Weight | 0.4 kg |
---|---|
Dimensions | 27 × 13 × 6 cm |
Army | German |
Availability: Only 2 left in stock
23,95€
Fw 190D was the final mass-produced version of the ‘golden child’ of Focke-Wulf company, that lived to see many variants differing in armament and engines used.
Although the version of Fw 190 equipped with an inline engine is often considered to be a late-war design, its history in fact dates back to earlier years and follows a natural direction of the machine’s development. As early as 1941 it was obvious that German fighters would have to contend with Allied bombers equipped with turbocharged engines capable of sustaining high power at altitudes exceeding 6000m. Focke-Wulf realized that the Allies were rapidly gaining the technical advantage and began courting the Air Ministry for a contract to develop versions that would sustain their combat characteristics at higher altitudes. Work soon began on developing fighters equipped with turbocharger. Initial trials with a radial engine (Fw 190B) were not promising and the attention of designers focused on inline engines (Fw 190C with DB603 engine). Despite extensive development programs, both versions were plagued by technical problems resulting from severely underdeveloped systems. Eventually they did not meet with the RLM enthusiasm, remaining only in prototype stages. In the end, advances in the development of the Junkers Jumo 213 engine gave hopes for a fighter that could at last match the more advanced designs of the enemy.
First prototype with the new engine was built in September 1942. It was a simple adaptation of the radial-engined machine – a complete inverted-V inline powerplant was fitted to the existing airframe. Flight tests showed that the new engine shifted the center of gravity too much forward, causing the aircraft to be unstable in flight. Focke-Wulf design team solved the problem paying attention to minimizing the changes required to the airframe. To compensate for the shifted center of gravity, the tail was lengthened by inserting a new section in the fuselage just in front of the tailplane. Increased engine power also required corrections to the longitudinal stability of the machine. It was achieved by inserting simple elements increasing area of the vertical stabilizer. Further tests of prototypes in the new configuration took two more years, and after dealing with teething problems and rejecting the unsatisfactory D-0, D-1 and D-2 configurations, the fighter equipped with the series-produced Jumo 213A engine with a single-stage, two-speed mechanical supercharger was put into series production in August 1944 as the D-9 version. Thus the legend was born.
Near the end of war, the evolution of inline engines powering the Fw 190D accelerated and their intensive development resulted in successive subtypes of the aircraft. Variants D-10, D-12 and D-14 remained prototypes, but for D-11 and D-13 series production was started. They were equipped with a more powerful version of the Jumo 213F engine with a two-stage three-speed mechanical supercharger. The last variant to be developed was D-15, powered by the finally refined DB603 engine. A prototype version of the D-15 was built and flown just before the end of war, using a standard, series machine as a basis for conversion. The end of war ended the preparation of the new variant still at the stage of development, and the production was not started.
It is estimated that 1500 to 1700 machines of the D version were produced in all factories and production branches. Out of that about 900 were taken over by the Luftwaffe, but because of the chaotic situation in the last months of war still fewer of them were actually delivered to the combat units.
For more information on the differences between variants of the aircraft go to:
www.ibgmodels.com/resources-2
El Fw 190D fue la última versión producida en serie del “niño de oro” de la compañía Focke-Wulf, que vivió para ver muchas variantes que difieren en el armamento y los motores utilizados.
Aunque la versión del Fw 190 equipada con un motor en línea se considera a menudo un diseño de finales de la guerra, su historia se remonta en realidad a años anteriores y sigue una dirección natural de desarrollo de la máquina. Ya en 1941 era evidente que los cazas alemanes tendrían que enfrentarse a los bombarderos aliados equipados con motores turboalimentados capaces de mantener una gran potencia a altitudes superiores a los 6.000 metros. Focke-Wulf se dio cuenta de que los aliados estaban ganando rápidamente la ventaja técnica y comenzó a cortejar al Ministerio del Aire para que le concediera un contrato para desarrollar versiones que mantuvieran sus características de combate a mayores altitudes. Pronto se empezó a trabajar en el desarrollo de cazas equipados con turbocompresor. Los primeros ensayos con un motor radial (Fw 190B) no fueron prometedores y la atención de los diseñadores se centró en los motores en línea (Fw 190C con motor DB603). A pesar de los extensos programas de desarrollo, ambas versiones estaban plagadas de problemas técnicos derivados de sistemas muy poco desarrollados. Finalmente, no alcanzaron el entusiasmo del RLM, quedándose sólo en fases de prototipo. Al final, los avances en el desarrollo del motor Junkers Jumo 213 permitieron albergar esperanzas de un caza que pudiera por fin equipararse a los diseños más avanzados del enemigo.
El primer prototipo con el nuevo motor se construyó en septiembre de 1942. Se trataba de una simple adaptación de la máquina con motor radial: se instaló una planta motriz completa en V invertida en el fuselaje existente. Las pruebas de vuelo demostraron que el nuevo motor desplazaba el centro de gravedad demasiado hacia delante, lo que provocaba que el avión fuera inestable en vuelo. El equipo de diseño de Focke-Wulf resolvió el problema prestando atención a minimizar los cambios necesarios en el fuselaje. Para compensar el desplazamiento del centro de gravedad, se alargó la cola insertando una nueva sección en el fuselaje justo delante del plano de cola. El aumento de la potencia del motor también requirió correcciones en la estabilidad longitudinal de la máquina. Se consiguió insertando elementos sencillos que aumentaban la superficie del estabilizador vertical. Las pruebas de los prototipos con la nueva configuración duraron dos años más y, tras solucionar los problemas iniciales y rechazar las insatisfactorias configuraciones D-0, D-1 y D-2, el caza equipado con el motor Jumo 213A de serie con un sobrealimentador mecánico de una etapa y dos velocidades se puso en producción en serie en agosto de 1944 como la versión D-9. Así nació la leyenda.
Cerca del final de la guerra, la evolución de los motores en línea que propulsaban el Fw 190D se aceleró y su intenso desarrollo dio lugar a sucesivos subtipos del avión. Las variantes D-10, D-12 y D-14 siguieron siendo prototipos, pero para el D-11 y el D-13 se inició la producción en serie. Estaban equipadas con una versión más potente del motor Jumo 213F con un sobrealimentador mecánico de dos etapas y tres velocidades. La última variante que se desarrolló fue la D-15, impulsada por el motor DB603, finalmente perfeccionado. Se construyó y voló una versión prototipo del D-15 justo antes del final de la guerra, utilizando una máquina estándar de serie como base para la conversión. El final de la guerra puso fin a la preparación de la nueva variante aún en fase de desarrollo, y la producción no se inició.
Se estima que se produjeron entre 1500 y 1700 máquinas de la versión D en todas las fábricas y ramas de producción. De ellos, unos 900 fueron adquiridos por la Luftwaffe, pero debido a la caótica situación de los últimos meses de la guerra, todavía fueron menos los que se entregaron a las unidades de combate.
Para más información sobre las diferencias entre las variantes del avión, visite
www.ibgmodels.com/resources-2
Weight | 0.4 kg |
---|---|
Dimensions | 27 × 13 × 6 cm |
Army | German |
AK183
5,60€The original one.
A high quality ultra matte varnish which can be applied with a brush or an airbrush to achieve a dead flat finish on any surface.
Acrylic Ultra Matte Varnish formulated for maximum airbrush performance. Water soluble, odorless, and non-toxic. Shake before each use. We recommend AK-712 Acrylic Thinner for thinning. Dries completely in 12 hours.
60 ml.
El Original.
Barniz ultra mate de alta calidad que puede ser aplicado con pincel o con aerógrafo para lograr un acabado mate en cualquier superficie.
Nuestro barniz ultra mate acrílico está formulado para el máximo rendimiento del aerógrafo. Soluble en agua, inodoro y no tóxico. Agitar antes de cada uso. Recomendamos AK-712 Acrylic Thinner para diluir. Se seca completamente en 12 horas.
60 ml.
MAGNET ULTRA RESISTANT CYANOCRYLATE GLUE
AK12015
7,60€20g.
General-purpose cyanoacrylate 401. Fast drying, extra strong, low viscosity, specially formulated for adhesion between materials that can even have an acidic surface. Can be used with rubber, leather, wood, metal, resin and plastic. The surfaces to be joined must be free of dirt, dust and grease. A small amount of adhesive should be applied; more cyanoacrylate does not guarantee a better bond and makes more difficult the drying of the adhesive that is effective for bonding.
– 99% Cyano.
– Ethyl cyanoacrylate
– Use temperature: -55º to 120º
– Set time: between 3 and 10 seconds. The gaps and uneven surfaces can increase this setting time. It is not necessary to use clamps. Holding the pieces firmly for 10-30 seconds will ensure better adhesion.
– Definitive cure time: 24 h
– Viscosity: 110 mPa.S
– Shear strength: 21.0 MPa
* Bottles are not filled at a 100% to leave some air and make it work properly.
20g.
Cianoacrilato de uso general 401, secado rápido, extra fuerte, baja viscosidad especialmente formulado para la adhesión entre materiales que incluso pueden tener una superficie ácida. Se puede usar con caucho, cuero, madera, metal, resina y plástico. Las superficies a unir deben estar libres de suciedad, polvo y grasa. Se debe aplicar una pequeña cantidad de adhesivo; más cianoacrilato no garantiza una mejor unión y hace más difícil el secado del adhesivo que es efectivo para la unión.
– 99% Cyano
– Cianoacrilato de etilo
– Temperatura de uso: -55º a 120º
– Tiempo de fraguado: entre 3 y 10 segundos. Los huecos y las superficies irregulares pueden aumentar este tiempo de fraguado. No es necesario usar abrazaderas. Sostener las piezas firmemente durante 10-30 segundos asegurará una mejor adhesión.
– Tiempo de curado definitivo: 24 h.
– Viscosidad: 110 mPa.S
– Resistencia al corte: 21.0 MPa
*Las botellas no se llenan al 100% para dejar algo de aire y que funcione correctamente.
Aircraft scale modelling F.A.Q.
59,95€
380 Pages. Soft Cover. More than 2.500 images.
This book is a compilation of aircraft scale modelling techniques, step by step guides with hundreds of colour pictures for WWI, WWII, cold war and modern aircraft, showing a wide range of painting and weathering techniques. All aspects of aircraft modelling are covered in a way that is both easy to understand and follow. From tools, and how to use various materials, to camouflage painting, markings, engines, pilots, etc. This is a must have for aircraft modelers. F.A.Q. is a compendium of the main techniques used in aircraft modelling, explained from a beginner level, through to the most complex of tasks. Created by world famous modeler, Daniel Zamarbide, and aided by the most prominent aircraft modelers in Europe. A perfect tool for aircraft modelling enthusiasts.
GET YOUR DIGITAL COPY AT AK-INTERACTIVE APP for iOS and Android
380 Páginas. Tapa blanda. Más de 2.500 imágenes.
Este libro es una compilación de técnicas de modelismo aeronáutico, guías paso a paso con cientos de imágenes en color de la Primera Guerra Mundial, la Segunda Guerra Mundial, la guerra fría y los aviones modernos, que muestran una amplia gama de técnicas de pintura y envejecimiento. Todos los aspectos del modelismo de aviones están cubiertos de una manera que es fácil de entender y seguir. Desde herramientas y cómo usar diversos materiales, hasta pintura de camuflaje, marcas, motores, pilotos, etc. Esto es imprescindible para los modelistas de aviones. Aircraft F.A.Q. es un compendio de las principales técnicas utilizadas en el modelismo de aeronaves, explicado desde un nivel principiante, hasta las tareas más complejas. Creado por el mundialmente famoso modelista, Daniel Zamarbide, y ayudado por los modelistas de aviones más destacados de Europa. Una herramienta perfecta para los entusiastas del modelismo aeronáutico.
OBTENGA SU COPIA DIGITAL EN LA APLICACIÓN AK-INTERACTIVE para iOS y Android
AK183
5,60€The original one.
A high quality ultra matte varnish which can be applied with a brush or an airbrush to achieve a dead flat finish on any surface.
Acrylic Ultra Matte Varnish formulated for maximum airbrush performance. Water soluble, odorless, and non-toxic. Shake before each use. We recommend AK-712 Acrylic Thinner for thinning. Dries completely in 12 hours.
60 ml.
El Original.
Barniz ultra mate de alta calidad que puede ser aplicado con pincel o con aerógrafo para lograr un acabado mate en cualquier superficie.
Nuestro barniz ultra mate acrílico está formulado para el máximo rendimiento del aerógrafo. Soluble en agua, inodoro y no tóxico. Agitar antes de cada uso. Recomendamos AK-712 Acrylic Thinner para diluir. Se seca completamente en 12 horas.
60 ml.
MAGNET ULTRA RESISTANT CYANOCRYLATE GLUE
AK12015
7,60€20g.
General-purpose cyanoacrylate 401. Fast drying, extra strong, low viscosity, specially formulated for adhesion between materials that can even have an acidic surface. Can be used with rubber, leather, wood, metal, resin and plastic. The surfaces to be joined must be free of dirt, dust and grease. A small amount of adhesive should be applied; more cyanoacrylate does not guarantee a better bond and makes more difficult the drying of the adhesive that is effective for bonding.
– 99% Cyano.
– Ethyl cyanoacrylate
– Use temperature: -55º to 120º
– Set time: between 3 and 10 seconds. The gaps and uneven surfaces can increase this setting time. It is not necessary to use clamps. Holding the pieces firmly for 10-30 seconds will ensure better adhesion.
– Definitive cure time: 24 h
– Viscosity: 110 mPa.S
– Shear strength: 21.0 MPa
* Bottles are not filled at a 100% to leave some air and make it work properly.
20g.
Cianoacrilato de uso general 401, secado rápido, extra fuerte, baja viscosidad especialmente formulado para la adhesión entre materiales que incluso pueden tener una superficie ácida. Se puede usar con caucho, cuero, madera, metal, resina y plástico. Las superficies a unir deben estar libres de suciedad, polvo y grasa. Se debe aplicar una pequeña cantidad de adhesivo; más cianoacrilato no garantiza una mejor unión y hace más difícil el secado del adhesivo que es efectivo para la unión.
– 99% Cyano
– Cianoacrilato de etilo
– Temperatura de uso: -55º a 120º
– Tiempo de fraguado: entre 3 y 10 segundos. Los huecos y las superficies irregulares pueden aumentar este tiempo de fraguado. No es necesario usar abrazaderas. Sostener las piezas firmemente durante 10-30 segundos asegurará una mejor adhesión.
– Tiempo de curado definitivo: 24 h.
– Viscosidad: 110 mPa.S
– Resistencia al corte: 21.0 MPa
*Las botellas no se llenan al 100% para dejar algo de aire y que funcione correctamente.
Aircraft scale modelling F.A.Q.
59,95€
380 Pages. Soft Cover. More than 2.500 images.
This book is a compilation of aircraft scale modelling techniques, step by step guides with hundreds of colour pictures for WWI, WWII, cold war and modern aircraft, showing a wide range of painting and weathering techniques. All aspects of aircraft modelling are covered in a way that is both easy to understand and follow. From tools, and how to use various materials, to camouflage painting, markings, engines, pilots, etc. This is a must have for aircraft modelers. F.A.Q. is a compendium of the main techniques used in aircraft modelling, explained from a beginner level, through to the most complex of tasks. Created by world famous modeler, Daniel Zamarbide, and aided by the most prominent aircraft modelers in Europe. A perfect tool for aircraft modelling enthusiasts.
GET YOUR DIGITAL COPY AT AK-INTERACTIVE APP for iOS and Android
380 Páginas. Tapa blanda. Más de 2.500 imágenes.
Este libro es una compilación de técnicas de modelismo aeronáutico, guías paso a paso con cientos de imágenes en color de la Primera Guerra Mundial, la Segunda Guerra Mundial, la guerra fría y los aviones modernos, que muestran una amplia gama de técnicas de pintura y envejecimiento. Todos los aspectos del modelismo de aviones están cubiertos de una manera que es fácil de entender y seguir. Desde herramientas y cómo usar diversos materiales, hasta pintura de camuflaje, marcas, motores, pilotos, etc. Esto es imprescindible para los modelistas de aviones. Aircraft F.A.Q. es un compendio de las principales técnicas utilizadas en el modelismo de aeronaves, explicado desde un nivel principiante, hasta las tareas más complejas. Creado por el mundialmente famoso modelista, Daniel Zamarbide, y ayudado por los modelistas de aviones más destacados de Europa. Una herramienta perfecta para los entusiastas del modelismo aeronáutico.
OBTENGA SU COPIA DIGITAL EN LA APLICACIÓN AK-INTERACTIVE para iOS y Android
1/35 MIDDLE EASTERNERS IN THE STREET
MM HS-001
12,50€Buy 1/35 MIDDLE EASTERNERS IN THE STREET online for just 9,95€. AK Interactive acrylic paints, brushes for modelling, pigments, oils and filters for scale modeling.
MM SS-002
63,95€D9 bulldozer which has been used by Israel Defense Forces (IDF) since 1956 is one of the best bulldozers in the world. In October 2003, Israel Aerospace Industries (IAI) developed an all-new armor protection suite- Daqhpor Memugan- for D9R bulldozers which are heavily equipped in the IDF. This armor suite consists of an armored cab with high visibility as well as protection for engine, fuel & oil tanks and hydraulic and electrical systems.
The D9R bulldozer owns good protection and could even protect against RPG attack after being fitted with slat armor. Light weapons like machine guns can be mounted on the top of the cab for self-defense. It has been proved to be an efficient and durable combat support platform.
KIT INFO
This 1/35 scale plastic model kit of D9R armored bulldozer perfectly represents mechanical beauty and weight of the real vehicle. Workable dozer blade and ripper are precisely and accurately modeled; rich cab interior details are provided; door and window can be built in open or closed position; workable track links are included; U.S. Armed Forces and IDF painting schemes are provided.
Total length: 247mm width: 126mm
La excavadora D9 que ha sido utilizada por las Fuerzas de Defensa de Israel (FDI) desde 1956 es una de las mejores excavadoras del mundo. En octubre de 2003, Israel Aerospace Industries (IAI) desarrolló un nuevo conjunto de protección de blindaje, Daqhpor Memugan, para excavadoras D9R que están fuertemente equipadas en las FDI. Este conjunto de blindaje consta de una cabina blindada con alta visibilidad, así como protección para motores, tanques de combustible y aceite y sistemas hidráulicos y eléctricos.
El bulldozer D9R posee una buena protección e incluso podría proteger contra el ataque RPG después de estar equipado con armadura de lamas. Se pueden montar armas ligeras como ametralladoras en la parte superior de la cabina para defenderse. Se ha demostrado que es una plataforma de apoyo de combate eficiente y duradera.
INFORMACIÓN DEL KIT
Este kit de modelo de plástico a escala 1/35 de bulldozer blindado D9R representa perfectamente la belleza mecánica y el peso del vehículo real. La hoja topadora y el desgarrador viables se modelan con precisión y precisión; se proporcionan detalles interiores de la cabina; la puerta y la ventana se pueden construir en posición abierta o cerrada; se incluyen enlaces de pistas viables; Se proporcionan esquemas de pintura de las Fuerzas Armadas de EE. UU. Y de las FDI.
Longitud total: 247 mm de ancho: 126 mm
1/35 GERMAN HEAVY TANK SD.KFZ.182 KING TIGER
MM SPS-038
24,95€1/35 MIDDLE EASTERNERS IN THE STREET
MM HS-001
12,50€Buy 1/35 MIDDLE EASTERNERS IN THE STREET online for just 9,95€. AK Interactive acrylic paints, brushes for modelling, pigments, oils and filters for scale modeling.
Cookie | Duration | Description |
---|---|---|
PHPSESSID | session | This cookie is native to PHP applications. The cookie is used to store and identify a users' unique session ID for the purpose of managing user session on the website. The cookie is a session cookies and is deleted when all the browser windows are closed. |
viewed_cookie_policy | 1 year | The cookie is set by the GDPR Cookie Consent plugin to store whether or not the user has consented to the use of cookies. It does not store any personal data. |
Cookie | Duration | Description |
---|---|---|
pelm_last_loaded_shop_type | 1 month | No description available. |
woocommerce_recently_viewed | session | Description unavailable. |
wp_woocommerce_session_9205d68996927145eedf8afcab99571e | 2 days | No description |
yith_wcwl_session_9205d68996927145eedf8afcab99571e | 1 month | No description |
Cookie | Duration | Description |
---|---|---|
_fbp | 3 months | This cookie is set by Facebook to display advertisements when either on Facebook or on a digital platform powered by Facebook advertising, after visiting the website. |
fr | 3 months | Facebook sets this cookie to show relevant advertisements to users by tracking user behaviour across the web, on sites that have Facebook pixel or Facebook social plugin. |
loc | 1 year 1 month | AddThis sets this geolocation cookie to help understand the location of users who share the information. |
VISITOR_INFO1_LIVE | 5 months 27 days | A cookie set by YouTube to measure bandwidth that determines whether the user gets the new or old player interface. |
YSC | session | YSC cookie is set by Youtube and is used to track the views of embedded videos on Youtube pages. |
yt-remote-connected-devices | never | YouTube sets this cookie to store the video preferences of the user using embedded YouTube video. |
yt-remote-device-id | never | YouTube sets this cookie to store the video preferences of the user using embedded YouTube video. |
yt.innertube::nextId | never | This cookie, set by YouTube, registers a unique ID to store data on what videos from YouTube the user has seen. |
yt.innertube::requests | never | This cookie, set by YouTube, registers a unique ID to store data on what videos from YouTube the user has seen. |
Cookie | Duration | Description |
---|---|---|
_ga | 2 years | The _ga cookie, installed by Google Analytics, calculates visitor, session and campaign data and also keeps track of site usage for the site's analytics report. The cookie stores information anonymously and assigns a randomly generated number to recognize unique visitors. |
_ga_BK3V7Y3VZB | 2 years | This cookie is installed by Google Analytics. |
_gat_gtag_UA_105576964_1 | 1 minute | Set by Google to distinguish users. |
_gid | 1 day | Installed by Google Analytics, _gid cookie stores information on how visitors use a website, while also creating an analytics report of the website's performance. Some of the data that are collected include the number of visitors, their source, and the pages they visit anonymously. |
at-rand | never | AddThis sets this cookie to track page visits, sources of traffic and share counts. |
CONSENT | 2 years | YouTube sets this cookie via embedded youtube-videos and registers anonymous statistical data. |
uvc | 1 year 1 month | Set by addthis.com to determine the usage of addthis.com service. |
Cookie | Duration | Description |
---|---|---|
pll_language | 1 year | The pll _language cookie is used by Polylang to remember the language selected by the user when returning to the website, and also to get the language information when not available in another way. |