in the lower parts; easily handled by brush, creating realistic textures of accumulated dust. Ideal the final touches of variable textured ground to your model or terrain. Can be splashed using a brush and directing the flow of air of your airbrush
It can be diluted with water or an acrylic thinner to improve its flow. No toxic

Dark and Dry Crackle Effects has been formulated for creating dark and crackled soil on the lower surfaces of vehicles, dioramas, and vignettes. This product has been composed for the creation of perfect scale correct crackle effects every time. Over an acrylic base, use a thin layer and let dry. No toxic

Scale asphalt texture with a black/grey shade similar to that of roads, highways or any asphalt covered surface. This is a high quality acrylic product developed for extreme realism.
Acrylic product for textures in dioramas. Perfect results in thin or thick layers. It can be diluted with water or an acrylic thinner to improve its flow.
You can work with pigments once dry to achieve tonal variation. No toxic

Powder snow texture to for use over terrain or vehicle surfaces to achieve thawing snow or the first phases of a snowfall. It can be fixed with white glue, with varnish or with gravel & sand and in combination with wet effects to achieve perfect results.
It can also be mixed with AK Puddles to get different kinds of dirty snow. No toxic

Splatter Wet Ground has been formulated for creating wet ground splattering and accumulation on vehicles, diorama’s, and vignettes. Wet Ground is just the right consistency; easily handled by brush, creating realistic textures of accumulated wet ground and dirt on lower vehicle surfaces has never been easier. Ideal the final touches of variable textured ground to your model or terrain. Can be splashed using a brush and directing the flow of air of your airbrush
It can be diluted with water or an acrylic thinner to improve its flow. No toxic

Wet Ground texture is the perfect texture and color for recreating any wet soil or dirt natural surface. Allow 24 hours to completely dry; prior to drying, wheel, track marks, or whatever you wish can be pressed into the surface.
Acrylic product for textures in dioramas. Perfect results in thin or thick layers. It can be diluted with water or an acrylic thinner to improve its flow. No toxic

A low odor, 2 part component epoxy resin that simulates crystal clear water for miniature, dioramas, vignettes, etc and other hobbies. It includes 2 syringes and instructions in the box. It does not shrink and nor leaves bubbles. High quality product completely transparent that can be thinned if desired. Mix resin and hardening agent in 2:1 ratio an let dry for 24 hours. Instructions and guide in the box

Corrosion texture is an acrylic product that has been formulated for creating surface textures such as corrosion on vehicles, or any element of your dioramas, and vignettes. The composition of this product allows extremely realistic, scale correct textures every time. Corrosion texture is best applied in a thin layer; once dry incorporate pigments for more chromatic tones. No toxic

Brown-Green dense gel for swamp waters. To create a sense of depth, apply the gel over a painted surface. Drying time is dependent on the amount used; however, 24 hours is what we recommend. This is a high quality acrylic product developed for extreme realism. Acrylic product for textures in dioramas. Perfect results in layers from 0.1 to 3 cm. It can be diluted with water or an acrylic thinner to improve its flow. No toxic

Neutral Earth texture allows the modeler to create their own earth tones; it is a neutral white that can be colored with acrylics for use on diorama or vignette bases allowing for a wider range of tones. This is a high quality acrylic product developed for extreme realism. Stir well, slowly adding in small amounts of your color until the desired tone is achieved.
Perfect results are obtained by working in thin or thick layers. If desired this gel can be diluted with water or an acrylic thinner resulting in improved flow over the surface. No toxic

Light and Dry Crackle Effects has been formulated for creating dry and crackled soil on the lower surfaces of vehicles, diorama’s, and vignettes. This product has been composed for the creation of perfect scale correct crackle effects every time. Over an acrylic base, use a thin layer and let dry. No toxic

Puddles is a slightly tinted especially liquid crystalline product designed to replicate small puddles and standing dirty water on your dioramas and vignettes. Puddles is self-leveling and capable of flowing over uneven surfaces; apply thin layers, no more than 3 mm at a time. If depth is desired, build up thin layers. Its composition allows easy handling with a brush achieving a very realistic texture. High quality acrylic product. Non toxic