Weight | 0.8 kg |
---|---|
Dimensions | 30 × 20 × 10 cm |
Weight | 0.8 kg |
---|---|
Dimensions | 30 × 20 × 10 cm |
AK9204
6,95€ENGLISH
MAGNET ULTRA RESISTANT CYANOCRYLATE GLUE
AK12015
7,60€20g.
General-purpose cyanoacrylate 401. Fast drying, extra strong, low viscosity, specially formulated for adhesion between materials that can even have an acidic surface. Can be used with rubber, leather, wood, metal, resin and plastic. The surfaces to be joined must be free of dirt, dust and grease. A small amount of adhesive should be applied; more cyanoacrylate does not guarantee a better bond and makes more difficult the drying of the adhesive that is effective for bonding.
– 99% Cyano.
– Ethyl cyanoacrylate
– Use temperature: -55º to 120º
– Set time: between 3 and 10 seconds. The gaps and uneven surfaces can increase this setting time. It is not necessary to use clamps. Holding the pieces firmly for 10-30 seconds will ensure better adhesion.
– Definitive cure time: 24 h
– Viscosity: 110 mPa.S
– Shear strength: 21.0 MPa
* Bottles are not filled at a 100% to leave some air and make it work properly.
20g.
Cianoacrilato de uso general 401, secado rápido, extra fuerte, baja viscosidad especialmente formulado para la adhesión entre materiales que incluso pueden tener una superficie ácida. Se puede usar con caucho, cuero, madera, metal, resina y plástico. Las superficies a unir deben estar libres de suciedad, polvo y grasa. Se debe aplicar una pequeña cantidad de adhesivo; más cianoacrilato no garantiza una mejor unión y hace más difícil el secado del adhesivo que es efectivo para la unión.
– 99% Cyano
– Cianoacrilato de etilo
– Temperatura de uso: -55º a 120º
– Tiempo de fraguado: entre 3 y 10 segundos. Los huecos y las superficies irregulares pueden aumentar este tiempo de fraguado. No es necesario usar abrazaderas. Sostener las piezas firmemente durante 10-30 segundos asegurará una mejor adhesión.
– Tiempo de curado definitivo: 24 h.
– Viscosidad: 110 mPa.S
– Resistencia al corte: 21.0 MPa
*Las botellas no se llenan al 100% para dejar algo de aire y que funcione correctamente.
AK050
6,20€Our odorless turpentine is very different from our white spirit. Besides being odorless, this product is softer and less aggressive than our White Spirit. This property of the odorless thinner (Turpentine) makes it great for delicate, soft and subtle blending. This thinner is exclusive to enamel and oil paint. This larger bottle gives you more thinner and costs less when compared to buying three 35ml bottles.
100 ml.
Nuestra trementina inodora es muy diferente de nuestro white spirit. Además de ser inodoro, este producto es más suave y menos agresivo que nuestro White Spirit. Esta propiedad del diluyente inodoro (Turpentine) lo hace ideal para mezclas delicadas, suaves y sutiles. Este diluyente es exclusivo para esmalte y pintura al óleo. Esta botella más grande le proporciona más diluyente y cuesta menos en comparación con la compra de tres botellas de 35 ml.
100 ml.
ABT114
6,75€For precision works is necessary to keep the tip of your brushes in a perfect state. This gel is indicated to keep the tip sharp and in perfect use condition with all brushes fibers compacted and never open or deformed. With this gel you will keep your brushes always like new ones after using and cleaning them (it can be used after the application of our ABT117 Magic Potion for Brushes or any other chemical or natural cleaner).
Para trabajos de precisión es necesario mantener la punta de sus pinceles en perfecto estado. Este gel está indicado para mantener la punta afilada y en perfecto estado de uso con todas las fibras de los pinceles compactadas y nunca abiertas o deformadas. Con este gel mantendrá sus pinceles siempre como nuevos después de usarlos y limpiarlos (se puede utilizar después de la aplicación de nuestra Poción Mágica para Pinceles ABT117 o cualquier otro limpiador químico o natural).
AK9009
10,95€Precision cutting pliers with an ergonomic handle covered with an orange non-slip vinyl foam, with a spring return.
They make a clean and precise cut. No need to touch up.
Suitable for parts or rods of plastic, PVC, resin or ABS less than 4mm.
Do not use to cut metal parts.
Alicates de corte de precisión con mango ergonómico cubierto con espuma de vinilo naranja, antideslizante y con muelle de retorno.
Realizan un corte limpio y preciso sin que sea necesario retocar.
Adecuado para piezas o varillas de plástico, PVC, resina o ABS menores de 4mm.
No utilizar para cortar piezas de metal.
TOP LINE DELUXE Marta Kolinsky KIT
ABT850
80,95€FA 614
19,50€A set designed for thorough cleaning of any airbrush.
A glass jar with a plastic screw cap is used to purge the airbrush with the cleaner after each use. Thanks to a special filter in the upper part, all impurities and liquid remain in the container. Additionally, the lid is equipped with an airbrush stand.
Cleaners and rods are used to thoroughly clean various elements of airbrushes: tips, nozzles, bodies and other elements. The needle, on the other hand, cleans the inside of the airbrush nozzle or other internal parts of the airbrush, such as the needle guide channel.
Container Height: 85mm, diameter: 100mm.
Un conjunto diseñado para la limpieza a fondo de cualquier aerógrafo.
Se usa un frasco de vidrio con un tapón de rosca de plástico para purgar el aerógrafo con el limpiador después de cada uso. Gracias a un filtro especial en la parte superior, todas las impurezas y líquidos permanecen en el recipiente. Además, la tapa está equipada con un soporte para aerógrafo.
Los limpiadores y las varillas se utilizan para limpiar a fondo varios elementos de los aerógrafos: puntas, boquillas, cuerpos y otros elementos. La aguja, por otro lado, limpia el interior de la boquilla del aerógrafo u otras partes internas del aerógrafo, como el canal de guía de la aguja.
Altura del contenedor: 85 mm, diámetro: 100 mm.
AK183
5,60€The original one.
A high quality ultra matte varnish which can be applied with a brush or an airbrush to achieve a dead flat finish on any surface.
Acrylic Ultra Matte Varnish formulated for maximum airbrush performance. Water soluble, odorless, and non-toxic. Shake before each use. We recommend AK-712 Acrylic Thinner for thinning. Dries completely in 12 hours.
60 ml.
El Original.
Barniz ultra mate de alta calidad que puede ser aplicado con pincel o con aerógrafo para lograr un acabado mate en cualquier superficie.
Nuestro barniz ultra mate acrílico está formulado para el máximo rendimiento del aerógrafo. Soluble en agua, inodoro y no tóxico. Agitar antes de cada uso. Recomendamos AK-712 Acrylic Thinner para diluir. Se seca completamente en 12 horas.
60 ml.
AK11505
7,95€
SURVIVAL WEATHERING BRUSHES SET
AK663
12,20€An arsenal of brushes designed by the weathering experts here at AK. Top quality weathering products require the right tools to be applied; our Survival Weathering Brush set is the right set of tools you need. Contained in this set are the brushes needed to streak, chip, wash, and apply pigments plus much more.
Includes:
Un arsenal de pinceles diseñados por los expertos en weathering de AK. Los productos de weathering de alta calidad requieren una aplicación con las herramientas adecuadas; nuestro juego de pinceles de supervivencia es el conjunto de herramientas adecuado que necesitas. En este juego se encuentran los pinceles necesarios para hacer líneas, desconchar, hacer lavados, aplicar pigmentos y mucho más.
Incluye:
AK9204
6,95€ENGLISH
MAGNET ULTRA RESISTANT CYANOCRYLATE GLUE
AK12015
7,60€20g.
General-purpose cyanoacrylate 401. Fast drying, extra strong, low viscosity, specially formulated for adhesion between materials that can even have an acidic surface. Can be used with rubber, leather, wood, metal, resin and plastic. The surfaces to be joined must be free of dirt, dust and grease. A small amount of adhesive should be applied; more cyanoacrylate does not guarantee a better bond and makes more difficult the drying of the adhesive that is effective for bonding.
– 99% Cyano.
– Ethyl cyanoacrylate
– Use temperature: -55º to 120º
– Set time: between 3 and 10 seconds. The gaps and uneven surfaces can increase this setting time. It is not necessary to use clamps. Holding the pieces firmly for 10-30 seconds will ensure better adhesion.
– Definitive cure time: 24 h
– Viscosity: 110 mPa.S
– Shear strength: 21.0 MPa
* Bottles are not filled at a 100% to leave some air and make it work properly.
20g.
Cianoacrilato de uso general 401, secado rápido, extra fuerte, baja viscosidad especialmente formulado para la adhesión entre materiales que incluso pueden tener una superficie ácida. Se puede usar con caucho, cuero, madera, metal, resina y plástico. Las superficies a unir deben estar libres de suciedad, polvo y grasa. Se debe aplicar una pequeña cantidad de adhesivo; más cianoacrilato no garantiza una mejor unión y hace más difícil el secado del adhesivo que es efectivo para la unión.
– 99% Cyano
– Cianoacrilato de etilo
– Temperatura de uso: -55º a 120º
– Tiempo de fraguado: entre 3 y 10 segundos. Los huecos y las superficies irregulares pueden aumentar este tiempo de fraguado. No es necesario usar abrazaderas. Sostener las piezas firmemente durante 10-30 segundos asegurará una mejor adhesión.
– Tiempo de curado definitivo: 24 h.
– Viscosidad: 110 mPa.S
– Resistencia al corte: 21.0 MPa
*Las botellas no se llenan al 100% para dejar algo de aire y que funcione correctamente.
AK050
6,20€Our odorless turpentine is very different from our white spirit. Besides being odorless, this product is softer and less aggressive than our White Spirit. This property of the odorless thinner (Turpentine) makes it great for delicate, soft and subtle blending. This thinner is exclusive to enamel and oil paint. This larger bottle gives you more thinner and costs less when compared to buying three 35ml bottles.
100 ml.
Nuestra trementina inodora es muy diferente de nuestro white spirit. Además de ser inodoro, este producto es más suave y menos agresivo que nuestro White Spirit. Esta propiedad del diluyente inodoro (Turpentine) lo hace ideal para mezclas delicadas, suaves y sutiles. Este diluyente es exclusivo para esmalte y pintura al óleo. Esta botella más grande le proporciona más diluyente y cuesta menos en comparación con la compra de tres botellas de 35 ml.
100 ml.
ABT114
6,75€For precision works is necessary to keep the tip of your brushes in a perfect state. This gel is indicated to keep the tip sharp and in perfect use condition with all brushes fibers compacted and never open or deformed. With this gel you will keep your brushes always like new ones after using and cleaning them (it can be used after the application of our ABT117 Magic Potion for Brushes or any other chemical or natural cleaner).
Para trabajos de precisión es necesario mantener la punta de sus pinceles en perfecto estado. Este gel está indicado para mantener la punta afilada y en perfecto estado de uso con todas las fibras de los pinceles compactadas y nunca abiertas o deformadas. Con este gel mantendrá sus pinceles siempre como nuevos después de usarlos y limpiarlos (se puede utilizar después de la aplicación de nuestra Poción Mágica para Pinceles ABT117 o cualquier otro limpiador químico o natural).
AK9009
10,95€Precision cutting pliers with an ergonomic handle covered with an orange non-slip vinyl foam, with a spring return.
They make a clean and precise cut. No need to touch up.
Suitable for parts or rods of plastic, PVC, resin or ABS less than 4mm.
Do not use to cut metal parts.
Alicates de corte de precisión con mango ergonómico cubierto con espuma de vinilo naranja, antideslizante y con muelle de retorno.
Realizan un corte limpio y preciso sin que sea necesario retocar.
Adecuado para piezas o varillas de plástico, PVC, resina o ABS menores de 4mm.
No utilizar para cortar piezas de metal.
TOP LINE DELUXE Marta Kolinsky KIT
ABT850
80,95€AK9058
86,95€A set containing a die plate with 10 different punch tools, from 0,6mm to 2mm and a mini hammer. You only need to put the styrene, other plastic or aluminum or brass sheet between the Plexiglas and the metal plate underneath by loosen up the screws, chosen the needed diameter and matching the hole with the punch tool. Tight the screws for holding up the sheet and hit the head of the punch tool with the hammer. You will be able to make round head rivets.
Weight: 330 gr.
Un set que contiene una base con 10 herramientas de perforación diferentes, con medidas que van desde 0,6mm a 2mm y un mini martillo. Tan sólo necesitas poner la hoja de estireno, otro plástico o una hoja de aluminio o latón entre el plexiglás y el metal inferior aflojando los tornillos, elegir el diámetro adecuado y que coincidan tanto la herramienta de perforación como el agujero seleccionado. Apretar los tornillos para sujetar la hoja y golpear la cabeza de la herramienta de perforación con el martillo. Podrás hacer remaches de cabeza redonda.
Peso: 330 gr.
AK 195mm Piranha PE bending tool
AK9063
55,95€Photoetch bender tool. Separate the piece needed from the photoetch sheet. Put the piece inside by loosing up the screws and fix it in place by tighten the screws without forcing them. Bend the piece with the help of of the razor until you get the precise shape. 195 millimeters wide.
Weight: 555 gr.
Herramienta de doblado de fotograbados. Separe la pieza necesaria de la hoja de fotograbado. Coloque la pieza dentro de la herramienta aflojando los tornillos y fíjela apretando los tornillos sin forzarlos. Doble la pieza con la ayuda de la hoja de afeitar hasta obtener la forma precisa. 195 milímetros de ancho.
Peso: 555 gr.
AK-HPD Hexagonal Punch and Die set
AK9056
69,95€A set containing a die plate with 6 different hexagonal punch tools, from 0,7mm to 2mm and a mini hammer. You only need to put the styrene or other plastic sheet between the Plexiglas and the metal plate underneath by loosen up the screws, chosen the needed diameter and matching the hole with the punch tool. Tight the screws for holding up the sheet and hit the head of the punch tool with the hammer. You will be able to make nuts, hexagonal head bolts and other details.
Weight: 250 gr.
Un set que contiene una base con 6 herramientas hexagonales de perforación diferentes, con medidas que van desde 0,7mm a 2mm y un mini martillo. Tan sólo necesitas poner la hoja de estireno o del plástico disponible entre el plexiglás y el metal inferior aflojando los tornillos, elegir el diámetro adecuado y que coincidan tanto la herramienta de perforación como el agujero seleccionado. Apretar los tornillos para sujetar la hoja y golpear la cabeza de la herramienta de perforación con el martillo. Podrás hacer tornillos de cabeza hexagonal, tuercas y otros detalles.
Peso: 250 gr.
PZW 9780955594076
19,50€Series of books dedicated to show the wrecks of German vehicles destroyed during World War II, with unpublished photos that locate the subject in time and in the right place, allowing to can carry modeling or research work with historical rigor, a must in the shelves of any fan. The pictures are of great quality and interest and the size is quite enough to can show details of the vehicle.
Authors: Lee Archer and William Auerbach
ISBN: 9780955594076
Language: English (UK)
Photos: 114
Pages: 96
Physical: Softcover, 280x210mm, landscape
Vehicle List / Lista de vehículos
Jagdtiger
Tiger I
Panther Ausf.D (Schulwanne)
Panther Ausf.A
Panther Ausf.G
Panther turret on stand
Bergepanther
Jagdpanther
Pz.Kpfw.IV Ausf.B/C
Pz.Kpfw.IV Ausf.C-F
Pz.Kpfw.IV Ausf.G
Pz.Kpfw.IV Ausf.H
Pz.Kpfw.IV Ausf.J Final
Pz.Beob.Wg.IV Ausf.J
Pz.Kpfw.IV Holzattrappe
Panzer IV/70(V)
Panzer IV/70(A) als Befehlswagen
Sturmgeschütz IV
8.8cm Flak auf Pz.Kpfw.IV
Flakpanzer Wirbelwind Prototype
Hummel
Sturmgeschütz III Ausf.G
Sturmgeschütz III Ausf.F
gr.Pz.Bef.Wg. Ausf.D1
PzJgr 38 für 7.62cm Pak 36
Jagdpanzer 38 Pz.Kpfw.II Schulwanne (mit Holzvergasser)
Pz.Kpfw.I Ausf.A Schulwanne (mit Holzvergasser)
Pz.Kpfw.I Ausf.A Schulwanne (Pz.Kpfw.III Attrappe)
Pz.Kpfw.I Ausf.A Schulwanne
Pz.Kpfw.I Ausf.A
Munitionspanzer I
kl.Pz.Bef.Wg (Sd.Kfz.265)
7.5cm Pak40/1 auf Sfl.LrS
4.7cm Pak(t) auf Fgst.35R (f)
Pz.Sp.Wg. AMR35(f)
8cm GrW 34 auf Pz.Sp.Wg. AMR35 (f)
Renault UE 630 (f)(Triebgas?)
Pz.Kpfw.L6/40 733 (i)
StuG L6 mit 47/32 770 (i)
Sd.Kfz.251/3
Sd.Kfz.251/7
Sd.Kfz.251/21
Sd.Kfz.251/22
Sd.Kfz.251 Ausf.C
Sd.Kfz.251Ausf.C mit Drilling
Sd.Kfz.11/1 mit Drilling
HK 605
Sd.Kfz.234/2
Sd.Kfz.234/3
Sd.Kfz.234/4
Pz.Sp.Wg.AB41 201 (i)
Serie de libros dedicada a mostrar los restos de vehículos alemanes destruidos durante la Segunda Guerra Mundial, con fotos inéditas que localizan en tiempo y lugar al sujeto, permitiendo el poder realizar trabajos de modelismo o de búsqueda histórica con rigor, un libro imprescindible en las estanterías de los aficionados. Las fotos son de gran calidad e interés y el tamaño es lo suficientemente grande como para poder mostrar detalles del vehículo.
Authors: Lee Archer and William Auerbach
ISBN: 9780955594076
Language: English (UK)
Photos: 114
Pages: 96
Physical: Softcover, 280x210mm, landscape
Vehicle List / Lista de vehículos
Jagdtiger
Tiger I
Panther Ausf.D (Schulwanne)
Panther Ausf.A
Panther Ausf.G
Panther turret on stand
Bergepanther
Jagdpanther
Pz.Kpfw.IV Ausf.B/C
Pz.Kpfw.IV Ausf.C-F
Pz.Kpfw.IV Ausf.G
Pz.Kpfw.IV Ausf.H
Pz.Kpfw.IV Ausf.J Final
Pz.Beob.Wg.IV Ausf.J
Pz.Kpfw.IV Holzattrappe
Panzer IV/70(V)
Panzer IV/70(A) als Befehlswagen
Sturmgeschütz IV
8.8cm Flak auf Pz.Kpfw.IV
Flakpanzer Wirbelwind Prototype
Hummel
Sturmgeschütz III Ausf.G
Sturmgeschütz III Ausf.F
gr.Pz.Bef.Wg. Ausf.D1
PzJgr 38 für 7.62cm Pak 36
Jagdpanzer 38 Pz.Kpfw.II Schulwanne (mit Holzvergasser)
Pz.Kpfw.I Ausf.A Schulwanne (mit Holzvergasser)
Pz.Kpfw.I Ausf.A Schulwanne (Pz.Kpfw.III Attrappe)
Pz.Kpfw.I Ausf.A Schulwanne
Pz.Kpfw.I Ausf.A
Munitionspanzer I
kl.Pz.Bef.Wg (Sd.Kfz.265)
7.5cm Pak40/1 auf Sfl.LrS
4.7cm Pak(t) auf Fgst.35R (f)
Pz.Sp.Wg. AMR35(f)
8cm GrW 34 auf Pz.Sp.Wg. AMR35 (f)
Renault UE 630 (f)(Triebgas?)
Pz.Kpfw.L6/40 733 (i)
StuG L6 mit 47/32 770 (i)
Sd.Kfz.251/3
Sd.Kfz.251/7
Sd.Kfz.251/21
Sd.Kfz.251/22
Sd.Kfz.251 Ausf.C
Sd.Kfz.251Ausf.C mit Drilling
Sd.Kfz.11/1 mit Drilling
HK 605
Sd.Kfz.234/2
Sd.Kfz.234/3
Sd.Kfz.234/4
Pz.Sp.Wg.AB41 201 (i)
AK9070
19,95€Ideal tool for helping to make barrels and curved small PE parts. Just bend the sheet or piece over the appropriate measure forcing it to take the shape. Diameters available, 4, 6, 8, 10, 12, 16 and 20 millimeters. Length of 195mm. Easy to use and elegant tool.
Material: Eloxed aluminium
Herramienta ideal para ayudar a hacer barriles y pequeñas piezas curvas de fotograbado. Simplemente doble la hoja o la pieza sobre la medida apropiada forzándola a tomar la forma. Diámetros disponibles, 4, 6, 8, 10, 12, 16 y 20 milímetros. Longitud de 195 mm. Herramienta fácil de usar y elegante.
Material: Aluminio Eloxed
AK9067
6,95€Razor blade for RP Toolz Cutter
Thickness 0,25 mm
5pcs
Cuchilla para RP Toolz Cutter
Espesor 0,25 mm
5 piezas
AK 135mm Piranha PE bending tool
AK9062
46,95€Photoetch bender tool. Separate the piece needed from the photoetch sheet. Put the piece inside by loosing up the screws and fix it in place by tighten the screws without forcing them. Bend the piece with the help of of the razor until you get the precise shape. 135 millimeters wide.
Weight: 385 gr.
Herramienta de doblado de fotograbados. Separe la pieza necesaria de la hoja de fotograbado. Coloque la pieza dentro de la herramienta aflojando los tornillos y fíjela apretando los tornillos sin forzarlos. Doble la pieza con la ayuda de la hoja de afeitar hasta obtener la forma precisa. 135 milímetros de ancho.
Peso: 385 gr.
AK 300mm Piranha PE bending tool
AK9064
66,95€Photoetch bender tool. Separate the piece needed from the photoetch sheet. Put the piece inside by loosing up the screws and fix it in place by tighten the screws without forcing them. Bend the piece with the help of of the razor until you get the precise shape. 300 millimeters wide.
Weight: 1050 gr.
Herramienta de doblado de fotograbados. Separe la pieza necesaria de la hoja de fotograbado. Coloque la pieza dentro de la herramienta aflojando los tornillos y fíjela apretando los tornillos sin forzarlos. Doble la pieza con la ayuda de la hoja de afeitar hasta obtener la forma precisa. 300 milímetros de ancho.
Peso: 1050 gr.
AK9054
86,95€A set containing a die plate with 16 different punch tools, from 0,5mm to 2mm with 0,1mm steps and a mini hammer. You only need to put the styrene or other plastic sheet between the Plexiglas and the metal plate underneath by loosen up the screws, chosen the needed diameter and matching the hole with the punch tool. Tight the screws for holding up the sheet and hit the head of the punch tool with the hammer. You will be able to make round head bolts, rivets, buttons and many more small pieces and details.
Weight: 380 gr.
Un set que contiene una base con 16 herramientas de perforación diferentes, con medidas que van desde 0,5mm a 2mm en saltos de 0,1mm y un mini martillo. Tan sólo necesitas poner la hoja de estireno o del plástico disponible entre el plexiglás y el metal inferior aflojando los tornillos, elegir el diámetro adecuado y que coincidan tanto la herramienta de perforación como el agujero seleccionado. Apretar los tornillos para sujetar la hoja y golpear la cabeza de la herramienta de perforación con el martillo. Podrás hacer tornillos de cabeza redonda, remaches, botones y muchas más piezas pequeñas redondas y detalles.
Peso: 380 gr.
PZW 9781908032065
37,95€Illustrated study of the vehicles designed, developed and produced at the M·A·N plant in Nürnberg during the period 1934-1945. Although the production of trucks was, and remains, an essential factor in the company’s success, it was M·A·N’s experience designing armoured fighting vehicles during the ‘30s and early ‘40s that led to the Pz.Kpfw.V ‘Panther’ in 1942 for which it is most renowned during WWII.
Authors: Roddy MacDougall and Darren Neely. Foreword by Hilary Doyle
ISBN: 9781908032065
Pages: 223
Photos: 222. Plus a separate colour map of the factory
Physical: Hardcover, 270x210mm, landscape
Vehicle List / Lista de vehículos
Various M·A·N trucks
Sperrmaschine amphibious truck
GHH GKF.281/M 28 Räder-Raupen-Kampfwagen
Landsverk fm31
Pz.Kpfw.I Ausf.A.
Panzer-Schulfahrzeug Ausf.B
La.S Versuchs Fahrgestell
Pz.Kpfw.II Ausf.D2 Fahrgestell
Pz.Kpfw.II (2cm) Ausf.F
VK 9.01 Versuchs Fgst
0 Serie VK 9.01
VK 13.03 Versuchs Fgst
Versuchs Fgst VK 16.01
‘Luchs’ Versuchs Fgst (Tatra engine)
Pz.Kpfw.III (5cm L/42) Ausf.G
Pz.Kpfw.III (5cm) Ausf.J Sturmgeschütz III Ausf.G
Pz.Kpfw.II Ausf.B
Pz.Kpfw.II Ausf.c
VK 13.03 Pz.Sp.Wg II Ausf.L “Luchs”
Pz.Jgr.II für 7.5cm Pak 40/2 (Sd.Kfz.131)
Pz.Jgr.II für 7.62cm Pak 36(r) (Sd.Kfz.132)
8.8cm Pak43/1 auf Fgst.Pz.Kpfw. III/IV (Sf.) Hornisse
Versuchs Panther
Panther Ausf.D
Panther Ausf.D with sheet metal cabin replacing turret
Versuchs Wanne Fgst.Nr.V1 with Panther II running gear
Panther Ausf.A
Panther II
Panther Ausf.G
Versuchs Bergepanther
Stunning interiors
Estudio ilustrado de los vehículos diseñados, desarrollados y producidos en la planta M·A·N en Núremberg durante el período de 1934 a 1945. Aunque la producción de camiones fue y sigue siendo un factor esencial en el éxito de la compañía, fue la experiencia de M·A·N en el diseño de vehículos blindados de combate durante los años 30 y principios de los 40 lo que llevó al Pz.Kpfw.V ‘Panther’ en 1942 a convertirse en uno de los vehículos más famosos de la Segunda Guerra Mundial.
Authors: Roddy MacDougall and Darren Neely. Foreword by Hilary Doyle
ISBN: 9781908032065
Pages: 223
Photos: 222. Plus a separate colour map of the factory
Physical: Hardcover, 270x210mm, landscape
Vehicle List / Lista de vehículos
Various M·A·N trucks
Sperrmaschine amphibious truck
GHH GKF.281/M 28 Räder-Raupen-Kampfwagen
Landsverk fm31
Pz.Kpfw.I Ausf.A.
Panzer-Schulfahrzeug Ausf.B
La.S Versuchs Fahrgestell
Pz.Kpfw.II Ausf.D2 Fahrgestell
Pz.Kpfw.II (2cm) Ausf.F
VK 9.01 Versuchs Fgst
0 Serie VK 9.01
VK 13.03 Versuchs Fgst
Versuchs Fgst VK 16.01
‘Luchs’ Versuchs Fgst (Tatra engine)
Pz.Kpfw.III (5cm L/42) Ausf.G
Pz.Kpfw.III (5cm) Ausf.J Sturmgeschütz III Ausf.G
Pz.Kpfw.II Ausf.B
Pz.Kpfw.II Ausf.c
VK 13.03 Pz.Sp.Wg II Ausf.L “Luchs”
Pz.Jgr.II für 7.5cm Pak 40/2 (Sd.Kfz.131)
Pz.Jgr.II für 7.62cm Pak 36(r) (Sd.Kfz.132)
8.8cm Pak43/1 auf Fgst.Pz.Kpfw. III/IV (Sf.) Hornisse
Versuchs Panther
Panther Ausf.D
Panther Ausf.D with sheet metal cabin replacing turret
Versuchs Wanne Fgst.Nr.V1 with Panther II running gear
Panther Ausf.A
Panther II
Panther Ausf.G
Versuchs Bergepanther
Stunning interiors
PZW 9781908032058
19,50€Series of books dedicated to show the wrecks of German vehicles destroyed during World War II, with unpublished photos that locate the subject in time and in the right place, allowing to can carry modeling or research work with historical rigor, a must in the shelves of any fan. The pictures are of great quality and interest and the size is quite enough to can show details of the vehicle.
Authors: Lee Archer and William Auerbach
ISBN: 9781908032058
Language: English (UK)
Photos: 132
Pages: 96
Physical: Softcover, 280x210mm, landscape. Gatefold jacket
Vehicle List / Lista de vehículos
Karlgerät
Jagdtiger
Tiger II
Panther Ausf.D
Panther Ausf.A
Panther Ausf.G
Panther Ausf.G (LSW)
Jagdpanther
8.8cm Flak auf Pz.Kpfw.IV
Pz.Kpfw.IV Ausf.J
Sturmgeschütz IV
Jagdpanzer IV
Hummel
Nashorn (Hornisse)
Sturmgeschütz III Ausf.G
Sturmhaubitze 42
Pz.Beob.Wg.III
Pz.Kpfw.III Ausf.G/H
Pz.Kpfw.III Ausf.J Tp Pz.Jgr.II für 7.5cm Pak 40
Pz.Kpfw.I Ausf.A Schulwanne
Pz.Kpfw.B2 (Flamm)
Pz.Kpfw.B2 Schulwanne
Pz.Kpfw.35S 739 (f)
Sfl 7.5cm Pak 40 auf Fgst.38H 735 (f)
Pz.Kpfw.35R 731 (f)
4.7cm Pak (t) (Sf) auf Fgst.35R (f)
Pz.Kpfw.R40
Pz.Sp.Wg. AMR-35 (f)
Sd.Kfz.251 Ausf.D (partisan use)
Sd.Kfz.251/3
Sd.Kfz.251/3
Sd.Kfz.7/2
Sd.kfz.11/1
Sd.Kfz.9
Sd.Kfz.234 mit 2cm Schwebelafette
Matford F917-WS mit 2cm Flakvierling
Kettenkrad
Serie de libros dedicada a mostrar los restos de vehículos alemanes destruidos durante la Segunda Guerra Mundial, con fotos inéditas que localizan en tiempo y lugar al sujeto, permitiendo el poder realizar trabajos de modelismo o de búsqueda histórica con rigor, un libro imprescindible en las estanterías de los aficionados. Las fotos son de gran calidad e interés y el tamaño es lo suficientemente grande como para poder mostrar detalles del vehículo.
Authors: Lee Archer and William Auerbach
ISBN: 9781908032058
Language: English (UK)
Photos: 132
Pages: 96
Physical: Softcover, 280x210mm, landscape. Gatefold jacket
Vehicle List / Lista de vehículos
Karlgerät
Jagdtiger
Tiger II
Panther Ausf.D
Panther Ausf.A
Panther Ausf.G
Panther Ausf.G (LSW)
Jagdpanther
8.8cm Flak auf Pz.Kpfw.IV
Pz.Kpfw.IV Ausf.J
Sturmgeschütz IV
Jagdpanzer IV
Hummel
Nashorn (Hornisse)
Sturmgeschütz III Ausf.G
Sturmhaubitze 42
Pz.Beob.Wg.III
Pz.Kpfw.III Ausf.G/H
Pz.Kpfw.III Ausf.J Tp Pz.Jgr.II für 7.5cm Pak 40
Pz.Kpfw.I Ausf.A Schulwanne
Pz.Kpfw.B2 (Flamm)
Pz.Kpfw.B2 Schulwanne
Pz.Kpfw.35S 739 (f)
Sfl 7.5cm Pak 40 auf Fgst.38H 735 (f)
Pz.Kpfw.35R 731 (f)
4.7cm Pak (t) (Sf) auf Fgst.35R (f)
Pz.Kpfw.R40
Pz.Sp.Wg. AMR-35 (f)
Sd.Kfz.251 Ausf.D (partisan use)
Sd.Kfz.251/3
Sd.Kfz.251/3
Sd.Kfz.7/2
Sd.kfz.11/1
Sd.Kfz.9
Sd.Kfz.234 mit 2cm Schwebelafette
Matford F917-WS mit 2cm Flakvierling
Kettenkrad
AK9061
38,95€Photoetch bender tool. Separate the piece needed from the photoetch sheet. Put the piece inside by loosing up the screws and fix it in place by tighten the screws without forcing them. Bend the piece with the help of of the razor until you get the precise shape. 18 centimeters wide.
Weight: 380 gr.
*Licensed by RP TOOLZ
Herramienta de doblado de fotograbados. Separe la pieza necesaria de la hoja de fotograbado. Coloque la pieza dentro de la herramienta aflojando los tornillos y fíjela apretando los tornillos sin forzarlos. Doble la pieza con la ayuda de la hoja de afeitar hasta obtener la forma precisa. 18 centímetros de ancho.
Peso: 380 gr.
*Licensed by RP TOOLZ
AK9058
86,95€A set containing a die plate with 10 different punch tools, from 0,6mm to 2mm and a mini hammer. You only need to put the styrene, other plastic or aluminum or brass sheet between the Plexiglas and the metal plate underneath by loosen up the screws, chosen the needed diameter and matching the hole with the punch tool. Tight the screws for holding up the sheet and hit the head of the punch tool with the hammer. You will be able to make round head rivets.
Weight: 330 gr.
Un set que contiene una base con 10 herramientas de perforación diferentes, con medidas que van desde 0,6mm a 2mm y un mini martillo. Tan sólo necesitas poner la hoja de estireno, otro plástico o una hoja de aluminio o latón entre el plexiglás y el metal inferior aflojando los tornillos, elegir el diámetro adecuado y que coincidan tanto la herramienta de perforación como el agujero seleccionado. Apretar los tornillos para sujetar la hoja y golpear la cabeza de la herramienta de perforación con el martillo. Podrás hacer remaches de cabeza redonda.
Peso: 330 gr.
AK 195mm Piranha PE bending tool
AK9063
55,95€Photoetch bender tool. Separate the piece needed from the photoetch sheet. Put the piece inside by loosing up the screws and fix it in place by tighten the screws without forcing them. Bend the piece with the help of of the razor until you get the precise shape. 195 millimeters wide.
Weight: 555 gr.
Herramienta de doblado de fotograbados. Separe la pieza necesaria de la hoja de fotograbado. Coloque la pieza dentro de la herramienta aflojando los tornillos y fíjela apretando los tornillos sin forzarlos. Doble la pieza con la ayuda de la hoja de afeitar hasta obtener la forma precisa. 195 milímetros de ancho.
Peso: 555 gr.
AK-HPD Hexagonal Punch and Die set
AK9056
69,95€A set containing a die plate with 6 different hexagonal punch tools, from 0,7mm to 2mm and a mini hammer. You only need to put the styrene or other plastic sheet between the Plexiglas and the metal plate underneath by loosen up the screws, chosen the needed diameter and matching the hole with the punch tool. Tight the screws for holding up the sheet and hit the head of the punch tool with the hammer. You will be able to make nuts, hexagonal head bolts and other details.
Weight: 250 gr.
Un set que contiene una base con 6 herramientas hexagonales de perforación diferentes, con medidas que van desde 0,7mm a 2mm y un mini martillo. Tan sólo necesitas poner la hoja de estireno o del plástico disponible entre el plexiglás y el metal inferior aflojando los tornillos, elegir el diámetro adecuado y que coincidan tanto la herramienta de perforación como el agujero seleccionado. Apretar los tornillos para sujetar la hoja y golpear la cabeza de la herramienta de perforación con el martillo. Podrás hacer tornillos de cabeza hexagonal, tuercas y otros detalles.
Peso: 250 gr.
PZW 9780955594076
19,50€Series of books dedicated to show the wrecks of German vehicles destroyed during World War II, with unpublished photos that locate the subject in time and in the right place, allowing to can carry modeling or research work with historical rigor, a must in the shelves of any fan. The pictures are of great quality and interest and the size is quite enough to can show details of the vehicle.
Authors: Lee Archer and William Auerbach
ISBN: 9780955594076
Language: English (UK)
Photos: 114
Pages: 96
Physical: Softcover, 280x210mm, landscape
Vehicle List / Lista de vehículos
Jagdtiger
Tiger I
Panther Ausf.D (Schulwanne)
Panther Ausf.A
Panther Ausf.G
Panther turret on stand
Bergepanther
Jagdpanther
Pz.Kpfw.IV Ausf.B/C
Pz.Kpfw.IV Ausf.C-F
Pz.Kpfw.IV Ausf.G
Pz.Kpfw.IV Ausf.H
Pz.Kpfw.IV Ausf.J Final
Pz.Beob.Wg.IV Ausf.J
Pz.Kpfw.IV Holzattrappe
Panzer IV/70(V)
Panzer IV/70(A) als Befehlswagen
Sturmgeschütz IV
8.8cm Flak auf Pz.Kpfw.IV
Flakpanzer Wirbelwind Prototype
Hummel
Sturmgeschütz III Ausf.G
Sturmgeschütz III Ausf.F
gr.Pz.Bef.Wg. Ausf.D1
PzJgr 38 für 7.62cm Pak 36
Jagdpanzer 38 Pz.Kpfw.II Schulwanne (mit Holzvergasser)
Pz.Kpfw.I Ausf.A Schulwanne (mit Holzvergasser)
Pz.Kpfw.I Ausf.A Schulwanne (Pz.Kpfw.III Attrappe)
Pz.Kpfw.I Ausf.A Schulwanne
Pz.Kpfw.I Ausf.A
Munitionspanzer I
kl.Pz.Bef.Wg (Sd.Kfz.265)
7.5cm Pak40/1 auf Sfl.LrS
4.7cm Pak(t) auf Fgst.35R (f)
Pz.Sp.Wg. AMR35(f)
8cm GrW 34 auf Pz.Sp.Wg. AMR35 (f)
Renault UE 630 (f)(Triebgas?)
Pz.Kpfw.L6/40 733 (i)
StuG L6 mit 47/32 770 (i)
Sd.Kfz.251/3
Sd.Kfz.251/7
Sd.Kfz.251/21
Sd.Kfz.251/22
Sd.Kfz.251 Ausf.C
Sd.Kfz.251Ausf.C mit Drilling
Sd.Kfz.11/1 mit Drilling
HK 605
Sd.Kfz.234/2
Sd.Kfz.234/3
Sd.Kfz.234/4
Pz.Sp.Wg.AB41 201 (i)
Serie de libros dedicada a mostrar los restos de vehículos alemanes destruidos durante la Segunda Guerra Mundial, con fotos inéditas que localizan en tiempo y lugar al sujeto, permitiendo el poder realizar trabajos de modelismo o de búsqueda histórica con rigor, un libro imprescindible en las estanterías de los aficionados. Las fotos son de gran calidad e interés y el tamaño es lo suficientemente grande como para poder mostrar detalles del vehículo.
Authors: Lee Archer and William Auerbach
ISBN: 9780955594076
Language: English (UK)
Photos: 114
Pages: 96
Physical: Softcover, 280x210mm, landscape
Vehicle List / Lista de vehículos
Jagdtiger
Tiger I
Panther Ausf.D (Schulwanne)
Panther Ausf.A
Panther Ausf.G
Panther turret on stand
Bergepanther
Jagdpanther
Pz.Kpfw.IV Ausf.B/C
Pz.Kpfw.IV Ausf.C-F
Pz.Kpfw.IV Ausf.G
Pz.Kpfw.IV Ausf.H
Pz.Kpfw.IV Ausf.J Final
Pz.Beob.Wg.IV Ausf.J
Pz.Kpfw.IV Holzattrappe
Panzer IV/70(V)
Panzer IV/70(A) als Befehlswagen
Sturmgeschütz IV
8.8cm Flak auf Pz.Kpfw.IV
Flakpanzer Wirbelwind Prototype
Hummel
Sturmgeschütz III Ausf.G
Sturmgeschütz III Ausf.F
gr.Pz.Bef.Wg. Ausf.D1
PzJgr 38 für 7.62cm Pak 36
Jagdpanzer 38 Pz.Kpfw.II Schulwanne (mit Holzvergasser)
Pz.Kpfw.I Ausf.A Schulwanne (mit Holzvergasser)
Pz.Kpfw.I Ausf.A Schulwanne (Pz.Kpfw.III Attrappe)
Pz.Kpfw.I Ausf.A Schulwanne
Pz.Kpfw.I Ausf.A
Munitionspanzer I
kl.Pz.Bef.Wg (Sd.Kfz.265)
7.5cm Pak40/1 auf Sfl.LrS
4.7cm Pak(t) auf Fgst.35R (f)
Pz.Sp.Wg. AMR35(f)
8cm GrW 34 auf Pz.Sp.Wg. AMR35 (f)
Renault UE 630 (f)(Triebgas?)
Pz.Kpfw.L6/40 733 (i)
StuG L6 mit 47/32 770 (i)
Sd.Kfz.251/3
Sd.Kfz.251/7
Sd.Kfz.251/21
Sd.Kfz.251/22
Sd.Kfz.251 Ausf.C
Sd.Kfz.251Ausf.C mit Drilling
Sd.Kfz.11/1 mit Drilling
HK 605
Sd.Kfz.234/2
Sd.Kfz.234/3
Sd.Kfz.234/4
Pz.Sp.Wg.AB41 201 (i)
Cookie | Duration | Description |
---|---|---|
PHPSESSID | session | This cookie is native to PHP applications. The cookie is used to store and identify a users' unique session ID for the purpose of managing user session on the website. The cookie is a session cookies and is deleted when all the browser windows are closed. |
viewed_cookie_policy | 1 year | The cookie is set by the GDPR Cookie Consent plugin to store whether or not the user has consented to the use of cookies. It does not store any personal data. |
Cookie | Duration | Description |
---|---|---|
pelm_last_loaded_shop_type | 1 month | No description available. |
woocommerce_recently_viewed | session | Description unavailable. |
wp_woocommerce_session_9205d68996927145eedf8afcab99571e | 2 days | No description |
yith_wcwl_session_9205d68996927145eedf8afcab99571e | 1 month | No description |
Cookie | Duration | Description |
---|---|---|
_fbp | 3 months | This cookie is set by Facebook to display advertisements when either on Facebook or on a digital platform powered by Facebook advertising, after visiting the website. |
fr | 3 months | Facebook sets this cookie to show relevant advertisements to users by tracking user behaviour across the web, on sites that have Facebook pixel or Facebook social plugin. |
loc | 1 year 1 month | AddThis sets this geolocation cookie to help understand the location of users who share the information. |
VISITOR_INFO1_LIVE | 5 months 27 days | A cookie set by YouTube to measure bandwidth that determines whether the user gets the new or old player interface. |
YSC | session | YSC cookie is set by Youtube and is used to track the views of embedded videos on Youtube pages. |
yt-remote-connected-devices | never | YouTube sets this cookie to store the video preferences of the user using embedded YouTube video. |
yt-remote-device-id | never | YouTube sets this cookie to store the video preferences of the user using embedded YouTube video. |
yt.innertube::nextId | never | This cookie, set by YouTube, registers a unique ID to store data on what videos from YouTube the user has seen. |
yt.innertube::requests | never | This cookie, set by YouTube, registers a unique ID to store data on what videos from YouTube the user has seen. |
Cookie | Duration | Description |
---|---|---|
_ga | 2 years | The _ga cookie, installed by Google Analytics, calculates visitor, session and campaign data and also keeps track of site usage for the site's analytics report. The cookie stores information anonymously and assigns a randomly generated number to recognize unique visitors. |
_ga_BK3V7Y3VZB | 2 years | This cookie is installed by Google Analytics. |
_gat_gtag_UA_105576964_1 | 1 minute | Set by Google to distinguish users. |
_gid | 1 day | Installed by Google Analytics, _gid cookie stores information on how visitors use a website, while also creating an analytics report of the website's performance. Some of the data that are collected include the number of visitors, their source, and the pages they visit anonymously. |
at-rand | never | AddThis sets this cookie to track page visits, sources of traffic and share counts. |
CONSENT | 2 years | YouTube sets this cookie via embedded youtube-videos and registers anonymous statistical data. |
uvc | 1 year 1 month | Set by addthis.com to determine the usage of addthis.com service. |
Cookie | Duration | Description |
---|---|---|
pll_language | 1 year | The pll _language cookie is used by Polylang to remember the language selected by the user when returning to the website, and also to get the language information when not available in another way. |