FS 36251 Agressor Grey 17ml

This colour is a patina to be applied over the initial colour and then removed leaving a subtle layer over the paint. This oxide colour has been designed help weathering rusted structures of your models.

Suitable to mix with all the base colours and create dirt and dust effects. Thanks to its light tone you will achieve shadow areas on white or light gray parts. Very useful to illuminate certain parts on brown, sand or tri-tone camouflages vehicles.

Enamel type wash for modelling.
Wash dark brown indicate for green colored vehicles.
The basic technique used to weather any type of model is the wash, a classic technique that is still one of the most used techniques in modelling today. Apply the washes after shaking the bottle with a large brush to pick out details and creating shadows. The excess of the wash can be easily removed with a clean brush and White Spirit or odorless.

High quality paint for Brushes and Airbrush. 17ml bottle.
The Air series paint is designed to be effective for airbrush and brush, and is water- soluble, avoiding strong smells and harmful solvents. Formula ultra-resistant and satin. Nontoxic. It can be easily thinned with our specific acrylic thinner or water if necessary. We recommend AK-712 Acrylic Thinner for thinning. There’s no need to dilute the paints when you decide to use your airbrush. When applied by brush they also have a greater degree of coverage. Use alone or mix with other acrylic paints to obtain a different color. Shake before each use. Dries completely in 24 hours.

High quality paint for Brushes and Airbrush. 17ml bottle.
The paint is designed to be effective for airbrush and brush, and is water- soluble, avoiding strong smells and harmful solvents. Non toxic. It can be easily thinned with our specific acrylic thinner or water if necessary. We recommend AK-712 Acrylic Thinner for thinning. There’s no need to dilute the paints when you decide to use your airbrush. When applied by brush they also have a greater degree of coverage. Use alone or mix with other acrylic paints to obtain a different color. Shake before each use. Dries completely in 24 hours.

A basic in weathering processes, adding realism to the underside of dirty vehicles when used on a subtle way. A special colour to create mud accumulation effects. It can be mixed with plaster and other colours like ABT130 Dark Mud to achieve a wide tone variety, or worked with varnishes in order to achieve humid or dry effect. Lighter mud colours are usually used over the darker tones on splashes or side areas of the splattered parts in order to simulate dry mud.

Blue tones are indicated to obtain good results in the weathering processes on models with a gray or black base. It can be used on sci-fi subjects, ships or dioramas. Blue and cold tones in general will help us to obtain shadows on green tones on vehicles using the dotting technique. Also suitable to work details on uniforms or figures with blue clothes.

Special tone to make effects over green colors to make deep and contrast. Indicated also for mix on any green or blue colors for chromatic variation

High quality paint for Brushes and Airbrush. 17ml bottle.
The Air series paint is designed to be effective for airbrush and brush, and is water- soluble, avoiding strong smells and harmful solvents. Formula ultra-resistant and satin. Nontoxic. It can be easily thinned with our specific acrylic thinner or water if necessary. We recommend AK-712 Acrylic Thinner for thinning. There’s no need to dilute the paints when you decide to use your airbrush. When applied by brush they also have a greater degree of coverage. Use alone or mix with other acrylic paints to obtain a different color. Shake before each use. Dries completely in 24 hours.

This colour can be used in a wide variety of situations and it is ideal for vehicles that need red priming, ship hulls, sci-fi models, for combining on figure clothing, red parts or layers, for the dotting and mapping techniques, etc.