Weight | 2.13 kg |
---|---|
Dimensions | 41 × 26 × 10 cm |
Army | USA |
Brands | |
Materials | Plastic |
Product | |
Pack | Single |
Scale | 1/48 |
Theme | Aircraft, Military |
AK Points
Availability: In stock
63,25€
The B-26K Counter Invader aircraft began entering service with the US Air Force in the spring of 1964. Until April 1965, the USAF received all ordered copies. By this time, the American armed forces in Vietnam were in dire need of an anti-guerrilla aircraft, and in the spring of 1966 it was decided to deploy the B-26K in Southeast Asia. Based on airfields in Thailand, they flew combat missions to Laos. Since Thailand did not allow the basing of bombers on its territory, from May 1966, these aircraft were temporarily designated as attack aircraft – with the designation A-26A. And since the actions in Laos were considered unofficial, the Counter Invaders based in Southeast Asia did not carry national insignia.
Most of their combat missions, these attack aircraft made in the dark. The reason for this was the means of Vietnamese air defense, which posed a serious danger to piston aircraft at low speeds.
El avión B-26K Counter Invader comenzó a entrar en servicio con la Fuerza Aérea de los EE. UU. en la primavera de 1964. Hasta abril de 1965, la USAF recibió todas las copias ordenadas. En ese momento, las fuerzas armadas estadounidenses en Vietnam necesitaban urgentemente un avión antiguerrilla, y en la primavera de 1966 se decidió desplegar el B-26K en el sudeste asiático. Con base en aeródromos en Tailandia, volaron misiones de combate a Laos. Dado que Tailandia no permitió la base de bombarderos en su territorio, a partir de mayo de 1966, estos aviones fueron designados temporalmente como aviones de ataque, con la designación A-26A. Y dado que las acciones en Laos se consideraron no oficiales, los Counter Invaders con base en el sudeste asiático no portaban insignias nacionales.
La mayoría de sus misiones de combate, estos aviones de ataque se realizan en la oscuridad. La razón de esto fueron los medios de defensa aérea vietnamita, que representaban un grave peligro para los aviones de pistón a bajas velocidades.
ESCALA
1:48
PERIODO DE TIEMPO
después de 1950
MARCAS
В-26К 64-17651, 56.º Ala de Operaciones Especiales, 609.º Escuadrón de Operaciones Especiales, Nakhon Phanom, 1969
В-26К 64-17649, Base de la Fuerza Aérea Davis-Monthan, 1970
В-26К 64-17645, 56.º Ala de Operaciones Especiales, 609.º Escuadrón de Operaciones Especiales, Nakhon Phanom, 1969
В-26К 64-17679, primera ala de operaciones especiales, USAF, finales de la década de 1960
TAMAÑO DEL MODELO (LARGO X ANCHO)
325 x 455 mm
TAMAÑO DE CAJA
410x260x55mm
NÚMERO DE DETALLES
344+48
DISPONIBILIDAD DE FIGURAS
sí
CANTIDAD DE FIGURAS
5
Weight | 2.13 kg |
---|---|
Dimensions | 41 × 26 × 10 cm |
Army | USA |
Brands | |
Materials | Plastic |
Product | |
Pack | Single |
Scale | 1/48 |
Theme | Aircraft, Military |
ABT114
6,50€For precision works is necessary to keep the tip of your brushes in a perfect state. This gel is indicated to keep the tip sharp and in perfect use condition with all brushes fibers compacted and never open or deformed. With this gel you will keep your brushes always like new ones after using and cleaning them (it can be used after the application of our ABT117 Magic Potion for Brushes or any other chemical or natural cleaner).
MAGNET ULTRA RESISTANT CYANOCRYLATE GLUE
AK12015
7,60€20g.
General-purpose cyanoacrylate 401. Fast drying, extra strong, low viscosity, specially formulated for adhesion between materials that can even have an acidic surface. Can be used with rubber, leather, wood, metal, resin and plastic. The surfaces to be joined must be free of dirt, dust and grease. A small amount of adhesive should be applied; more cyanoacrylate does not guarantee a better bond and makes more difficult the drying of the adhesive that is effective for bonding.
– 99% Cyano.
– Ethyl cyanoacrylate
– Use temperature: -55º to 120º
– Set time: between 3 and 10 seconds. The gaps and uneven surfaces can increase this setting time. It is not necessary to use clamps. Holding the pieces firmly for 10-30 seconds will ensure better adhesion.
– Definitive cure time: 24 h
– Viscosity: 110 mPa.S
– Shear strength: 21.0 MPa
* Bottles are not filled at a 100% to leave some air and make it work properly.
20g.
Cianoacrilato de uso general 401, secado rápido, extra fuerte, baja viscosidad especialmente formulado para la adhesión entre materiales que incluso pueden tener una superficie ácida. Se puede usar con caucho, cuero, madera, metal, resina y plástico. Las superficies a unir deben estar libres de suciedad, polvo y grasa. Se debe aplicar una pequeña cantidad de adhesivo; más cianoacrilato no garantiza una mejor unión y hace más difícil el secado del adhesivo que es efectivo para la unión.
– 99% Cyano
– Cianoacrilato de etilo
– Temperatura de uso: -55º a 120º
– Tiempo de fraguado: entre 3 y 10 segundos. Los huecos y las superficies irregulares pueden aumentar este tiempo de fraguado. No es necesario usar abrazaderas. Sostener las piezas firmemente durante 10-30 segundos asegurará una mejor adhesión.
– Tiempo de curado definitivo: 24 h.
– Viscosidad: 110 mPa.S
– Resistencia al corte: 21.0 MPa
*Las botellas no se llenan al 100% para dejar algo de aire y que funcione correctamente.
Aircraft scale modelling F.A.Q.
57,00€
380 Pages. Soft Cover. More than 2.500 images.
This book is a compilation of aircraft scale modelling techniques, step by step guides with hundreds of colour pictures for WWI, WWII, cold war and modern aircraft, showing a wide range of painting and weathering techniques. All aspects of aircraft modelling are covered in a way that is both easy to understand and follow. From tools, and how to use various materials, to camouflage painting, markings, engines, pilots, etc. This is a must have for aircraft modelers. F.A.Q. is a compendium of the main techniques used in aircraft modelling, explained from a beginner level, through to the most complex of tasks. Created by world famous modeler, Daniel Zamarbide, and aided by the most prominent aircraft modelers in Europe. A perfect tool for aircraft modelling enthusiasts.
GET YOUR DIGITAL COPY AT AK-INTERACTIVE APP for iOS and Android
380 Páginas. Tapa blanda. Más de 2.500 imágenes.
Este libro es una compilación de técnicas de modelismo aeronáutico, guías paso a paso con cientos de imágenes en color de la Primera Guerra Mundial, la Segunda Guerra Mundial, la guerra fría y los aviones modernos, que muestran una amplia gama de técnicas de pintura y envejecimiento. Todos los aspectos del modelismo de aviones están cubiertos de una manera que es fácil de entender y seguir. Desde herramientas y cómo usar diversos materiales, hasta pintura de camuflaje, marcas, motores, pilotos, etc. Esto es imprescindible para los modelistas de aviones. Aircraft F.A.Q. es un compendio de las principales técnicas utilizadas en el modelismo de aeronaves, explicado desde un nivel principiante, hasta las tareas más complejas. Creado por el mundialmente famoso modelista, Daniel Zamarbide, y ayudado por los modelistas de aviones más destacados de Europa. Una herramienta perfecta para los entusiastas del modelismo aeronáutico.
OBTENGA SU COPIA DIGITAL EN LA APLICACIÓN AK-INTERACTIVE para iOS y Android
AK12004
4,95€40 ml.
Special square anti rolling base.
Ultra-thin precision maxoma fiber brush.
1. Special density.
2. Glue by capillary action, quick drying.
The Extra Thin Citrus Cement glues by capillary action with a medium / fast drying time, and has a mild citrus aroma. It is undoubtedly the best option for general assembly work. Great performance with the perfect viscosity for plastic modeling.
*Same characteristics as our AK12002 Extra Thin Cement but with an aromatic touch.
40 ml.
Base especial antivuelco cuadrada.
Pincel de fibra maxoma de precisión ultrafina.
1. Densidad especial.
2. Pegamento por capilaridad, uniones muy rápidas.
El Extra Fino Cítrico tiene las características del pegamento extra fino pero con un aroma cítrico suave. Para pegar por capilaridad con un tiempo de secado medio / rápido, es sin duda la mejor opción para el trabajo de montaje general. Gran rendimiento con la viscosidad perfecta para modelar plástico.
*Las mismas características que nuestro AK12002 Extra Thin Cement pero con un toque aromático.
SURVIVAL WEATHERING BRUSHES SET
AK663
12,20€An arsenal of brushes designed by the weathering experts here at AK. Top quality weathering products require the right tools to be applied; our Survival Weathering Brush set is the right set of tools you need. Contained in this set are the brushes needed to streak, chip, wash, and apply pigments plus much more.
Includes:
Un arsenal de pinceles diseñados por los expertos en weathering de AK. Los productos de weathering de alta calidad requieren la aplicación de las mismas con las herramientas adecuadas; nuestro juego de pinceles de supervivencia es el conjunto de herramientas adecuado que necesitas. En este juego se encuentran los pinceles necesarios para rayar, astillar, lavar y aplicar pigmentos y mucho más.
Incluye:
AK11505
7,95€
TOP LINE DELUXE Marta Kolinsky KIT
ABT850
71,95€AK050
5,90€Our odorless turpentine is very different from our white spirit. Besides being odorless, this product is softer and less aggressive than our White Spirit. This property of the odorless thinner (Turpentine) makes it great for delicate, soft and subtle blending. This thinner is exclusive to enamel and oil paint. This larger bottle gives you more thinner and costs less when compared to buying three 35ml bottles.
AK183
5,25€A high quality ultra matte varnish which can be applied with a brush or an airbrush to achieve a dead flat finish on any surface.
Acrylic Ultra Matte Varnish formulated for maximum airbrush performance. Water soluble, odorless, and non-toxic. Shake before each use. We recommend AK-712 Acrylic Thinner for thinning. Dries completely in 12 hours.
60 ml.
Barniz ultra mate de alta calidad que puede ser aplicado con pincel o con aerógrafo para lograr un acabado plano en cualquier superficie.
Barniz ultra mate acrílico formulado para el máximo rendimiento del aerógrafo. Soluble en agua, inodoro y no tóxico. Agitar antes de cada uso. Recomendamos AK-712 Acrylic Thinner para diluir. Se seca completamente en 12 horas.
60 ml.
AK9009
9,90€Description language || Idioma de la descripción:
ENGLISH
Precision cutting pliers with an ergonomic handle covered with an orange non-slip vinyl foam, with a spring return.
They make a clean and precise cut. No need to touch up.
Suitable for parts or rods of plastic, PVC, resin or ABS less than 4mm.
Do not use to cut metal parts.
Alicates de corte de precisión con mango ergonómico cubierto con espuma de vinilo naranja, antideslizante y con muelle de retorno.
Realizan un corte limpio y preciso sin que sea necesario retocar.
Adecuado para piezas o varillas de plástico, PVC, resina o ABS menores de 4mm.
No utilizar para cortar piezas de metal.
ABT114
6,50€For precision works is necessary to keep the tip of your brushes in a perfect state. This gel is indicated to keep the tip sharp and in perfect use condition with all brushes fibers compacted and never open or deformed. With this gel you will keep your brushes always like new ones after using and cleaning them (it can be used after the application of our ABT117 Magic Potion for Brushes or any other chemical or natural cleaner).
MAGNET ULTRA RESISTANT CYANOCRYLATE GLUE
AK12015
7,60€20g.
General-purpose cyanoacrylate 401. Fast drying, extra strong, low viscosity, specially formulated for adhesion between materials that can even have an acidic surface. Can be used with rubber, leather, wood, metal, resin and plastic. The surfaces to be joined must be free of dirt, dust and grease. A small amount of adhesive should be applied; more cyanoacrylate does not guarantee a better bond and makes more difficult the drying of the adhesive that is effective for bonding.
– 99% Cyano.
– Ethyl cyanoacrylate
– Use temperature: -55º to 120º
– Set time: between 3 and 10 seconds. The gaps and uneven surfaces can increase this setting time. It is not necessary to use clamps. Holding the pieces firmly for 10-30 seconds will ensure better adhesion.
– Definitive cure time: 24 h
– Viscosity: 110 mPa.S
– Shear strength: 21.0 MPa
* Bottles are not filled at a 100% to leave some air and make it work properly.
20g.
Cianoacrilato de uso general 401, secado rápido, extra fuerte, baja viscosidad especialmente formulado para la adhesión entre materiales que incluso pueden tener una superficie ácida. Se puede usar con caucho, cuero, madera, metal, resina y plástico. Las superficies a unir deben estar libres de suciedad, polvo y grasa. Se debe aplicar una pequeña cantidad de adhesivo; más cianoacrilato no garantiza una mejor unión y hace más difícil el secado del adhesivo que es efectivo para la unión.
– 99% Cyano
– Cianoacrilato de etilo
– Temperatura de uso: -55º a 120º
– Tiempo de fraguado: entre 3 y 10 segundos. Los huecos y las superficies irregulares pueden aumentar este tiempo de fraguado. No es necesario usar abrazaderas. Sostener las piezas firmemente durante 10-30 segundos asegurará una mejor adhesión.
– Tiempo de curado definitivo: 24 h.
– Viscosidad: 110 mPa.S
– Resistencia al corte: 21.0 MPa
*Las botellas no se llenan al 100% para dejar algo de aire y que funcione correctamente.
Aircraft scale modelling F.A.Q.
57,00€
380 Pages. Soft Cover. More than 2.500 images.
This book is a compilation of aircraft scale modelling techniques, step by step guides with hundreds of colour pictures for WWI, WWII, cold war and modern aircraft, showing a wide range of painting and weathering techniques. All aspects of aircraft modelling are covered in a way that is both easy to understand and follow. From tools, and how to use various materials, to camouflage painting, markings, engines, pilots, etc. This is a must have for aircraft modelers. F.A.Q. is a compendium of the main techniques used in aircraft modelling, explained from a beginner level, through to the most complex of tasks. Created by world famous modeler, Daniel Zamarbide, and aided by the most prominent aircraft modelers in Europe. A perfect tool for aircraft modelling enthusiasts.
GET YOUR DIGITAL COPY AT AK-INTERACTIVE APP for iOS and Android
380 Páginas. Tapa blanda. Más de 2.500 imágenes.
Este libro es una compilación de técnicas de modelismo aeronáutico, guías paso a paso con cientos de imágenes en color de la Primera Guerra Mundial, la Segunda Guerra Mundial, la guerra fría y los aviones modernos, que muestran una amplia gama de técnicas de pintura y envejecimiento. Todos los aspectos del modelismo de aviones están cubiertos de una manera que es fácil de entender y seguir. Desde herramientas y cómo usar diversos materiales, hasta pintura de camuflaje, marcas, motores, pilotos, etc. Esto es imprescindible para los modelistas de aviones. Aircraft F.A.Q. es un compendio de las principales técnicas utilizadas en el modelismo de aeronaves, explicado desde un nivel principiante, hasta las tareas más complejas. Creado por el mundialmente famoso modelista, Daniel Zamarbide, y ayudado por los modelistas de aviones más destacados de Europa. Una herramienta perfecta para los entusiastas del modelismo aeronáutico.
OBTENGA SU COPIA DIGITAL EN LA APLICACIÓN AK-INTERACTIVE para iOS y Android
AK12004
4,95€40 ml.
Special square anti rolling base.
Ultra-thin precision maxoma fiber brush.
1. Special density.
2. Glue by capillary action, quick drying.
The Extra Thin Citrus Cement glues by capillary action with a medium / fast drying time, and has a mild citrus aroma. It is undoubtedly the best option for general assembly work. Great performance with the perfect viscosity for plastic modeling.
*Same characteristics as our AK12002 Extra Thin Cement but with an aromatic touch.
40 ml.
Base especial antivuelco cuadrada.
Pincel de fibra maxoma de precisión ultrafina.
1. Densidad especial.
2. Pegamento por capilaridad, uniones muy rápidas.
El Extra Fino Cítrico tiene las características del pegamento extra fino pero con un aroma cítrico suave. Para pegar por capilaridad con un tiempo de secado medio / rápido, es sin duda la mejor opción para el trabajo de montaje general. Gran rendimiento con la viscosidad perfecta para modelar plástico.
*Las mismas características que nuestro AK12002 Extra Thin Cement pero con un toque aromático.
SURVIVAL WEATHERING BRUSHES SET
AK663
12,20€An arsenal of brushes designed by the weathering experts here at AK. Top quality weathering products require the right tools to be applied; our Survival Weathering Brush set is the right set of tools you need. Contained in this set are the brushes needed to streak, chip, wash, and apply pigments plus much more.
Includes:
Un arsenal de pinceles diseñados por los expertos en weathering de AK. Los productos de weathering de alta calidad requieren la aplicación de las mismas con las herramientas adecuadas; nuestro juego de pinceles de supervivencia es el conjunto de herramientas adecuado que necesitas. En este juego se encuentran los pinceles necesarios para rayar, astillar, lavar y aplicar pigmentos y mucho más.
Incluye:
AK11505
7,95€
PZW 9789198477597
11,50€Wingspan Special #1. 1/32nd Scale Aircraft Modelling Book.
In this first special edition of the popular Wingspan series, Canfora presents the incredible work of Jan Kopecky, creator of the cover models for Wingspan 1 and 2. Over 48-pages, the book describes Jan’s build of the Tamiya F-16C in detail. Commercial product as well as scratch-built and 3D-printed enhancements are all covered, as well as the painting and weathering process.
Book Data
Author & Modeller: Jan Kopecky
ISBN: 9789198477597
Language: English
Photos: 160 colour photos
Pages: 48
Physical: Softcover, 290x210mm, landscape
1/48 Boeing F/A-18F Super Hornet
MM LS-013
72,50€As the latest F / A-18 variants, the F / A-18E / F aircraft have greatly improved electronic equipment and extended combat radius. To perform the missions like air superiority and ground attack and complex tasks including reconnaissance and electronic warfare, the F / A-18F’s rear cockpit weapon systems operator has new advanced cockpit displays and control system. The pilot and the weapon systems operator can perform air-to-air and air-to-ground tasks at the same time. Before the next-generation carrier-based fighters enter service, the F / A-18F will still be the main combat aircraft of the U.S. aircraft carrier battle group.
MENG releases this brand-new LS-013 Boeing F/A-18E Super Hornet model kit licensed by The Boeing Company. The finished model will be 377.9mm long and 273.4mm wide. This kit includes pre-cut stainless steel PE parts and pre-cut painting masks.
LS-013 Boeing F/A-18F Super Hornet
Scale: 1/48
Release in: July 2021
Flaps and slats can be installed in retracted or deployed positions.
Horizontal stabilizers and rudders are movable.
The two-seat variant’s cockpit and cockpit interior equipment are precisely replicated.
The specially designed pluggable main pylons allow the easy change of weapons; this kit includes AGM-65 air-to-ground missiles and GBU-16 laser-guided bombs.
Two U.S. Navy pilot figures featuring realistic gestures and finely replicated suit and equipment are included. Two flight helmet options are provided.
This kit includes optional exterior parts.
Como las últimas variantes del F / A-18, los aviones F / A-18E / F tienen equipos electrónicos muy mejorados y un radio de combate extendido. Para realizar misiones como superioridad aérea y ataque terrestre y tareas complejas que incluyen reconocimiento y guerra electrónica, el operador de sistemas de armas de la cabina trasera del F / A-18F tiene nuevas pantallas de cabina y un sistema de control avanzados. El piloto y el operador de sistemas de armas pueden realizar tareas aire-aire y aire-tierra al mismo tiempo. Antes de que los cazas basados en portaaviones de próxima generación entren en servicio, el F / A-18F seguirá siendo el principal avión de combate del grupo de batalla de portaaviones de EE. UU.
MENG lanza este nuevo kit modelo LS-013 Boeing F / A-18E Super Hornet con licencia de The Boeing Company. El modelo terminado tendrá 377,9 mm de largo y 273,4 mm de ancho. Este kit incluye piezas de PE de acero inoxidable precortadas y máscaras de pintura precortadas.
LS-013 Boeing F / A-18F Super Hornet
Escala: 1/48
Lanzamiento: julio de 2021
Las aletas y las lamas se pueden instalar en posiciones retraídas o desplegadas.
Los timones y estabilizadores horizontales son móviles.
La cabina del piloto y el equipamiento interior de la cabina de la variante de dos asientos se reproducen con precisión.
Los pilones principales enchufables especialmente diseñados permiten el cambio fácil de armas; este kit incluye misiles aire-tierra AGM-65 y bombas guiadas por láser GBU-16.
Se incluyen dos figuras de piloto de la Marina de los EE. UU. Con gestos realistas y un traje y equipo finamente replicados. Se proporcionan dos opciones de casco de vuelo.
Este kit incluye piezas exteriores opcionales.
Italian Paratroopers ‘Nembo Division’ WW II 1/35
TB 35129
27,00€2 figures.
Sculpted by Marco Pezzotti
Boxart painted by Fabrizio Marini
2 figuras.
Esculpido por Marco Pezzotti
Boxart pintado por Fabrizio Marini
MJEZ35021
10,95€SCALE : 1/35
3D PRINTED
EASY ASSEMBLING AND HIGH RESOLUTION.
ESCALA: 1/35
IMPRESO EN 3D
FÁCIL MONTAJE Y ALTA RESOLUCIÓN.
TB 35082
27,00€2 figures.
Sculpted by Krisztian Bodi
Boxart painted by Juan Antonio Pérez Marchante
2 figuras.
Esculpido por Krisztian Bodi
Boxart pintado por Juan Antonio Pérez Marchante
Tracks for M113 with worn out rubber pads 1/35
MTL-35114
32,50€Metal Tracks for M113 with worn out rubber pads
Scale 1/35
Cadenas metalicas para M113 con almohadillas de goma gastadas
Escala 1/35
FCM 36, French Light Tank in German Service 1/35
ICM 35337
36,95€After the defeat of France in the summer of 1940, a large number of French armored vehicles fell into the hands of the Wehrmacht. Many samples went to the winners in perfect condition. Later, the German army used them in various combat operations, and also used them as auxiliary and training equipment.
Among the captured samples were the FCM 36 tanks, which were previously part of two French tank battalions. Before the defeat of France, they managed to take part in several combat episodes in the spring and summer of 1940. The total number of these combat vehicles received by the Wehrmacht numbered about 50 copies. Later, many of them became the basis for the creation of self-propelled anti-tank guns and self-propelled howitzers.
Después de la derrota de Francia en el verano de 1940, una gran cantidad de vehículos blindados franceses cayó en manos de la Wehrmacht. Muchas muestras llegaron a los ganadores en perfectas condiciones. Posteriormente, el ejército alemán los utilizó en diversas operaciones de combate, y también los utilizó como equipo auxiliar y de entrenamiento.
Entre las muestras capturadas se encontraban los tanques FCM 36, que anteriormente formaban parte de dos batallones de tanques franceses. Antes de la derrota de Francia, lograron participar en varios episodios de combate en la primavera y el verano de 1940. El número total de estos vehículos de combate recibidos por la Wehrmacht ascendía a unas 50 copias. Más tarde, muchos de ellos se convirtieron en la base para la creación de cañones antitanques autopropulsados y obuses autopropulsados.
Escala
1:35
Periodo de tiempo
WW2
Marcas
Panzerkampfwagen 737 FCM (f), aproximadamente 1940
FCM 36, tanque 30061 del cuarto batallón de tanques francés. Capturado por las fuerzas alemanas en junio de 1940
FCM 36, tanque 30022 del 7 ° batallón de tanques francés. Capturado por las fuerzas alemanas en junio de 1940
Tamaño del modelo (largo x alto)
126 x 62 mm
Tamaño de caja
295 x 225 x 40 mm
Numero de detalles
158
Australian army M113A1 APC with T50 turret Vietnam war 1/35
AFV AF35291
66,95€■ New tooling parts for Australian Army M113 APC ‘Nam period.
■ Brand new Australian Army M113 APC configured top deck.
■ New T50 turret with internal details.
■ All New Australian Army infantry weapon set in VN War period.
■ New decal and painting instruction for units served in VN War period.
■ Nuevas piezas de herramientas para el período Nam del Ejército Australiano M113 APC ‘.
■ Cubierta superior configurada APC M113 del ejército australiano completamente nueva.
■ Nueva torreta T50 con detalles internos.
■ Todas las nuevas armas de infantería del ejército australiano ambientadas en el período de la Guerra VN.
■ Nuevas instrucciones de pintura y calcomanías para las unidades que sirvieron en el período de la Guerra VN.
1/48 U.S. Laser-Guided Bombs & Anti-Radiation Missiles
MM SPS-072
14,50€As the U.S. military has taken the lead in completing the digitalization of armed forces, its air power, as a highly specialized force, has received a wide range of advanced airborne weapons for complex battlefield situations.
MENG will release the SPS-072 U.S. Laser-Guided Bombs & Anti-Radiation Missiles model kit which includes various airborne weapons used by the U.S. military. Now let’s take a look!
SPS-072 U.S. Laser-Guided Bombs & Anti-Radiation Missiles
Scale: 1/48
Release in: July 2021
This model kit includes four types of laser-guided bombs: GBU-10/GBU-12/GBU-16/GBU-24 (two of each), and three types of anti-radiation missiles: AGM-65/AGM-78/AGM-88 (two of each).
A medida que el ejército de los EE. UU. Ha tomado la iniciativa para completar la digitalización de las fuerzas armadas, su poder aéreo, como fuerza altamente especializada, ha recibido una amplia gama de armas aerotransportadas avanzadas para situaciones complejas en el campo de batalla.
MENG lanzará el kit modelo SPS-072 de bombas guiadas por láser y misiles antirradiación de EE. UU. Que incluye varias armas aerotransportadas utilizadas por el ejército de los EE. UU. ¡Ahora echemos un vistazo!
SPS-072 Bombas guiadas por láser y misiles antirradiación de EE. UU.
Escala: 1/48
Lanzamiento: julio de 2021
Este kit modelo incluye cuatro tipos de bombas guiadas por láser: GBU-10 / GBU-12 / GBU-16 / GBU-24 (dos de cada uno) y tres tipos de misiles antirradiación: AGM-65 / AGM-78 / AGM-88 (dos de cada uno).
MJEZ35022
10,95€SCALE : 1/35
3D PRINTED
EASY ASSEMBLING AND HIGH RESOLUTION.
ESCALA: 1/35
IMPRESO EN 3D
FÁCIL MONTAJE Y ALTA RESOLUCIÓN.
IDF 1/4 TON 4×4 M38A1/CJ05 An-ti Tank Missile Vehicle 1/35
AFV AF35S97
25,95€■ Precision photo-etched for radiator guard grill.
■ Newly tooled IDF M38A1/CJ-5 tools and accessories.
■ Brand new TOW fire control system and mounting adopter.
■ Newly tooled OREV operators crew seats.
■ Highly detailed chassis.
■ Highly detailed engine compartment.
■ Two types of launch tube included for optional use.
■ Decals for vehicles used in the Yom Kippur War.
■ The Launch carrel has two version could choice (long and short).
■ Fotograbado de precisión para rejilla de protección del radiador.
■ Herramientas y accesorios IDF M38A1 / CJ-5 recién confeccionados.
■ Nuevo sistema de control de incendios TOW y dispositivo de montaje.
■ Asientos de la tripulación de operadores OREV recién equipados.
■ Chasis muy detallado.
■ Compartimento del motor muy detallado.
■ Se incluyen dos tipos de tubo de lanzamiento para uso opcional.
■ Calcomanías para vehículos usados en la Guerra de Yom Kipur.
■ El carro de lanzamiento tiene dos versiones posibles (larga y corta).
ED11151
37,95€Limited edition kit of British WWI fighter aircraft Sopwith F.1 Camel in 1/48 scale with two Biggles fictional markings.
Kit de edición limitada del avión de combate británico de la Primera Guerra Mundial Sopwith F.1 Camel en escala 1/48 con dos marcas ficticias Biggles.
PZW 9789198477597
11,50€Wingspan Special #1. 1/32nd Scale Aircraft Modelling Book.
In this first special edition of the popular Wingspan series, Canfora presents the incredible work of Jan Kopecky, creator of the cover models for Wingspan 1 and 2. Over 48-pages, the book describes Jan’s build of the Tamiya F-16C in detail. Commercial product as well as scratch-built and 3D-printed enhancements are all covered, as well as the painting and weathering process.
Book Data
Author & Modeller: Jan Kopecky
ISBN: 9789198477597
Language: English
Photos: 160 colour photos
Pages: 48
Physical: Softcover, 290x210mm, landscape
1/48 Boeing F/A-18F Super Hornet
MM LS-013
72,50€As the latest F / A-18 variants, the F / A-18E / F aircraft have greatly improved electronic equipment and extended combat radius. To perform the missions like air superiority and ground attack and complex tasks including reconnaissance and electronic warfare, the F / A-18F’s rear cockpit weapon systems operator has new advanced cockpit displays and control system. The pilot and the weapon systems operator can perform air-to-air and air-to-ground tasks at the same time. Before the next-generation carrier-based fighters enter service, the F / A-18F will still be the main combat aircraft of the U.S. aircraft carrier battle group.
MENG releases this brand-new LS-013 Boeing F/A-18E Super Hornet model kit licensed by The Boeing Company. The finished model will be 377.9mm long and 273.4mm wide. This kit includes pre-cut stainless steel PE parts and pre-cut painting masks.
LS-013 Boeing F/A-18F Super Hornet
Scale: 1/48
Release in: July 2021
Flaps and slats can be installed in retracted or deployed positions.
Horizontal stabilizers and rudders are movable.
The two-seat variant’s cockpit and cockpit interior equipment are precisely replicated.
The specially designed pluggable main pylons allow the easy change of weapons; this kit includes AGM-65 air-to-ground missiles and GBU-16 laser-guided bombs.
Two U.S. Navy pilot figures featuring realistic gestures and finely replicated suit and equipment are included. Two flight helmet options are provided.
This kit includes optional exterior parts.
Como las últimas variantes del F / A-18, los aviones F / A-18E / F tienen equipos electrónicos muy mejorados y un radio de combate extendido. Para realizar misiones como superioridad aérea y ataque terrestre y tareas complejas que incluyen reconocimiento y guerra electrónica, el operador de sistemas de armas de la cabina trasera del F / A-18F tiene nuevas pantallas de cabina y un sistema de control avanzados. El piloto y el operador de sistemas de armas pueden realizar tareas aire-aire y aire-tierra al mismo tiempo. Antes de que los cazas basados en portaaviones de próxima generación entren en servicio, el F / A-18F seguirá siendo el principal avión de combate del grupo de batalla de portaaviones de EE. UU.
MENG lanza este nuevo kit modelo LS-013 Boeing F / A-18E Super Hornet con licencia de The Boeing Company. El modelo terminado tendrá 377,9 mm de largo y 273,4 mm de ancho. Este kit incluye piezas de PE de acero inoxidable precortadas y máscaras de pintura precortadas.
LS-013 Boeing F / A-18F Super Hornet
Escala: 1/48
Lanzamiento: julio de 2021
Las aletas y las lamas se pueden instalar en posiciones retraídas o desplegadas.
Los timones y estabilizadores horizontales son móviles.
La cabina del piloto y el equipamiento interior de la cabina de la variante de dos asientos se reproducen con precisión.
Los pilones principales enchufables especialmente diseñados permiten el cambio fácil de armas; este kit incluye misiles aire-tierra AGM-65 y bombas guiadas por láser GBU-16.
Se incluyen dos figuras de piloto de la Marina de los EE. UU. Con gestos realistas y un traje y equipo finamente replicados. Se proporcionan dos opciones de casco de vuelo.
Este kit incluye piezas exteriores opcionales.
Italian Paratroopers ‘Nembo Division’ WW II 1/35
TB 35129
27,00€2 figures.
Sculpted by Marco Pezzotti
Boxart painted by Fabrizio Marini
2 figuras.
Esculpido por Marco Pezzotti
Boxart pintado por Fabrizio Marini
MJEZ35021
10,95€SCALE : 1/35
3D PRINTED
EASY ASSEMBLING AND HIGH RESOLUTION.
ESCALA: 1/35
IMPRESO EN 3D
FÁCIL MONTAJE Y ALTA RESOLUCIÓN.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.