| Weight | 0.1 kg |
|---|---|
| Dimensions | 25 × 20 × 10 cm |
| AKonlyne | Yes |
| Materials | Plastic |
| Product | |
| Pack | Single |
AK Points
AK Styrene 0,25 mm
Availability: In stock
2,00€
Description language || Idioma de la descripción:
ENGLISH
Styrene sheet for modelling, with a size of 245 X 195 mm and a weight of 52 gr. The thickness is 0.25 mm. Can be glued with many adhesives, plastic modelling adhesives, cyanoacrylate and PVA glue. Cut to the desire measure with the help of a sharp blade or with the help of our range of specialized tools. Be carefull when cutting.
*1 sheet.
Lámina de estireno para modelismo, con un tamaño de 245 X 195 mm y un peso de 52 gr. El espesor es de 0.25 mm. Se puede pegar con muchos adhesivos, adhesivos para maquetas de plástico, cianoacrilato y cola blanca. Corte a la medida deseada con la ayuda de una cuchilla afilada o con la ayuda de nuestra gama de herramientas especializadas. Tenga cuidado al cortar.
*1 lamina.
Custom Tab Content here.
Tail sed sausage magna quis commodo swine. Aliquip strip steak esse ex in ham hock fugiat in. Labore velit pork belly eiusmod ut shank doner capicola consectetur landjaeger fugiat excepteur short loin. Pork belly laboris mollit in leberkas qui. Pariatur swine aliqua pork chop venison veniam. Venison sed cow short loin bresaola shoulder cupidatat capicola drumstick dolore magna shankle.
Tail sed sausage magna quis commodo swine. Aliquip strip steak esse ex in ham hock fugiat in. Labore velit pork belly eiusmod ut shank doner capicola consectetur landjaeger fugiat excepteur short loin. Pork belly laboris mollit in leberkas qui. Pariatur swine aliqua pork chop venison veniam. Venison sed cow short loin bresaola shoulder cupidatat capicola drumstick dolore magna shankle.
Other people also completed their order with these products
AK183
5,25€
ENGLISH
ESPAÑOL
A high quality ultra matte varnish which can be applied with a brush or an airbrush to achieve a dead flat finish on any surface.
Acrylic Ultra Matte Varnish formulated for maximum airbrush performance. Water soluble, odorless, and non-toxic. Shake before each use. We recommend AK-712 Acrylic Thinner for thinning. Dries completely in 12 hours.
60 ml.
Barniz ultra mate de alta calidad que puede ser aplicado con pincel o con aerógrafo para lograr un acabado plano en cualquier superficie.
Barniz ultra mate acrílico formulado para el máximo rendimiento del aerógrafo. Soluble en agua, inodoro y no tóxico. Agitar antes de cada uso. Recomendamos AK-712 Acrylic Thinner para diluir. Se seca completamente en 12 horas.
60 ml.
MAGNET ULTRA RESISTANT CYANOCRYLATE GLUE
AK12015
7,60€
ENGLISH
ESPAÑOL
20g.
General-purpose cyanoacrylate 401. Fast drying, extra strong, low viscosity, specially formulated for adhesion between materials that can even have an acidic surface. Can be used with rubber, leather, wood, metal, resin and plastic. The surfaces to be joined must be free of dirt, dust and grease. A small amount of adhesive should be applied; more cyanoacrylate does not guarantee a better bond and makes more difficult the drying of the adhesive that is effective for bonding.
– 99% Cyano.
– Ethyl cyanoacrylate
– Use temperature: -55º to 120º
– Set time: between 3 and 10 seconds. The gaps and uneven surfaces can increase this setting time. It is not necessary to use clamps. Holding the pieces firmly for 10-30 seconds will ensure better adhesion.
– Definitive cure time: 24 h
– Viscosity: 110 mPa.S
– Shear strength: 21.0 MPa
* Bottles are not filled at a 100% to leave some air and make it work properly.
20g.
Cianoacrilato de uso general 401, secado rápido, extra fuerte, baja viscosidad especialmente formulado para la adhesión entre materiales que incluso pueden tener una superficie ácida. Se puede usar con caucho, cuero, madera, metal, resina y plástico. Las superficies a unir deben estar libres de suciedad, polvo y grasa. Se debe aplicar una pequeña cantidad de adhesivo; más cianoacrilato no garantiza una mejor unión y hace más difícil el secado del adhesivo que es efectivo para la unión.
– 99% Cyano
– Cianoacrilato de etilo
– Temperatura de uso: -55º a 120º
– Tiempo de fraguado: entre 3 y 10 segundos. Los huecos y las superficies irregulares pueden aumentar este tiempo de fraguado. No es necesario usar abrazaderas. Sostener las piezas firmemente durante 10-30 segundos asegurará una mejor adhesión.
– Tiempo de curado definitivo: 24 h.
– Viscosidad: 110 mPa.S
– Resistencia al corte: 21.0 MPa
*Las botellas no se llenan al 100% para dejar algo de aire y que funcione correctamente.
AK050
5,90€Our odorless turpentine is very different from our white spirit. Besides being odorless, this product is softer and less aggressive than our White Spirit. This property of the odorless thinner (Turpentine) makes it great for delicate, soft and subtle blending. This thinner is exclusive to enamel and oil paint. This larger bottle gives you more thinner and costs less when compared to buying three 35ml bottles.
FA 614
18,95€
ENGLISH
ESPAÑOL
A set designed for thorough cleaning of any airbrush.
A glass jar with a plastic screw cap is used to purge the airbrush with the cleaner after each use. Thanks to a special filter in the upper part, all impurities and liquid remain in the container. Additionally, the lid is equipped with an airbrush stand.
Cleaners and rods are used to thoroughly clean various elements of airbrushes: tips, nozzles, bodies and other elements. The needle, on the other hand, cleans the inside of the airbrush nozzle or other internal parts of the airbrush, such as the needle guide channel.
Container Height: 85mm, diameter: 100mm.
Un conjunto diseñado para la limpieza a fondo de cualquier aerógrafo.
Se usa un frasco de vidrio con un tapón de rosca de plástico para purgar el aerógrafo con el limpiador después de cada uso. Gracias a un filtro especial en la parte superior, todas las impurezas y líquidos permanecen en el recipiente. Además, la tapa está equipada con un soporte para aerógrafo.
Los limpiadores y las varillas se utilizan para limpiar a fondo varios elementos de los aerógrafos: puntas, boquillas, cuerpos y otros elementos. La aguja, por otro lado, limpia el interior de la boquilla del aerógrafo u otras partes internas del aerógrafo, como el canal de guía de la aguja.
Altura del contenedor: 85 mm, diámetro: 100 mm.
AK9204
6,50€ENGLISH Merchandising product.
Sport bottle.
Cruiser Aluminum Bottle 400ml – Black with White logo.
Aluminum. With carabiner. Capacity: 400 ml.
ESPAÑOL Producto de Merchandising.
Botella de deporte.
Botella Aluminio Cruiser 400ml – Negro con logo Blanco.
Aluminio. Con mosquetón. Capacidad: 400 ml.
ABT114
6,50€For precision works is necessary to keep the tip of your brushes in a perfect state. This gel is indicated to keep the tip sharp and in perfect use condition with all brushes fibers compacted and never open or deformed. With this gel you will keep your brushes always like new ones after using and cleaning them (it can be used after the application of our ABT117 Magic Potion for Brushes or any other chemical or natural cleaner).
AK9009
9,90€Description language || Idioma de la descripción:
ENGLISH
Precision cutting pliers with an ergonomic handle covered with an orange non-slip vinyl foam, with a spring return.
They make a clean and precise cut. No need to touch up.
Suitable for parts or rods of plastic, PVC, resin or ABS less than 4mm.
Do not use to cut metal parts.
Alicates de corte de precisión con mango ergonómico cubierto con espuma de vinilo naranja, antideslizante y con muelle de retorno.
Realizan un corte limpio y preciso sin que sea necesario retocar.
Adecuado para piezas o varillas de plástico, PVC, resina o ABS menores de 4mm.
No utilizar para cortar piezas de metal.
AK12004
4,95€
ENGLISH
ESPAÑOL
40 ml.
Special square anti rolling base.
Ultra-thin precision maxoma fiber brush.
1. Special density.
2. Glue by capillary action, quick drying.
The Extra Thin Citrus Cement glues by capillary action with a medium / fast drying time, and has a mild citrus aroma. It is undoubtedly the best option for general assembly work. Great performance with the perfect viscosity for plastic modeling.
*Same characteristics as our AK12002 Extra Thin Cement but with an aromatic touch.
40 ml.
Base especial antivuelco cuadrada.
Pincel de fibra maxoma de precisión ultrafina.
1. Densidad especial.
2. Pegamento por capilaridad, uniones muy rápidas.
El Extra Fino Cítrico tiene las características del pegamento extra fino pero con un aroma cítrico suave. Para pegar por capilaridad con un tiempo de secado medio / rápido, es sin duda la mejor opción para el trabajo de montaje general. Gran rendimiento con la viscosidad perfecta para modelar plástico.
*Las mismas características que nuestro AK12002 Extra Thin Cement pero con un toque aromático.
AK8064
12,75€The Wet Palette is a tool mainly used by figure painters, but more and more it is being used by people that paint with acrylics. It will extend the useful life of any acrylic so that it can be used for hours and once shut it will preserve the colors and color mixtures. It can be kept in the fridge.
It has three components:
1.Sponge, to hold large quantities of water, since it is quite thick.
2.Cloth made of fiber, placed on top of the sponge as a leveler, humidity filter, and as an interchangeable element in case of stains or if not used for a long time.
3.High quality special Paper, made of a fine silicone film, allows the transfer of humidity but prevents water forming and paints from dissolving, and does not give off any fibers not hairs when worked with the brushes.
The Wet Palette is watertight and airtight, made of the same material of marine containers for flares, charts, and medicines. Its locks guarantee the seal. This extends the life of paints, especially in Summer, hot climates, and under extreme conditions.
*Dimensions: 16 x 13 x 4 cm.
It contains:
?· Need more info? Click here
AK11505
7,95€
ENGLISH
ESPAÑOL
- Volume: 250ml
- Cleaning solution designed for removing acrylics from brushes and airbrushes and to clean any tool.
- It can also function as a lubricant when you want to leave and rest your airbrush for a couple of hours and want to keep the needle clean.
- Special cap for a comfortable and controllable use.
ESPAÑOL
- Volumen: 250ml
- Solución de limpieza diseñada para eliminar acrílicos de pinceles y aerógrafos y para limpiar cualquier herramienta.
- También puede funcionar como lubricante cuando quieras dejar y descansar tu aerógrafo durante un par de horas y quieras mantener la aguja limpia.
- Tapón especial para un uso cómodo y controlable.
AK183
5,25€
ENGLISH
ESPAÑOL
A high quality ultra matte varnish which can be applied with a brush or an airbrush to achieve a dead flat finish on any surface.
Acrylic Ultra Matte Varnish formulated for maximum airbrush performance. Water soluble, odorless, and non-toxic. Shake before each use. We recommend AK-712 Acrylic Thinner for thinning. Dries completely in 12 hours.
60 ml.
Barniz ultra mate de alta calidad que puede ser aplicado con pincel o con aerógrafo para lograr un acabado plano en cualquier superficie.
Barniz ultra mate acrílico formulado para el máximo rendimiento del aerógrafo. Soluble en agua, inodoro y no tóxico. Agitar antes de cada uso. Recomendamos AK-712 Acrylic Thinner para diluir. Se seca completamente en 12 horas.
60 ml.
MAGNET ULTRA RESISTANT CYANOCRYLATE GLUE
AK12015
7,60€
ENGLISH
ESPAÑOL
20g.
General-purpose cyanoacrylate 401. Fast drying, extra strong, low viscosity, specially formulated for adhesion between materials that can even have an acidic surface. Can be used with rubber, leather, wood, metal, resin and plastic. The surfaces to be joined must be free of dirt, dust and grease. A small amount of adhesive should be applied; more cyanoacrylate does not guarantee a better bond and makes more difficult the drying of the adhesive that is effective for bonding.
– 99% Cyano.
– Ethyl cyanoacrylate
– Use temperature: -55º to 120º
– Set time: between 3 and 10 seconds. The gaps and uneven surfaces can increase this setting time. It is not necessary to use clamps. Holding the pieces firmly for 10-30 seconds will ensure better adhesion.
– Definitive cure time: 24 h
– Viscosity: 110 mPa.S
– Shear strength: 21.0 MPa
* Bottles are not filled at a 100% to leave some air and make it work properly.
20g.
Cianoacrilato de uso general 401, secado rápido, extra fuerte, baja viscosidad especialmente formulado para la adhesión entre materiales que incluso pueden tener una superficie ácida. Se puede usar con caucho, cuero, madera, metal, resina y plástico. Las superficies a unir deben estar libres de suciedad, polvo y grasa. Se debe aplicar una pequeña cantidad de adhesivo; más cianoacrilato no garantiza una mejor unión y hace más difícil el secado del adhesivo que es efectivo para la unión.
– 99% Cyano
– Cianoacrilato de etilo
– Temperatura de uso: -55º a 120º
– Tiempo de fraguado: entre 3 y 10 segundos. Los huecos y las superficies irregulares pueden aumentar este tiempo de fraguado. No es necesario usar abrazaderas. Sostener las piezas firmemente durante 10-30 segundos asegurará una mejor adhesión.
– Tiempo de curado definitivo: 24 h.
– Viscosidad: 110 mPa.S
– Resistencia al corte: 21.0 MPa
*Las botellas no se llenan al 100% para dejar algo de aire y que funcione correctamente.
AK050
5,90€Our odorless turpentine is very different from our white spirit. Besides being odorless, this product is softer and less aggressive than our White Spirit. This property of the odorless thinner (Turpentine) makes it great for delicate, soft and subtle blending. This thinner is exclusive to enamel and oil paint. This larger bottle gives you more thinner and costs less when compared to buying three 35ml bottles.
FA 614
18,95€
ENGLISH
ESPAÑOL
A set designed for thorough cleaning of any airbrush.
A glass jar with a plastic screw cap is used to purge the airbrush with the cleaner after each use. Thanks to a special filter in the upper part, all impurities and liquid remain in the container. Additionally, the lid is equipped with an airbrush stand.
Cleaners and rods are used to thoroughly clean various elements of airbrushes: tips, nozzles, bodies and other elements. The needle, on the other hand, cleans the inside of the airbrush nozzle or other internal parts of the airbrush, such as the needle guide channel.
Container Height: 85mm, diameter: 100mm.
Un conjunto diseñado para la limpieza a fondo de cualquier aerógrafo.
Se usa un frasco de vidrio con un tapón de rosca de plástico para purgar el aerógrafo con el limpiador después de cada uso. Gracias a un filtro especial en la parte superior, todas las impurezas y líquidos permanecen en el recipiente. Además, la tapa está equipada con un soporte para aerógrafo.
Los limpiadores y las varillas se utilizan para limpiar a fondo varios elementos de los aerógrafos: puntas, boquillas, cuerpos y otros elementos. La aguja, por otro lado, limpia el interior de la boquilla del aerógrafo u otras partes internas del aerógrafo, como el canal de guía de la aguja.
Altura del contenedor: 85 mm, diámetro: 100 mm.
AK9204
6,50€ENGLISH Merchandising product.
Sport bottle.
Cruiser Aluminum Bottle 400ml – Black with White logo.
Aluminum. With carabiner. Capacity: 400 ml.
ESPAÑOL Producto de Merchandising.
Botella de deporte.
Botella Aluminio Cruiser 400ml – Negro con logo Blanco.
Aluminio. Con mosquetón. Capacidad: 400 ml.
ABT114
6,50€For precision works is necessary to keep the tip of your brushes in a perfect state. This gel is indicated to keep the tip sharp and in perfect use condition with all brushes fibers compacted and never open or deformed. With this gel you will keep your brushes always like new ones after using and cleaning them (it can be used after the application of our ABT117 Magic Potion for Brushes or any other chemical or natural cleaner).
May be you are interested on
splatter effects wet ground 100ML
AK8029
4,95€Splatter Wet Ground has been formulated for creating wet ground splattering and accumulation on vehicles, diorama’s, and vignettes. Wet Ground is just the right consistency; easily handled by brush, creating realistic textures of accumulated wet ground and dirt on lower vehicle surfaces has never been easier. Ideal the final touches of variable textured ground to your model or terrain. Can be splashed using a brush and directing the flow of air of your airbrush
It can be diluted with water or an acrylic thinner to improve its flow. No toxic
AK8007
5,95€The perfect product for recreating any type of moving water effects from the bow wake of any vessel, to waves, ripples, and waterfalls. Creating any moving effect is easy with this clear 1-part, low odour water based resin product that holds its shape, even on a vertical surface. This is a high quality acrylic product developed for extreme realism.
Acrylic product for foam and wave effects. It can be diluted with water or an acrylic thinner to improve its flow.
It can be worked with any tool during drying time. No toxic
light & dry crackle effects 100ML
AK8033
8,50€Light and Dry Crackle Effects has been formulated for creating dry and crackled soil on the lower surfaces of vehicles, diorama’s, and vignettes. This product has been composed for the creation of perfect scale correct crackle effects every time. Over an acrylic base, use a thin layer and let dry. No toxic
AK8015
8,95€Dry Ground texture is the perfect product and color for recreating any dry soil or arid natural surface. Allow 24 hours to completely dry; prior to drying, wheel, or track marks, whatever you wish can be pressed into the surface. This is a high quality acrylic product developed for extreme realism.
Acrylic product for textures in dioramas. Perfect results in thin or thick layers. It can be diluted with water or an acrylic thinner to improve its flow. No toxic
AK8011
8,95€The perfect product to create a snow texture on any surface – terrain, vehicle or building. This is a high quality acrylic product developed for extreme realism.
Acrylic product for textures in dioramas. Perfect results in thin or thick layers. It can be diluted with water or an acrylic thinner to improve its flow. No toxic
AK8034
8,50€Wet Crackle Effects has been formulated for creating wet crackled soil on the lower surfaces of vehicles, diorama’s, and vignettes. This product has been composed for the creation of perfect scale correct crackle effects every time.
Over an acrylic base, use a thin layer and let dry. No toxic
AK8006
8,95€Brown-Green dense gel for swamp waters. To create a sense of depth, apply the gel over a painted surface. Drying time is dependent on the amount used; however, 24 hours is what we recommend. This is a high quality acrylic product developed for extreme realism. Acrylic product for textures in dioramas. Perfect results in layers from 0.1 to 3 mm. It can be diluted with water or an acrylic thinner to improve its flow. No toxic
AK8028
5,60€Puddles is a slightly tinted especially liquid crystalline product designed to replicate small puddles and standing dirty water on your dioramas and vignettes. Puddles is self-leveling and capable of flowing over uneven surfaces; apply thin layers, no more than 3 mm at a time. If depth is desired, build up thin layers. Its composition allows easy handling with a brush achieving a very realistic texture. High quality acrylic product. Non toxic
AK8018
8,95€Dark Earth is the perfect product for recreating rich dark shades of earth on diorama or vignette bases where a thick and dense texture is desired. This is a high quality acrylic product developed for extreme realism.
Acrylic product for textures in dioramas. Perfect results in thin or thick layers. It can be diluted with water or an acrylic thinner to improve its flow. No toxic
AK8008
9,95€
ENGLISH
ESPAÑOL
Still Water is a liquid crystalline product specially designed to reproduce the effect of clear still water on dioramas and vignettes.
Still Water is self-leveling and capable of flowing over uneven surfaces; apply thin layers, between 1 and 2 mm maximum.
If depth is desired, build up thin layers.
When applied on non-porous surfaces, such as glass, this product can be lifted and cut to desired shape.
High quality acrylic product.
This product can be tinted with acrylics offering many possibilities.
No toxic
*Check this video to see how to apply it:
Still Water es un producto cristalino líquido especialmente diseñado para reproducir el efecto del agua sin gas clara en dioramas y viñetas.
Still Water es autonivelante y capaz de fluir sobre superficies irregulares; aplique capas delgadas, de 1 o 2 mm como mucho.
Si desea profundidad, cree capas delgadas.
Cuando se aplica sobre superficies no porosas, como el vidrio, este producto se puede levantar y cortar a la forma deseada.
Producto acrílico de alta calidad.
Este producto se puede teñir con acrílicos ofreciendo muchas posibilidades.
No tóxico
*Mira este video para ver como aplicar el producto:
dark & dry crackle effects 100ML
AK8032
8,50€
ENGLISH
ESPAÑOL
Dark and Dry Crackle Effects has been formulated for creating dark and crackled soil on the lower surfaces of vehicles, dioramas, and vignettes.
This product has been composed for the creation of perfect scale correct crackle effects every time.
Over an acrylic base, use a thin layer and let dry.
No toxic
Dark and Dry Crackle Effects se ha formulado para crear suelos oscuros y crujidos en las superficies inferiores de vehículos, dioramas y viñetas.
Este producto ha sido compuesto para la creación de efectos de craquelado correctos de escala perfecta en todo momento.
Sobre una base acrílica, use una capa fina y deje secar.
No tóxico
AK8040
8,50€Corrosion texture is an acrylic product that has been formulated for creating surface textures such as corrosion on vehicles, or any element of your dioramas, and vignettes. The composition of this product allows extremely realistic, scale correct textures every time. Corrosion texture is best applied in a thin layer; once dry incorporate pigments for more chromatic tones. No toxic
splatter effects wet ground 100ML
AK8029
4,95€Splatter Wet Ground has been formulated for creating wet ground splattering and accumulation on vehicles, diorama’s, and vignettes. Wet Ground is just the right consistency; easily handled by brush, creating realistic textures of accumulated wet ground and dirt on lower vehicle surfaces has never been easier. Ideal the final touches of variable textured ground to your model or terrain. Can be splashed using a brush and directing the flow of air of your airbrush
It can be diluted with water or an acrylic thinner to improve its flow. No toxic
AK8007
5,95€The perfect product for recreating any type of moving water effects from the bow wake of any vessel, to waves, ripples, and waterfalls. Creating any moving effect is easy with this clear 1-part, low odour water based resin product that holds its shape, even on a vertical surface. This is a high quality acrylic product developed for extreme realism.
Acrylic product for foam and wave effects. It can be diluted with water or an acrylic thinner to improve its flow.
It can be worked with any tool during drying time. No toxic
light & dry crackle effects 100ML
AK8033
8,50€Light and Dry Crackle Effects has been formulated for creating dry and crackled soil on the lower surfaces of vehicles, diorama’s, and vignettes. This product has been composed for the creation of perfect scale correct crackle effects every time. Over an acrylic base, use a thin layer and let dry. No toxic
AK8015
8,95€Dry Ground texture is the perfect product and color for recreating any dry soil or arid natural surface. Allow 24 hours to completely dry; prior to drying, wheel, or track marks, whatever you wish can be pressed into the surface. This is a high quality acrylic product developed for extreme realism.
Acrylic product for textures in dioramas. Perfect results in thin or thick layers. It can be diluted with water or an acrylic thinner to improve its flow. No toxic